1 / 5

Product

Medium-voltage screened submersible pump & dredger cable DIN VDE 0250-8133.6/6–12/20 kV MV300 m Submersion

(N)TSCGECEWÖU MT PLUS 3.6/6–12/20 kV Submersible MV CableVDE 0250-813 · 3.6/6 kV · Medium-voltage screened submersible pump & dredger cable

(N)TSCGECEWÖU 3.6/6–12/20 kV (MV Submersible Individually Copper-Braided MV Submersible Pump/Dredger Cable) & MT PLUS 3.6/6 kV (WRAS/ACS MV Potable-Water Cable) (VDE 0250-813, 3.6/6 kV, -25 °C to +90 °C, min. bend radius 10 × OD).

Water-resistant

EMC screen

Oil-resistant

Approved

Configuration

Order designation: (N)TSCGECEWÖU MT P 4G16 mm²
Outer Ø ≈: 21.8 mm
Net weight ≈: 840 kg/km
Tensile rating ≈: 2.4 kN
Core / stranding: IEC 60228 Class 5 flexible Cu/SnCu

All sizes (3)

Request a quote Datasheet WhatsApp info@tebaoflex.com

Engineering reply in 2 business hoursCut-to-length export drumsEN 10204 3.1 certificate per drum

Rated voltage: 3.6/6 kV
Operating temp.: −25…+90 °C
Min. bend radius: 10 × OD
Core / conductor: 3×25–120 mm²
Outer protection: 5GM3 CM/Blue EM6
Standard: VDE 0250-813

Typical values for this cable type, based on DIN VDE 0250-813 / WRAS / ACS — confirmed in the datasheet and quotation for your order.

Application fit

Is (N)TSCGECEWÖU MT PLUS right for your machine?

Immersion & wet locations

Suitable

Cross-linked submersible elastomer compound is qualified for continuous deep-well, potable-water or sewage immersion.

Free-hanging vertical run

Suitable

High-modulus conductor and elastomer construction supports vertical suspension in deep boreholes and pump risers.

Trailing & towing

Suitable

Tear- and abrasion-resistant rubber outer sheath handles mobile dewatering, dredger and portable pump deployment.

Fixed installation

Suitable

Suitable for permanent wet-well, treatment tank, geothermal borehole and submergedmanifold installations.

Energy chain / drag chain

Not suitable

Submersible rubber pump cable is not intended for high-acceleration automation drag chains.

Use Drag-Chain Control Cable

Typical machinesDeep-Well Potable Water PumpingMunicipal Sewage & Wastewater PlantsMine Dewatering & Slurry DredgingGeothermal, Spa & Pool Installations

Construction

Layer by layer

Shown: (N)TSCGECEWÖU MT PLUS (DIN VDE 0250-813 / WRAS / ACS) featuring class 5 tinned copper mv conductors, triple-extruded 3gi3 epr mv insulation and 5gm3 cm / blue em6 potable-water sheath (5-layer construction).

Schematic, not to scale — generated from the layer data

#	Layer	Material & reference
1	Class 5 Tinned Copper MV Conductors	Flexible stranded tinned copper conductors rated for 3.6/6 kV up to 12/20 kV
2	Triple-Extruded 3GI3 EPR MV Insulation	Semiconductive conductor screen + 3GI3 EPR dielectric + outer semiconductive screen
3	Individual Copper Braid Phase Screen (CE)	Each phase core has its own bare copper braid shield (or 3 split earths in MT PLUS)
4	Reinforced Cradle & GM1b Waterproof Inner	Central reinforced rubber cradle + semicon tape + waterproof GM1b EPR inner sheath
5	5GM3 CM / Blue EM6 Potable-Water Sheath	Black 5GM3 CM (MV Submersible) or Blue WRAS/ACS EM6 (MT PLUS, 300 m)

(N)TSCGECEWÖU MT PLUS — Standard Subsea & Marine Execution

Built to DIN VDE 0250-813 / WRAS / ACS with class 5 tinned copper mv conductors and 5gm3 cm / blue em6 potable-water sheath

(N)TSCGECEWÖU MT PLUS — Custom Drum Length & Termination Kit

Available in custom continuous subsea/wellbore drum lengths or pre-terminated assemblies

(N)TSCGECEWÖU MT PLUS — Routine & Hydrostatic Test Certified

Supplied with EN 10204 3.1 routine dielectric, resistance & pressure/dimensional report

Technical data

Ratings & operating limits

Typical values: Typical values for this cable type, based on DIN VDE 0250-813 / WRAS / ACS. Values for your order are confirmed in the datasheet and quotation.

Electrical

Rated voltage / transmission duty: 3.6/6 kV (DIN VDE 0250-813 / WRAS / ACS)
Core / conductor construction: Class 5 Tinned Copper MV Conductors — Flexible stranded tinned copper conductors rated for 3.6/6 kV up to 12/20 kV
Primary dielectric / buffering: Triple-Extruded 3GI3 EPR MV Insulation — Semiconductive conductor screen + 3GI3 EPR dielectric + outer semiconductive screen

Thermal

Continuous operating temperature: −25…+90 °C (subsea, marine & submersible duty)
Short-circuit / peak thermal rating: Verified thermal stability per DIN VDE 0250-813 / WRAS / ACS
Storage & transport temperature: −40…+80 °C on export wooden/steel drum

Mechanical

Outer protection / armouring: 5GM3 CM / Blue EM6 Potable-Water Sheath — Black 5GM3 CM (MV Submersible) or Blue WRAS/ACS EM6 (MT PLUS, 300 m)
Minimum bending radius: 10 × OD
Hydrostatic, tensile & crush duty: Reinforced Cradle & GM1b Waterproof Inner — Central reinforced rubber cradle + semicon tape + waterproof GM1b EPR inner sheath

Resistance

Hydrostatic pressure & water blocking: Engineered for continuous submersion and hydrostatic integrity per DIN VDE 0250-813 / WRAS / ACS
Seawater, oil & chemical resistance: Resistant to seawater hydrolysis, hydraulic oils and abrasion per DIN VDE 0250-813 / WRAS / ACS
RoHS & REACH compliance: RoHS 2 (2011/65/EU + 2015/863) & REACH SVHC compliant

Reference standards

Governing standard: DIN VDE 0250-813 / WRAS / ACS
Environmental & test standards: IEC 60228 / IEC 60332 / ISO 13628-5 / EN 10204
Quality management & inspection: ISO 9001:2015 & EN 10204 3.1 factory routine inspection

Identification

Model designation: (N)TSCGECEWÖU MT PLUS
Sheath colour & metre marking: Continuous metre-marked blue outer finish (5GM3 CM / Blue EM6)
Customs tariff (HS): 8544.49 / 8544.60 / 8544.70

Sizes

3 standard (N)TSCGECEWÖU MT PLUS subsea & marine configurations

Manufactured to DIN VDE 0250-813 / WRAS / ACS for subsea, offshore, deep-well and marine applications.

Dimensions, tensile load & weights
Order designation	Configuration	Core / stranding	Outer Ø ≈ mm	Net weight ≈ kg/km	Tensile rating kN ≈	Min. bend R mm
(N)TSCGECEWÖU MT PLUS Construction Schedule (−25…+90 °C)
(N)TSCGECEWÖU MT P 4G16 mm²	4G16 mm² (3×16 + 1G16)	IEC 60228 Class 5 flexible Cu/SnCu	21.8	840	2.4	130
(N)TSCGECEWÖU MT P 4G35 mm²	4G35 mm² (3×35 + 1G16)	IEC 60228 Class 5 flexible Cu/SnCu	28.6	1,620	5.2	172
(N)TSCGECEWÖU MT P 3×70 + 3G16 mm²	3 × 70 mm² + 3G16 mm²	IEC 60228 Class 5 flexible Cu/SnCu	38.4	3,180	10.5	230

Typical values for this cable type; dimensions and weights for your order are confirmed in the quotation.
Custom core cross-sections, pair/fibre counts, armour grades and factory drum lengths available per DIN VDE 0250-813 / WRAS / ACS.

Electrical, optical & thermal parameters
Configuration	Max. DC R₂₀ / Atten. Ω/km or dB/km	Rating / Impedance	Operating temp.
4G16 mm² (3×16 + 1G16)	1.21	3.6/6 kV (94 A submerged)	−25…+90 °C
4G35 mm² (3×35 + 1G16)	0.55	3.6/6 kV (152 A submerged)	−25…+90 °C
3 × 70 mm² + 3G16 mm²	0.27	3.6/6 kV (235 A submerged)	−25…+90 °C

Every production length undergoes routine conductor DC resistance, high-voltage dielectric or OTDR continuity and dimensional verification.

Quality & approvals

Testing & inspection

Routine tests on every production length, sample and type tests per batch — documented on an EN 10204 3.1 inspection certificate.

ConductorClass 5 stranding
Spark test100 % in-line
Lay-upCores, earth, fillers
SheathingInner, braid / screen, outer
Electrical testsAC voltage, resistance
DimensionsOD, wall thickness
Inspection documents & dispatchDrum & dispatch

Testing & inspection	Test value / reference	Frequency
Routine tests
Conductor resistance, continuity & dimensional verification (DIN VDE 0250-813 / WRAS / ACS)	DC resistance at 20 °C / optical attenuation and outer diameter within DIN VDE 0250-813 / WRAS / ACS tolerances	Every manufactured drum length
High-voltage dielectric & insulation resistance test (DIN VDE 0250-813 / WRAS / ACS)	Zero dielectric breakdown and verified insulation resistance for 3.6/6 kV rating	Every manufactured drum length
Sample tests
Hydrostatic pressure, water-blocking & mechanical endurance qualification (DIN VDE 0250-813 / WRAS / ACS)	Verified submersion integrity, tensile load and thermal stability across −25…+90 °C	Type qualification & periodic lot audit

Inspection certificate

Issued with every drum, listing the routine test results for that length.

Product approvals

VDE 0250-813 CompliantEN 10204 3.1 Factory Test CertificateCE, RoHS 2 (2011/65/EU) & REACH

Company certificates

ISO 9001ISO 14001ISO 45001VDE marks approvalUL / cULCE · LVD / EMC

Marking & supply

Ordering & delivery

Sheath marking

TEBAOFLEX (N)TSCGECEWÖU MT PLUS VDE 0250-813 3.6/6 kV CE

Delivery form: Heavy-duty export fumigated wooden drums or steel subsea reels
Standard lengths: 500 m, 1,000 m or custom continuous subsea/wellbore lengths
MOQ: 100 m (standard configurations) · 500 m (custom builds)
Lead time: 2–5 weeks ex-works
Incoterms: EXW, FCA, FOB, CIF, DAP

Technical documents

Downloads

PDF(N)TSCGECEWÖU MT PLUS 3.6/6–12/20 kV Submersible MV Cable – technical datasheet3 sizes · construction, technical data, approvals XLSX(N)TSCGECEWÖU MT PLUS spec data (Excel)All 3 sizes with dimensions and data, for your BOM or quotation

Revision: 2026-10-25
Updated: 2026-10-25

FAQ

Questions engineers ask first

Not covered here? Send your drawing — an engineer replies within 2 business hours.

What governing standard and construction define (N)TSCGECEWÖU MT PLUS ((N)TSCGECEWÖU MT PLUS 3.6/6–12/20 kV Submersible MV Cable)?

(N)TSCGECEWÖU MT PLUS ((N)TSCGECEWÖU MT PLUS 3.6/6–12/20 kV Submersible MV Cable) is manufactured in accordance with DIN VDE 0250-813 / WRAS / ACS for 3.6/6 kV service over -25 °C to +90 °C. Its 5-layer construction comprises class 5 tinned copper mv conductors, triple-extruded 3gi3 epr mv insulation and 5gm3 cm / blue em6 potable-water sheath.

What is the minimum bending radius and operating temperature range for (N)TSCGECEWÖU MT PLUS?

The minimum bending radius for (N)TSCGECEWÖU MT PLUS is 10 × OD across its continuous operating temperature range of -25 °C to +90 °C, ensuring mechanical and dielectric reliability in subsea, marine and submersible service.

How are the concentric layers of (N)TSCGECEWÖU MT PLUS arranged from inside to outside?

From inside to outside, the construction sequence is: (01) Class 5 Tinned Copper MV Conductors — Flexible stranded tinned copper conductors rated for 3.6/6 kV up to 12/20 kV; (02) Triple-Extruded 3GI3 EPR MV Insulation — Semiconductive conductor screen + 3GI3 EPR dielectric + outer semiconductive screen; (03) Individual Copper Braid Phase Screen (CE) — Each phase core has its own bare copper braid shield (or 3 split earths in MT PLUS); (04) Reinforced Cradle & GM1b Waterproof Inner — Central reinforced rubber cradle + semicon tape + waterproof GM1b EPR inner sheath; (05) 5GM3 CM / Blue EM6 Potable-Water Sheath — Black 5GM3 CM (MV Submersible) or Blue WRAS/ACS EM6 (MT PLUS, 300 m).

What factory test certificates are supplied with (N)TSCGECEWÖU MT PLUS?

Every production drum of (N)TSCGECEWÖU MT PLUS undergoes routine conductor resistance/continuity, high-voltage dielectric and dimensional testing per DIN VDE 0250-813 / WRAS / ACS, and is delivered with an EN 10204 3.1 factory test certificate.

Request a quote

Get an engineering quote for (N)TSCGECEWÖU MT PLUS

Your selection and application details are copied into the enquiry form below.

01Selected sizes

Use + Add next to a size or configuration.

02Reel & motion

Add your operating conditions here to include them in your enquiry.

Reel typeDrum core diameter (mm)Cable length on drum (m)Travel speed (m/min)Max. accelerationCycles per hourLength and quantityAmbient temperatureExposure (outdoor, water, oil, abrasion)Destination countryEquipment and operating conditions

03Message for our engineers

(N)TSCGECEWÖU MT PLUS 3.6/6–12/20 kV Submersible MV Cable

Selected sizes:


Reel & motion:
- Reel type: 
- Drum core diameter (mm): 
- Cable length on drum (m): 
- Travel speed (m/min): 
- Max. acceleration: 
- Cycles per hour: 
- Length and quantity: 
- Ambient temperature: 
- Exposure (outdoor, water, oil, abrasion): 
- Destination country: 
- Equipment and operating conditions:

Send via WhatsApp