1 / 5

Product

UL 1813 3000 VAC 200 °C FEP hook-up wire UL AWM 18133000 VAC / +200 °CFEP Fluoropolymer

UL 1813 3000 VAC 200 °C FEP High-Voltage Hook-Up WireUL AWM Style 1813 / CSA · 3000 VAC · -80 °C to +200 °C single-wall FEP fluoropolymer lead wire

Flame-retardant

Oil-resistant

Approved

Ozone, UV & moisture

Configuration

Order designation: UL 1813 22 AWG (7/30) 3000 VAC FEP
Outer Ø ≈: 2.1 mm
Weight ≈: 8 kg/km
Tensile load ≈: 0.1 kN
Core / stranding: 7/0.254 mm tinned Cu + FEP

All sizes (6)

Request a quote Datasheet WhatsApp info@tebaoflex.com

Engineering reply in 2 business hoursCut-to-length export drumsEN 10204 3.1 certificate per drum

Rated voltage: 3000 VAC
Operating temp.: −80…+200 °C
Min. bend radius: 5 × OD
Core / conductor: 24–10 AWG Cu
Outer protection: 0.64 mm FEP
Standard: UL AWM 1813

Typical values for this cable type, based on UL AWM Style 1813 / UL 758 — confirmed in the datasheet and quotation for your order.

Application fit

Is UL 1813 right for your machine?

Switchgear & control cabinet wiring

Suitable

UL AWM Style 1813 recognized for 3000 VAC internal wiring of electronic appliances, HV ballasts and switchgear.

Furnace, kiln & high-temp zone

Suitable

Continuous −80…+200 °C fluoropolymer thermal rating with UL VW-1 flame resistance and solder-iron immunity.

Motor stator, traction & converter leads

Suitable

Resists transformer oils, varnishes, baking cycles and chemical solvents in motor and coil terminations.

Motorised monospiral reel

Not suitable

Single-core internal appliance hook-up wire per UL 758; not for external mechanical reeling.

(N)7YRDGOEU-J

Typical machinesAerospace & AvionicsHigh-Voltage Transformers, Igniters & Lamp BallastsMedical Diagnostic, Sterilization & Laboratory CabinetsIndustrial Ovens, Commercial Kitchen & Heating EquipmentPower Electronics, Inverters & Switchgear Harnessing

Construction

Layer by layer

Shown: UL 1813 (UL AWM Style 1813 / UL 758) featuring stranded conductor (22 awg), tin surface plating and 3 kv fep primary insulation (3-layer construction).

Schematic, not to scale — generated from the layer data

#	Layer	Material & reference
1	Stranded Conductor (22 AWG)	22 AWG (7 x 0.254 mm / 0.355 mm², OD 0.76 mm) concentric stranded annealed copper conductor for compact HV equipment wiringUL AWM Style 1813 / UL 758
2	Tin Surface Plating	Uniform electrolytic tin coating over each copper strand ensuring solderability and oxidation resistance up to 200 °CUL AWM Style 1813 / UL 758
3	3 kV FEP Primary Insulation	Single-wall extruded fluorinated ethylene propylene (FEP) fluoropolymer insulation (min. wall 0.64 mm / 25 mil, OD 2.13 mm) rated 3000 VAC, 200 °C, VW-1UL AWM Style 1813 / UL 758

UL 1813 — Standard Execution

Built to UL AWM Style 1813 / UL 758 with stranded conductor (22 awg) and 3 kv fep primary insulation

UL 1813 — Custom Length & Configuration

Available in custom drum lengths, core counts or factory-terminated assemblies

UL 1813 — Factory Routine Certified

Supplied with EN 10204 3.1 routine electrical, dielectric & dimensional inspection report

Technical data

Ratings & operating limits

Typical values: Typical values for this cable type, based on UL AWM Style 1813 / UL 758. Values for your order are confirmed in the datasheet and quotation.

Electrical

Rated voltage / transmission duty: 3000 VAC (UL AWM Style 1813 / UL 758)
Core / conductor construction: Stranded Conductor (22 AWG) — 22 AWG (7 x 0.254 mm / 0.355 mm², OD 0.76 mm) concentric stranded annealed copper conductor for compact HV equipment wiring
Primary dielectric / insulation: Tin Surface Plating — Uniform electrolytic tin coating over each copper strand ensuring solderability and oxidation resistance up to 200 °C

Thermal

Continuous operating temperature: −80…+200 °C (rated operating envelope)
Storage & transport temperature: −40…+80 °C on export drum or reel

Mechanical

Outer protection / sheath: 3 kV FEP Primary Insulation — Single-wall extruded fluorinated ethylene propylene (FEP) fluoropolymer insulation (min. wall 0.64 mm / 25 mil, OD 2.13 mm) rated 3000 VAC, 200 °C, VW-1
Minimum bending radius: 5 × OD
Structural layer count: 3 concentric functional layers

Resistance

Environmental & chemical resistance: Industrial moisture, oils and mechanical wear per UL AWM Style 1813 / UL 758
RoHS & REACH compliance: RoHS 2 (2011/65/EU + 2015/863) & REACH SVHC compliant

Reference standards

Governing standard: UL AWM Style 1813 / UL 758
Quality management & inspection: ISO 9001:2015 & EN 10204 3.1 factory routine inspection

Identification

Model designation: UL 1813
Customs tariff (HS): 8544.49 / 8544.60 / 8544.70

Sizes

6 standard UL 1813 configurations

Manufactured to UL AWM Style 1813 / UL 758 for heavy-duty industrial and specialty engineering systems.

Dimensions, tensile ratings & weights
Order designation	Configuration	Core / stranding	Outer Ø ≈ mm	Weight ≈ kg/km	Tensile load kN ≈	Min. bend R mm
UL 1813 Construction Schedule (−80…+200 °C)
UL 1813 24 AWG (7/32) 3000 VAC FEP	1 × 24 AWG (0.23 mm²)	7/0.203 mm tinned Cu + FEP	1.9	6	0.1	10
UL 1813 22 AWG (7/30) 3000 VAC FEP	1 × 22 AWG (0.35 mm²)	7/0.254 mm tinned Cu + FEP	2.1	8	0.1	11
UL 1813 20 AWG (19/32) 3000 VAC FEP	1 × 20 AWG (0.61 mm²)	19/0.203 mm tinned Cu + FEP	2.3	11	0.2	12
UL 1813 18 AWG (19/30) 3000 VAC FEP	1 × 18 AWG (0.96 mm²)	19/0.254 mm tinned Cu + FEP	2.5	15	0.3	13
UL 1813 16 AWG (19/29) 3000 VAC FEP	1 × 16 AWG (1.23 mm²)	19/0.287 mm tinned Cu + FEP	2.8	19	0.4	14
UL 1813 14 AWG (19/27) 3000 VAC FEP	1 × 14 AWG (1.94 mm²)	19/0.361 mm tinned Cu + FEP	3.2	27	0.6	16

Typical values for this cable type; dimensions and weights for your order are confirmed in the quotation.
Custom core counts, cross-sections, sheath colours and factory-tested cut lengths available per UL AWM Style 1813 / UL 758.

Electrical, optical & thermal parameters
Configuration	Max. DC R₂₀ / Atten. Ω/km or dB/km	Rating / Capacity	Operating temp.
24 AWG (0.23 mm²)	84.20	3000 VAC / 6.5 A	−80…+200 °C
22 AWG (0.35 mm²)	54.30	3000 VAC / 9.0 A	−80…+200 °C
20 AWG (0.61 mm²)	32.10	3000 VAC / 13.0 A	−80…+200 °C
18 AWG (0.96 mm²)	20.60	3000 VAC / 18.0 A	−80…+200 °C
16 AWG (1.23 mm²)	15.80	3000 VAC / 22.0 A	−80…+200 °C
14 AWG (1.94 mm²)	9.90	3000 VAC / 30.0 A	−80…+200 °C

Every production length undergoes routine conductor DC resistance, high-voltage dielectric and dimensional verification.

Quality & approvals

Testing & inspection

Routine tests on every production length, sample and type tests per batch — documented on an EN 10204 3.1 inspection certificate.

ConductorClass 5 stranding
Spark test100 % in-line
Lay-upCores, earth, fillers
SheathingInner, braid / screen, outer
Electrical testsAC voltage, resistance
DimensionsOD, wall thickness
Inspection documents & dispatchDrum & dispatch

Testing & inspection	Test value / reference	Frequency
Routine tests
Conductor resistance & dimensional verification (UL AWM Style 1813 / UL 758)	Electrical parameters and outer diameter within UL AWM Style 1813 / UL 758 tolerances	Every manufactured drum / length
High-voltage dielectric & insulation resistance test (UL AWM Style 1813 / UL 758)	Zero dielectric breakdown and verified insulation resistance over full length	Every manufactured drum / length
Sample tests
Thermal ageing, mechanical flexing & environmental qualification (UL AWM Style 1813 / UL 758)	Verified structural and dielectric integrity across −80…+200 °C	Type qualification & periodic lot audit

Inspection certificate

Issued with every drum, listing the routine test results for that length.

Product approvals

UL AWM 1813 CompliantEN 10204 3.1 Factory Test CertificateCE, RoHS 2 (2011/65/EU) & REACH

Company certificates

ISO 9001ISO 14001ISO 45001VDE marks approvalUL / cULCE · LVD / EMC

Marking & supply

Ordering & delivery

Sheath marking

TEBAOFLEX UL 1813 UL AWM 1813 3000 VAC CE

Delivery form: Heavy-duty export wooden/steel drums or factory-tested coils
Standard lengths: 100 m, 250 m, 500 m, 1,000 m or custom cut-to-length reels
MOQ: 100 m (standard configurations) · 300 m (custom builds)
Lead time: 2–4 weeks ex-works
Incoterms: EXW, FCA, FOB, CIF, DAP

Technical documents

Downloads

PDFUL 1813 3000 VAC 200 °C FEP High-Voltage Hook-Up Wire – technical datasheet6 sizes · construction, technical data, approvals XLSXUL 1813 spec data (Excel)All 6 sizes with dimensions and data, for your BOM or quotation

Revision: 2026-10-23
Updated: 2026-10-23

FAQ

Questions engineers ask first

Not covered here? Send your drawing — an engineer replies within 2 business hours.

What applications is UL 1813 engineered for?

UL 1813 3000 VAC +200 °C high-voltage appliance and equipment hook-up wire combining concentric stranded tinned copper conductors with a 0.64 mm (25 mil) single-wall extruded FEP fluoropolymer insulation. It is built to UL AWM Style 1813 / UL 758 for high-voltage transformers, igniters & lamp ballasts and medical diagnostic, sterilization & laboratory cabinets.

What are the minimum bending radius and operating temperature range for UL 1813?

The minimum bending radius for UL 1813 is 5 × OD across its continuous operating temperature range of -80 °C to +200 °C, ensuring mechanical and dielectric stability in industrial service.

How are the concentric layers of UL 1813 arranged from inside to outside?

From inside to outside, the construction sequence is: (01) Stranded Conductor (22 AWG) (22 AWG (7 x 0.254 mm / 0.355 mm², OD 0.76 mm) concentric stranded annealed copper conductor for compact HV equipment wiring); (02) Tin Surface Plating (Uniform electrolytic tin coating over each copper strand ensuring solderability and oxidation resistance up to 200 °C); (03) 3 kV FEP Primary Insulation (Single-wall extruded fluorinated ethylene propylene (FEP) fluoropolymer insulation (min. wall 0.64 mm / 25 mil, OD 2.13 mm) rated 3000 VAC, 200 °C, VW-1).

What factory test certificates are supplied with UL 1813?

Every production drum of UL 1813 undergoes routine electrical continuity, high-voltage dielectric and dimensional testing per UL AWM Style 1813 / UL 758, and is delivered with an EN 10204 3.1 factory test certificate.

Request a quote

Get an engineering quote for UL 1813

Your selection and application details are copied into the enquiry form below.

01Selected sizes

Use + Add next to a size or configuration.

02Reel & motion

Add your operating conditions here to include them in your enquiry.

Reel typeDrum core diameter (mm)Cable length on drum (m)Travel speed (m/min)Max. accelerationCycles per hourLength and quantityAmbient temperatureExposure (outdoor, water, oil, abrasion)Destination countryEquipment and operating conditions

03Message for our engineers

UL 1813 3000 VAC 200 °C FEP High-Voltage Hook-Up Wire

Selected sizes:


Reel & motion:
- Reel type: 
- Drum core diameter (mm): 
- Cable length on drum (m): 
- Travel speed (m/min): 
- Max. acceleration: 
- Cycles per hour: 
- Length and quantity: 
- Ambient temperature: 
- Exposure (outdoor, water, oil, abrasion): 
- Destination country: 
- Equipment and operating conditions:

Send via WhatsApp