1 / 5

Product

CSA C22.2 No. 131 self-supporting vertical mineshaft SIA cable CSA C22.2 No. 1315 kV RW90 XLPERibbed Anti-Slip SIA

Vertical Mineshaft SIA 5 kV Self-Supporting Borehole CableVertical Mineshaft SIA 5 kV self-supporting borehole and vertical mine shaft feeder cable per CSA C22.2 No. 131 and UL 1569, combining copper-tape-shielded RW90 XLPE phases, internal steel support messengers, galvanized SIA armour and FT4 jacket.

Engineered for underground mining, open-cast excavation, shaft infrastructure and heavy industrial service per CSA C22.2 No. 131 / CSA C68.10 / UL 1569 across -40 to +90 °C.

EMC screen

Flame-retardant

Oil-resistant

Outdoor & humid

Configuration

Order designation: Vertical Mineshaft SIA 5 kV 3×2/0 AWG
Outer Ø ≈: 56.4 mm
Net weight ≈: 5,420 kg/km
Tensile rating ≈: 85.0 kN
Core / stranding: Class B Cu + Galvanized Steel

All sizes (3)

Request a quote Datasheet WhatsApp info@tebaoflex.com

Engineering reply in 2 business hoursCut-to-length export drumsEN 10204 3.1 certificate per drum

Rated voltage: 5 kV
Operating temp.: -40 to +90 °C
Min. bend radius: 12 × OD
Core / conductor: 3×2 AWG–500 MCM
Outer protection: SIA + FT4 Orange
Standard: CSA C22.2 #131

Typical values for this cable type, based on CSA C22.2 No. 131 / CSA C68.10 / UL 1569 — confirmed in the datasheet and quotation for your order.

Application fit

Is Vertical Mineshaft SIA right for your machine?

Engineered for underground mining, open-cast excavation, shaft infrastructure and heavy industrial service per CSA C22.2 No. 131 / CSA C68.10 / UL 1569 across -40 to +90 °C.

Mine roadway & tunnel wall hangers

Suitable

Engineered for underground mining shafts, galleries and tunnel infrastructure per CSA C22.2 No. 131 / CSA C68.10 / UL 1569.

Fixed installation

Suitable

Suitable for vertical shaft cleats, gallery messenger hooks and tray routing within 12 × OD.

Free-hanging vertical run

Suitable

Supports inclined roadway and vertical mine shaft suspension within rated kN load across -40 to +90 °C.

Festoon & line chain

Not suitable

Not optimized for high-speed overhead crane C-track festoon loops; select a dedicated festoon cable.

NGFLGÖU Flat Rubber Festoon Cable

Typical machinesMining & TunnellingUnderground Coal & Hard-Rock MiningOpen-Cast Excavators, Draglines & ShovelsVertical Mine Shafts, Hoists & BoreholesTunneling, Mineral Processing & Slurry Plants

Construction

Layer by layer

Shown: Vertical Mineshaft SIA (CSA C22.2 No. 131 / CSA C68.10 / UL 1569) featuring 5 kv phase conductors (3×2/0 awg), internal steel support messengers and ft4 low-temp outer jacket (5-layer construction).

Schematic, not to scale — generated from the layer data

#	Layer	Material & reference
1	5 kV Phase Conductors (3×2/0 AWG)	Stranded bare copper + semicon screens + 90 °C RW90 XLPE + copper tape shield
2	Internal Steel Support Messengers	Individually PVC-jacketed high-tensile galvanized steel support cables
3	Ribbed Anti-Slip Inner Jacket	Extruded FR-PVC inner jacket with longitudinal ribs locking core assembly
4	Steel Interlocked Armour (SIA)	Galvanized steel interlocked armour mechanically engaged with inner ribs
5	FT4 Low-Temp Outer Jacket	Sunlight-, oil- and -40 °C cold-impact resistant FT4 FR-PVC jacket

Vertical Mineshaft SIA — Standard Mining Execution

Built to CSA C22.2 No. 131 / CSA C68.10 / UL 1569 with 5 kv phase conductors (3×2/0 awg) and ft4 low-temp outer jacket

Vertical Mineshaft SIA — Custom Drum Length & Gland Kit

Available in custom shaft/roadway drum lengths or pre-terminated assemblies

Vertical Mineshaft SIA — Routine & Flame Test Certified

Supplied with EN 10204 3.1 routine dielectric, resistance & flame test report

Technical data

Ratings & operating limits

Typical values: Typical values for this cable type, based on CSA C22.2 No. 131 / CSA C68.10 / UL 1569. Values for your order are confirmed in the datasheet and quotation.

Electrical

Rated voltage / transmission duty: 5 kV (CSA C22.2 No. 131 / CSA C68.10 / UL 1569)
Core / conductor construction: 5 kV Phase Conductors (3×2/0 AWG) — Stranded bare copper + semicon screens + 90 °C RW90 XLPE + copper tape shield
Primary dielectric / buffering: Internal Steel Support Messengers — Individually PVC-jacketed high-tensile galvanized steel support cables

Thermal

Continuous operating temperature: -40 to +90 °C (mining & industrial service)
Short-circuit / peak thermal rating: Verified thermal stability per CSA C22.2 No. 131 / CSA C68.10 / UL 1569
Storage & transport temperature: −40…+80 °C on export wooden/steel drum

Mechanical

Outer protection / armouring: FT4 Low-Temp Outer Jacket — Sunlight-, oil- and -40 °C cold-impact resistant FT4 FR-PVC jacket
Minimum bending radius: 12 × OD
Crush, impact & abrasion duty: Heavy-duty mining rock-cut, impact and tensile protection per CSA C22.2 No. 131 / CSA C68.10 / UL 1569

Resistance

Flame retardancy & mine fire safety: Self-extinguishing / flame-retardant mining jacket per CSA C22.2 No. 131 / CSA C68.10 / UL 1569
Mine water, oil & chemical resistance: Resistant to acidic mine water, hydraulic oils and abrasion per CSA C22.2 No. 131 / CSA C68.10 / UL 1569
RoHS & REACH compliance: RoHS 2 (2011/65/EU + 2015/863) & REACH SVHC compliant

Reference standards

Governing standard: CSA C22.2 No. 131 / CSA C68.10 / UL 1569
Flame & environmental test standards: IEC 60332 / MSHA / EN 60794 / IEC 60228
Quality management & inspection: ISO 9001:2015 & EN 10204 3.1 factory routine inspection

Identification

Model designation: Vertical Mineshaft SIA
Sheath colour & metre marking: Continuous metre-marked orange mining outer sheath
Customs tariff (HS): 8544.49 / 8544.60 / 8544.70

Sizes

3 standard Vertical Mineshaft SIA mining & industrial configurations

Manufactured to CSA C22.2 No. 131 / CSA C68.10 / UL 1569 for underground mining, open-cast excavation, shaft and heavy industrial systems.

Dimensions, tensile load & weights
Order designation	Configuration	Core / stranding	Outer Ø ≈ mm	Net weight ≈ kg/km	Tensile rating kN ≈	Min. bend R mm
Vertical Mineshaft SIA Construction Schedule (-40 to +90 °C)
Vertical Mineshaft SIA 5 kV 3×2/0 AWG	3 × 2/0 AWG + 3 Steel Messengers	Class B Cu + Galvanized Steel	56.4	5,420	85.0	675
Vertical Mineshaft SIA 5 kV 3×4/0 AWG	3 × 4/0 AWG + 3 Steel Messengers	Class B Cu + Galvanized Steel	63.8	7,180	115.0	765
Vertical Mineshaft SIA 5 kV 3×350 kcmil	3 × 350 kcmil + 3 Steel Messengers	Class B Cu + Galvanized Steel	74.2	10,450	160.0	890

Typical values for this cable type; dimensions and weights for your order are confirmed in the quotation.
Custom core cross-sections, pair/fibre counts, armour grades and factory drum lengths available per CSA C22.2 No. 131 / CSA C68.10 / UL 1569.

Electrical, optical & thermal parameters
Configuration	Max. DC R₂₀ / Atten. Ω/km or dB/km	Rating / Impedance	Operating temp.
3 × 2/0 AWG + 3 Steel Messengers	0.26	5 kV 100%/133% (215 A)	-40 to +90 °C
3 × 4/0 AWG + 3 Steel Messengers	0.16	5 kV 100%/133% (285 A)	-40 to +90 °C
3 × 350 kcmil + 3 Steel Messengers	0.10	5 kV 100%/133% (395 A)	-40 to +90 °C

Every production length undergoes routine conductor DC resistance, high-voltage Spark/AC dielectric or OTDR continuity and dimensional verification.

Quality & approvals

Testing & inspection

Routine tests on every production length, sample and type tests per batch — documented on an EN 10204 3.1 inspection certificate.

ConductorClass 5 stranding
Spark test100 % in-line
Lay-upCores, earth, fillers
SheathingInner, braid / screen, outer
Electrical testsAC voltage, resistance
DimensionsOD, wall thickness
Inspection documents & dispatchDrum & dispatch

Testing & inspection	Test value / reference	Frequency
Routine tests
Conductor resistance, continuity & dimensional verification (CSA C22.2 No. 131 / CSA C68.10 / UL 1569)	DC resistance at 20 °C / optical attenuation and outer diameter within CSA C22.2 No. 131 / CSA C68.10 / UL 1569 tolerances	Every manufactured drum length
High-voltage dielectric & insulation resistance test (CSA C22.2 No. 131 / CSA C68.10 / UL 1569)	Zero dielectric breakdown and verified insulation resistance over full production length	Every manufactured drum length
Sample tests
Flame propagation, mechanical crush & thermal ageing qualification (CSA C22.2 No. 131 / CSA C68.10 / UL 1569)	Verified flame retardancy, mechanical integrity and thermal endurance across -40 to +90 °C	Type qualification & periodic lot audit

Inspection certificate

Issued with every drum, listing the routine test results for that length.

Product approvals

CSA C22.2 #131 CompliantEN 10204 3.1 Factory Test CertificateCE, RoHS 2 (2011/65/EU) & REACH

Company certificates

ISO 9001ISO 14001ISO 45001VDE marks approvalUL / cULCE · LVD / EMC

Marking & supply

Ordering & delivery

Sheath marking

TEBAOFLEX Vertical Mineshaft SIA CSA C22.2 #131 5 kV CE

Delivery form: Heavy-duty export fumigated wooden drums or steel mine reels
Standard lengths: 500 m, 1,000 m or custom continuous shaft/reeling lengths
MOQ: 100 m (standard configurations) · 500 m (custom builds)
Lead time: 2–5 weeks ex-works
Incoterms: EXW, FCA, FOB, CIF, DAP

Technical documents

Downloads

PDFVertical Mineshaft SIA 5 kV Self-Supporting Borehole Cable – technical datasheet3 sizes · construction, technical data, approvals XLSXVertical Mineshaft SIA spec data (Excel)All 3 sizes with dimensions and data, for your BOM or quotation

Revision: 2026-10-24
Updated: 2026-10-24

FAQ

Questions engineers ask first

Not covered here? Send your drawing — an engineer replies within 2 business hours.

What governing standard and construction define Vertical Mineshaft SIA (Vertical Mineshaft SIA 5 kV Self-Supporting Borehole Cable)?

Vertical Mineshaft SIA (Vertical Mineshaft SIA 5 kV Self-Supporting Borehole Cable) is manufactured in accordance with CSA C22.2 No. 131 / CSA C68.10 / UL 1569 for 5 kV duty over -40 to +90 °C. Its 5-layer construction comprises 5 kV Phase Conductors (3×2/0 AWG), Internal Steel Support Messengers and FT4 Low-Temp Outer Jacket.

What is the minimum bending radius and operating temperature range for Vertical Mineshaft SIA?

The minimum bending radius for Vertical Mineshaft SIA is 12 × OD across its continuous operating temperature range of -40 to +90 °C, ensuring mechanical and dielectric reliability in mining and heavy industrial service.

How are the concentric layers of Vertical Mineshaft SIA arranged from inside to outside?

From inside to outside, the construction sequence is: (01) 5 kV Phase Conductors (3×2/0 AWG) (Stranded bare copper + semicon screens + 90 °C RW90 XLPE + copper tape shield); (02) Internal Steel Support Messengers (Individually PVC-jacketed high-tensile galvanized steel support cables); (03) Ribbed Anti-Slip Inner Jacket (Extruded FR-PVC inner jacket with longitudinal ribs locking core assembly); (04) Steel Interlocked Armour (SIA) (Galvanized steel interlocked armour mechanically engaged with inner ribs); (05) FT4 Low-Temp Outer Jacket (Sunlight-, oil- and -40 °C cold-impact resistant FT4 FR-PVC jacket).

What factory test certificates are supplied with Vertical Mineshaft SIA?

Every production drum of Vertical Mineshaft SIA undergoes routine conductor resistance/continuity, high-voltage dielectric and dimensional testing per CSA C22.2 No. 131 / CSA C68.10 / UL 1569, and is delivered with an EN 10204 3.1 factory test certificate.

Request a quote

Get an engineering quote for Vertical Mineshaft SIA

Your selection and application details are copied into the enquiry form below.

01Selected sizes

Use + Add next to a size or configuration.

02Reel & motion

Add your operating conditions here to include them in your enquiry.

Reel typeDrum core diameter (mm)Cable length on drum (m)Travel speed (m/min)Max. accelerationCycles per hourLength and quantityAmbient temperatureExposure (outdoor, water, oil, abrasion)Destination countryEquipment and operating conditions

03Message for our engineers

Vertical Mineshaft SIA 5 kV Self-Supporting Borehole Cable

Selected sizes:


Reel & motion:
- Reel type: 
- Drum core diameter (mm): 
- Cable length on drum (m): 
- Travel speed (m/min): 
- Max. acceleration: 
- Cycles per hour: 
- Length and quantity: 
- Ambient temperature: 
- Exposure (outdoor, water, oil, abrasion): 
- Destination country: 
- Equipment and operating conditions:

Send via WhatsApp