Equipment & hook-up wires

Single-core and multicore automotive primary wires, halogen-free EN 50264 and EN 50306 rolling-stock cables, UL AWM panel hook-up wires and high-voltage DC equipment leads.

How does the cable move?

Pick one or more duties — the list below updates.

Choosing equipment & hook-up wires

Four things decide most selections. Our engineers check the rest against your application.

Application and movement duty

Define whether the cable runs in a fixed tray, energy chain, festoon loop, reel or trailing route.
Match travel speed, bend radius and tensile load to the mechanical construction.
Select a support element or armour when the cable carries suspended weight or external crush loads.

Voltage class and core layout

Match the rated voltage U0/U to the supply system and earthing arrangement.
Specify phase cross-sections, protective earth, pilot cores or control pairs required by the machine.
Include copper braid, tape or semiconductive screens where EMC or electric-field control is needed.

Operating environment and sheath

Choose rubber, PUR, LSZH, PVC, fluoropolymer or silicone sheaths for the thermal and chemical exposure.
Verify oil, UV, water immersion, cold-flex or circuit-integrity ratings against site conditions.
Check outer diameter and gland compatibility at both terminations.

Standard and documentation

Confirm the governing standard family required by the project specification.
Verify conductor class, colour code or core numbering for the destination region.
Include operating duty and cable length in your enquiry so we can confirm the build.

Filter the range by standard

Questions buyers ask

Not covered here? Send your drawing and an engineer replies within 2 business hours.

Ask on WhatsApp

How do I select the right equipment wire from this range?

Start by filtering the list by movement duty, voltage band and sheath material. Compare how each equipment wire is constructed—conductor flexibility, insulation compound, screening and outer jacket—against your machine's bending radius, travel speed and ambient temperature. Open the product page or datasheet to check core counts, cross-sections and outer diameters before sending your enquiry.

When should equipment & hook-up wires include metallic screening or armour?

Specify a copper braid or foil screen when equipment & hook-up wires run near variable-frequency drives, carry analogue or fieldbus signals, or require medium-voltage electric-field control. Choose steel wire braid or armour when the installation faces rock fall, crushing loads or high pulling tension in roadways, decks or subsea routes.

Which outer sheath compound suits harsh industrial environments?

Heavy-duty rubber (PCP or CPE) provides balanced mechanical toughness, weather resistance and thermal stability. Polyurethane (PUR) resists cuts, abrasion and mineral oils on fast-moving chains, reels and trolleys. Halogen-free LSZH compounds reduce smoke and acid gas in tunnels, ships and enclosed buildings, while fluoropolymers and silicone handle extreme heat.

What details should I include in an RFQ for equipment & hook-up wires?

Include the model designation or governing standard, rated voltage, number of cores and conductor cross-sections, along with the installation method, minimum bend radius, ambient temperature range and required delivery lengths. If you are replacing an existing cable on a machine, share the sheath marking so we can match the specification.

Engineering reference

Background on how equipment & hook-up wires are built, rated and specified.

Read the full reference

Equipment & hook-up wires cover industrial constructions engineered for reliable electrical transmission under defined mechanical, thermal and environmental stresses. Selecting the right build requires matching conductor stranding, insulation system, screening and outer sheath compound to the actual installation route rather than relying on nominal cross-section alone.

Across the TEBAOFLEX equipment & hook-up wires portfolio, models are grouped into functional families so engineers can filter by duty, voltage band, standard family and jacket compound. Each construction addresses a specific balance of flexibility, dielectric strength, electromagnetic compatibility and resistance to oil, water, UV radiation or flame propagation.

Before finalizing a specification, verify the governing national or international standard, operating voltage U0/U, ambient temperature range and minimum bending radius in fixed or moving duty. Where cables interface with connectors, glands or motor terminal boxes, check nominal outer diameter and screen termination geometry early.

When submitting an RFQ for equipment & hook-up wires, specify the model designation, core count and cross-sections, system voltage, installation method, environmental exposure and required drum or assembly lengths so our engineering team can confirm the exact construction and datasheet.

Equipment & hook-up wires

How does the cable move?

67 equipment & hook-up wires

Automotive harness wires

Rolling-stock & shipboard wire

UL AWM & high-voltage leads

Choosing equipment & hook-up wires

Application and movement duty

Voltage class and core layout

Operating environment and sheath

Standard and documentation

Questions buyers ask

Engineering reference

Compare cables

Filters

Duty

Voltage

Standard

Sheath

Features