1 / 5

Product

AS/NZS 3808 mining shotfiring & detonator cable AS/NZS 38082 × 1.5 mm² V90HTYellow/Blue Striped

90592RGYBEM AS/NZS 3808 Mining Shotfiring Cable90592RGYBEM high-visibility underground mining shotfiring and detonator firing cable to AS/NZS 3808 and AS/NZS 1125, with 2 × 1.5 mm² annealed copper conductors, Red/Green V90HT PVC insulation and yellow/blue-striped V90HT PVC sheath.

Engineered for underground mining, open-cast excavation, shaft infrastructure and heavy industrial service per AS/NZS 3808 / AS/NZS 1125 / AS/NZS 60079 across -15 to +105 °C.

Flame-retardant

Oil-resistant

Outdoor & humid

Approved

Configuration

Order designation: 90592RGYBEM 2×1.5 mm² Standard
Outer Ø ≈: 8.4 mm
Net weight ≈: 92 kg/km
Tensile rating ≈: 0.5 kN
Core / stranding: 7/0.50 mm plain Cu

All sizes (3)

Request a quote Datasheet WhatsApp info@tebaoflex.com

Engineering reply in 2 business hoursCut-to-length export drumsEN 10204 3.1 certificate per drum

Rated voltage: 300/500 V
Operating temp.: -15 to +105 °C
Min. bend radius: 8 × OD
Core / conductor: 2 × 1.5 mm² Cu
Outer protection: V90HT Striped
Standard: AS/NZS 3808

Typical values for this cable type, based on AS/NZS 3808 / AS/NZS 1125 / AS/NZS 60079 — confirmed in the datasheet and quotation for your order.

Application fit

Is 90592RGYBEM right for your machine?

Engineered for underground mining, open-cast excavation, shaft infrastructure and heavy industrial service per AS/NZS 3808 / AS/NZS 1125 / AS/NZS 60079 across -15 to +105 °C.

Mine roadway & tunnel wall hangers

Suitable

Engineered for underground mining shafts, galleries and tunnel infrastructure per AS/NZS 3808 / AS/NZS 1125 / AS/NZS 60079.

Fixed installation

Suitable

Suitable for vertical shaft cleats, gallery messenger hooks and tray routing within 8 × OD.

Free-hanging vertical run

Suitable

Supports inclined roadway and vertical mine shaft suspension within rated kN load across -15 to +105 °C.

Festoon & line chain

Not suitable

Not optimized for high-speed overhead crane C-track festoon loops; select a dedicated festoon cable.

NGFLGÖU Flat Rubber Festoon Cable

Typical machinesMining & TunnellingUnderground Coal & Hard-Rock MiningOpen-Cast Excavators, Draglines & ShovelsVertical Mine Shafts, Hoists & BoreholesTunneling, Mineral Processing & Slurry Plants

Construction

Layer by layer

Shown: 90592RGYBEM (AS/NZS 3808 / AS/NZS 1125 / AS/NZS 60079) featuring stranded conductors (2×1.5 mm²), v90ht pvc core insulation and yellow/blue-striped outer sheath (3-layer construction).

Schematic, not to scale — generated from the layer data

#	Layer	Material & reference
1	Stranded Conductors (2×1.5 mm²)	7/0.50 mm plain annealed copper conductors per AS/NZS 1125 (≤13.6 Ω/km)
2	V90HT PVC Core Insulation	0.7 mm wall Red & Green V90HT PVC primary insulation per AS/NZS 3808
3	Yellow/Blue-Striped Outer Sheath	1.3 mm heavy-duty yellow V90HT PVC sheath with co-extruded blue stripes

90592RGYBEM — Standard Mining Execution

Built to AS/NZS 3808 / AS/NZS 1125 / AS/NZS 60079 with stranded conductors (2×1.5 mm²) and yellow/blue-striped outer sheath

90592RGYBEM — Custom Drum Length & Gland Kit

Available in custom shaft/roadway drum lengths or pre-terminated assemblies

90592RGYBEM — Routine & Flame Test Certified

Supplied with EN 10204 3.1 routine dielectric, resistance & flame test report

Technical data

Ratings & operating limits

Typical values: Typical values for this cable type, based on AS/NZS 3808 / AS/NZS 1125 / AS/NZS 60079. Values for your order are confirmed in the datasheet and quotation.

Electrical

Rated voltage / transmission duty: 300/500 V (AS/NZS 3808 / AS/NZS 1125 / AS/NZS 60079)
Core / conductor construction: Stranded Conductors (2×1.5 mm²) — 7/0.50 mm plain annealed copper conductors per AS/NZS 1125 (≤13.6 Ω/km)
Primary dielectric / buffering: V90HT PVC Core Insulation — 0.7 mm wall Red & Green V90HT PVC primary insulation per AS/NZS 3808

Thermal

Continuous operating temperature: -15 to +105 °C (mining & industrial service)
Short-circuit / peak thermal rating: Verified thermal stability per AS/NZS 3808 / AS/NZS 1125 / AS/NZS 60079
Storage & transport temperature: −40…+80 °C on export wooden/steel drum

Mechanical

Outer protection / armouring: Yellow/Blue-Striped Outer Sheath — 1.3 mm heavy-duty yellow V90HT PVC sheath with co-extruded blue stripes
Minimum bending radius: 8 × OD
Crush, impact & abrasion duty: Heavy-duty mining rock-cut, impact and tensile protection per AS/NZS 3808 / AS/NZS 1125 / AS/NZS 60079

Resistance

Flame retardancy & mine fire safety: Self-extinguishing / flame-retardant mining jacket per AS/NZS 3808 / AS/NZS 1125 / AS/NZS 60079
Mine water, oil & chemical resistance: Resistant to acidic mine water, hydraulic oils and abrasion per AS/NZS 3808 / AS/NZS 1125 / AS/NZS 60079
RoHS & REACH compliance: RoHS 2 (2011/65/EU + 2015/863) & REACH SVHC compliant

Reference standards

Governing standard: AS/NZS 3808 / AS/NZS 1125 / AS/NZS 60079
Flame & environmental test standards: IEC 60332 / MSHA / EN 60794 / IEC 60228
Quality management & inspection: ISO 9001:2015 & EN 10204 3.1 factory routine inspection

Identification

Model designation: 90592RGYBEM
Sheath colour & metre marking: Continuous metre-marked yellow mining outer sheath
Customs tariff (HS): 8544.49 / 8544.60 / 8544.70

Sizes

3 standard 90592RGYBEM mining & industrial configurations

Manufactured to AS/NZS 3808 / AS/NZS 1125 / AS/NZS 60079 for underground mining, open-cast excavation, shaft and heavy industrial systems.

Dimensions, tensile load & weights
Order designation	Configuration	Core / stranding	Outer Ø ≈ mm	Net weight ≈ kg/km	Tensile rating kN ≈	Min. bend R mm
90592RGYBEM Construction Schedule (-15 to +105 °C)
90592RGYBEM 2×1.5 mm² Standard	2 × 1.5 mm² (7/0.50)	7/0.50 mm plain Cu	8.4	92	0.5	68
90592RGYBEM 2×2.5 mm² Heavy Trunk	2 × 2.5 mm² (7/0.67)	7/0.67 mm plain Cu	9.8	135	0.8	78
90592RGYBEM 2×4.0 mm² Main Firing Bus	2 × 4.0 mm² (7/0.85)	7/0.85 mm plain Cu	11.4	195	1.2	92

Typical values for this cable type; dimensions and weights for your order are confirmed in the quotation.
Custom core cross-sections, pair/fibre counts, armour grades and factory drum lengths available per AS/NZS 3808 / AS/NZS 1125 / AS/NZS 60079.

Electrical, optical & thermal parameters
Configuration	Max. DC R₂₀ / Atten. Ω/km or dB/km	Rating / Impedance	Operating temp.
2 × 1.5 mm² (7/0.50)	13.60	27.2 Ω/km loop resistance	-15 to +105 °C
2 × 2.5 mm² (7/0.67)	7.41	14.8 Ω/km loop resistance	-15 to +105 °C
2 × 4.0 mm² (7/0.85)	4.61	9.22 Ω/km loop resistance	-15 to +105 °C

Every production length undergoes routine conductor DC resistance, high-voltage Spark/AC dielectric or OTDR continuity and dimensional verification.

Quality & approvals

Testing & inspection

Routine tests on every production length, sample and type tests per batch — documented on an EN 10204 3.1 inspection certificate.

ConductorClass 5 stranding
Spark test100 % in-line
Lay-upCores, earth, fillers
SheathingInner, braid / screen, outer
Electrical testsAC voltage, resistance
DimensionsOD, wall thickness
Inspection documents & dispatchDrum & dispatch

Testing & inspection	Test value / reference	Frequency
Routine tests
Conductor resistance, continuity & dimensional verification (AS/NZS 3808 / AS/NZS 1125 / AS/NZS 60079)	DC resistance at 20 °C / optical attenuation and outer diameter within AS/NZS 3808 / AS/NZS 1125 / AS/NZS 60079 tolerances	Every manufactured drum length
High-voltage dielectric & insulation resistance test (AS/NZS 3808 / AS/NZS 1125 / AS/NZS 60079)	Zero dielectric breakdown and verified insulation resistance over full production length	Every manufactured drum length
Sample tests
Flame propagation, mechanical crush & thermal ageing qualification (AS/NZS 3808 / AS/NZS 1125 / AS/NZS 60079)	Verified flame retardancy, mechanical integrity and thermal endurance across -15 to +105 °C	Type qualification & periodic lot audit

Inspection certificate

Issued with every drum, listing the routine test results for that length.

Product approvals

AS/NZS 3808 CompliantEN 10204 3.1 Factory Test CertificateCE, RoHS 2 (2011/65/EU) & REACH

Company certificates

ISO 9001ISO 14001ISO 45001VDE marks approvalUL / cULCE · LVD / EMC

Marking & supply

Ordering & delivery

Sheath marking

TEBAOFLEX 90592RGYBEM AS/NZS 3808 300/500 V CE

Delivery form: Heavy-duty export fumigated wooden drums or steel mine reels
Standard lengths: 500 m, 1,000 m or custom continuous shaft/reeling lengths
MOQ: 100 m (standard configurations) · 500 m (custom builds)
Lead time: 2–5 weeks ex-works
Incoterms: EXW, FCA, FOB, CIF, DAP

Technical documents

Downloads

PDF90592RGYBEM AS/NZS 3808 Mining Shotfiring Cable – technical datasheet3 sizes · construction, technical data, approvals XLSX90592RGYBEM spec data (Excel)All 3 sizes with dimensions and data, for your BOM or quotation

Revision: 2026-10-24
Updated: 2026-10-24

FAQ

Questions engineers ask first

Not covered here? Send your drawing — an engineer replies within 2 business hours.

What governing standard and construction define 90592RGYBEM (90592RGYBEM AS/NZS 3808 Mining Shotfiring Cable)?

90592RGYBEM (90592RGYBEM AS/NZS 3808 Mining Shotfiring Cable) is manufactured in accordance with AS/NZS 3808 / AS/NZS 1125 / AS/NZS 60079 for 300/500 V duty over -15 to +105 °C. Its 3-layer construction comprises Stranded Conductors (2×1.5 mm²), V90HT PVC Core Insulation and Yellow/Blue-Striped Outer Sheath.

What is the minimum bending radius and operating temperature range for 90592RGYBEM?

The minimum bending radius for 90592RGYBEM is 8 × OD across its continuous operating temperature range of -15 to +105 °C, ensuring mechanical and dielectric reliability in mining and heavy industrial service.

How are the concentric layers of 90592RGYBEM arranged from inside to outside?

From inside to outside, the construction sequence is: (01) Stranded Conductors (2×1.5 mm²) (7/0.50 mm plain annealed copper conductors per AS/NZS 1125 (≤13.6 Ω/km)); (02) V90HT PVC Core Insulation (0.7 mm wall Red & Green V90HT PVC primary insulation per AS/NZS 3808); (03) Yellow/Blue-Striped Outer Sheath (1.3 mm heavy-duty yellow V90HT PVC sheath with co-extruded blue stripes).

What factory test certificates are supplied with 90592RGYBEM?

Every production drum of 90592RGYBEM undergoes routine conductor resistance/continuity, high-voltage dielectric and dimensional testing per AS/NZS 3808 / AS/NZS 1125 / AS/NZS 60079, and is delivered with an EN 10204 3.1 factory test certificate.

Request a quote

Get an engineering quote for 90592RGYBEM

Your selection and application details are copied into the enquiry form below.

01Selected sizes

Use + Add next to a size or configuration.

02Reel & motion

Add your operating conditions here to include them in your enquiry.

Reel typeDrum core diameter (mm)Cable length on drum (m)Travel speed (m/min)Max. accelerationCycles per hourLength and quantityAmbient temperatureExposure (outdoor, water, oil, abrasion)Destination countryEquipment and operating conditions

03Message for our engineers

90592RGYBEM AS/NZS 3808 Mining Shotfiring Cable

Selected sizes:


Reel & motion:
- Reel type: 
- Drum core diameter (mm): 
- Cable length on drum (m): 
- Travel speed (m/min): 
- Max. acceleration: 
- Cycles per hour: 
- Length and quantity: 
- Ambient temperature: 
- Exposure (outdoor, water, oil, abrasion): 
- Destination country: 
- Equipment and operating conditions:

Send via WhatsApp