1 / 5

Product

subsea umbilical, ROV tether & oceanographic tow cable Type 300 / 302 Subsea Sensor300 V – 600 V (-30 to +80 °C)Black Marine Polyurethane (PUR) Jack

Type 300 / 302 300–600 V CTD, ADCP & Tide Gauge Subsea Power & Screened Sensor CableType 300 / 302 Subsea Sensor — 300 V – 600 V — -30 to +80 °C Subsea & Offshore Cable

Type 300 / 302 300–600 V CTD, ADCP & Tide Gauge Subsea Power & Screened Sensor Cable (Type 300 / 302 Subsea Sensor) engineered for 300 V – 600 V service across -30 to +80 °C (min. bend radius 8 × OD).

Water-resistant

EMC screen

Oil-resistant

Approved

Configuration

Order designation: Type 300 4Pr / 8Ch
Outer Ø ≈: 11.2 mm
Net weight ≈: 175 kg/km
Tensile rating ≈: 12.5 kN
Core / stranding: Stranded SnCu + Foil/Braid + Aramid

All sizes (3)

Request a quote Datasheet WhatsApp info@tebaoflex.com

Engineering reply in 2 business hoursCut-to-length export drumsEN 10204 3.1 certificate per drum

Rated voltage: 300 V – 600 V
Operating temp.: −30…+80 °C
Min. bend radius: 8 × OD
Core / conductor: Tinned Copper Po
Outer protection: Black Marine Pol
Standard: Type 300 / 302 S

Typical values for this cable type, based on Type 300 / 302 Subsea Power (4×1.5 mm²) + Screened Pairs (4×2×0.34 mm²) PUR Specification — confirmed in the datasheet and quotation for your order.

Application fit

Is Type 300 / 302 right for your machine?

Immersion & wet locations

Suitable

Hydrolysis-resistant polyurethane (PUR) or HDPE jacket and water-blocked core withstand continuous deepwater hydrostatic immersion.

Vertical / spreader reel

Suitable

Torque-balanced contra-helical steel wire armour or high-modulus aramid strength member supports dynamic winch deployment without hockling

Trailing & towing

Suitable

Abrasion-resistant outer sheath and high working-load strength elements handle dynamic marine towing, buoy mooring and ROV excursion.

Offshore platform & shipboard deck trays

Suitable

UV-stabilised, oil- and seawater-resistant construction withstands A-frame sheaves, traction winches and open research-vessel decks.

Energy chain / drag chain

Not suitable

Subsea umbilical, ROV tether and towed array cables are not designed for indoor factory automation drag chains.

Use M23 Servo Assembly

Typical machinesUnderwater & Ocean ExplorationOceanographic CTD, ADCP & Deep-Tow SurveysWork-Class & Observation ROV / AUV SystemsSide-Scan Sonar, SAS & Towed Hydrophone ArraysMarine 2D/3D/UHR Seismic Streamers & OBC

Construction

Layer by layer

Shown: Type 300 / 302 (Type 300 / 302 Subsea Power (4×1.5 mm²) + Screened Pairs (4×2×0.34 mm²) PUR Specification) featuring tinned copper power cores (0.5–2.5 mm²), foil-screened signal pairs (0.22-0.5 mm²) and black marine polyurethane (pur) jacket (4-layer construction).

Schematic, not to scale — generated from the layer data

#	Layer	Material & reference
1	Tinned Copper Power Cores (0.5–2.5 mm²)	300V-—600V PE/XLPE insulated tinned copper power conductors
2	Foil-Screened Signal Pairs (0.22-0.5 mm²	Twisted pairs with individual & collective AVPET foil shields
3	Aramid Braided Strength Member	Optional braided aramid reinforcement for instrument suspension
4	Black Marine Polyurethane (PUR) Jacket	Seawater- and abrasion-resistant black PUR outer sheath

Type 300 / 302 — Standard Subsea & Offshore Execution

Built to Type 300 / 302 Subsea Power (4×1.5 mm²) + Screened Pairs (4×2×0.34 mm²) PUR Specification with tinned copper power cores (0.5–2.5 mm²) and black marine polyurethane (pur) jacket

Type 300 / 302 — Custom Continuous Winch / Reel Length

Available in custom continuous subsea winch, tow or seabed lengths with water-blocked terminations

Type 300 / 302 — Hydrostatic, Tensile & Routine Certified

Supplied with EN 10204 3.1 routine dielectric, optical OTDR / DC resistance & tensile test report

Technical data

Ratings & operating limits

Typical values: Typical values for this cable type, based on Type 300 / 302 Subsea Power (4×1.5 mm²) + Screened Pairs (4×2×0.34 mm²) PUR Specification. Values for your order are confirmed in the datasheet and quotation.

Electrical

Rated voltage / transmission duty: 300 V – 600 V (Type 300 / 302 Subsea Power (4×1.5 mm²) + Screened Pairs (4×2×0.34 mm²) PUR Specification)
Core / conductor construction: Tinned Copper Power Cores (0.5–2.5 mm²) — 300V-—600V PE/XLPE insulated tinned copper power conductors
Primary dielectric / buffering: Foil-Screened Signal Pairs (0.22-0.5 mm²) — Twisted pairs with individual & collective AVPET foil shields

Thermal

Continuous operating temperature: −30…+80 °C (subsea & offshore duty)
Hydrostatic & thermal stability: Verified thermal and hydrostatic stability per Type 300 / 302 Subsea Power (4×1.5 mm²) + Screened Pairs (4×2×0.34 mm²) PUR Specification
Storage & transport temperature: −40…+80 °C on export wooden/steel winch reel

Mechanical

Outer protection / armouring: Black Marine Polyurethane (PUR) Jacket — Seawater- and abrasion-resistant black PUR outer sheath
Minimum bending radius: 8 × OD
Armour, strength member & mechanical duty: Aramid Braided Strength Member — Optional braided aramid reinforcement for instrument suspension

Resistance

Seawater, hydrostatic & hydrolysis resistance: Engineered for continuous seawater immersion, pressure cycling and hydrolysis resistance per Type 300 / 302 Subsea Power (4×1.5 mm²) + Screened Pairs (4×2×0.34 mm²) PUR Specification
Oil, drilling mud & abrasion resistance: Resistant to marine hydraulic oils, salt mist, winch sheave wear and seabed abrasion per Type 300 / 302 Subsea Power (4×1.5 mm²) + Screened Pairs (4×2×0.34 mm²) PUR Specification
RoHS & REACH compliance: RoHS 2 (2011/65/EU + 2015/863) & REACH SVHC compliant

Reference standards

Governing standard: Type 300 / 302 Subsea Power (4×1.5 mm²) + Screened Pairs (4×2×0.34 mm²) PUR Specification
Environmental & test standards: IEC 60228 / IEC 60794 / ITU-T G.972 / IEEE 1580 / EN 10204
Quality management & inspection: ISO 9001:2015 & EN 10204 3.1 factory routine inspection

Identification

Model designation: Type 300 / 302
Sheath colour & metre marking: Continuous metre-marked black outer finish (Black Marine Pol)
Customs tariff (HS): 8544.49 / 8544.60 / 8544.70

Sizes

3 standard Type 300 / 302 subsea & offshore configurations

Manufactured to Type 300 / 302 Subsea Power (4×1.5 mm²) + Screened Pairs (4×2×0.34 mm²) PUR Specification for subsea, oceanographic, ROV, seismic and offshore applications.

Dimensions, tensile load & weights
Order designation	Configuration	Core / stranding	Outer Ø ≈ mm	Net weight ≈ kg/km	Breaking / tensile kN ≈	Min. bend R mm
Type 300 / 302 Construction Schedule (−30…+80 °C)
Type 300 4Pr / 8Ch	4×2×24–20 AWG (or 8-Ch Array)	Stranded SnCu + Foil/Braid + Aramid	11.2	175	12.5	90
Type 300 8Pr / 16Ch	8×2×22–18 AWG (or 16-Ch Array)	Stranded SnCu + Foil/Braid + Aramid	16.4	340	24.0	130
Type 300 16Pr / 24Ch	16×2×18–16 AWG (or 24-Ch Array)	Stranded SnCu + Foil/Braid + Aramid	24.8	690	35.0	195

Typical values for this cable type; dimensions and weights for your order are confirmed in the quotation.
Custom core cross-sections, pair/fibre counts, armour breaking loads and continuous winch/seabed lengths available per Type 300 / 302 Subsea Power (4×1.5 mm²) + Screened Pairs (4×2×0.34 mm²) PUR Specification.

Electrical, optical & thermal parameters
Configuration	Max. DC R₂₀ / Atten. Ω/km or dB/km	Rating / Impedance	Operating temp.
4×2×24–20 AWG (or 8-Ch Array)	42.00	300 V – 600 V (≤55 nF/km)	−30…+80 °C
8×2×22–18 AWG (or 16-Ch Array)	26.00	300 V – 600 V (≤60 nF/km)	−30…+80 °C
16×2×18–16 AWG (or 24-Ch Array)	15.20	300 V – 600 V (≤65 nF/km)	−30…+80 °C

Every production length undergoes routine conductor DC resistance, high-voltage dielectric or OTDR continuity and dimensional verification.

Quality & approvals

Testing & inspection

Routine tests on every production length, sample and type tests per batch — documented on an EN 10204 3.1 inspection certificate.

ConductorClass 5 stranding
Spark test100 % in-line
Lay-upCores, earth, fillers
SheathingInner, braid / screen, outer
Electrical testsAC voltage, resistance
DimensionsOD, wall thickness
Inspection documents & dispatchDrum & dispatch

Testing & inspection	Test value / reference	Frequency
Routine tests
Conductor resistance, optical OTDR continuity & dimensional verification (Type 300 / 302 Subsea Power (4×1.5 mm²) + Screened Pairs (4×2×0.34 mm²) PUR Specification)	DC resistance at 20 °C / optical attenuation and outer diameter within Type 300 / 302 Subsea Power (4×1.5 mm²) + Screened Pairs (4×2×0.34 mm²) PUR Specification tolerances	Every manufactured drum length
High-voltage dielectric & insulation resistance test (Type 300 / 302 Subsea Power (4×1.5 mm²) + Screened Pairs (4×2×0.34 mm²) PUR Specification)	Zero dielectric breakdown and verified insulation resistance for 300 V – 600 V rating	Every manufactured drum length
Sample tests
Hydrostatic pressure, tensile breaking load & water-blocking qualification (Type 300 / 302 Subsea Power (4×1.5 mm²) + Screened Pairs (4×2×0.34 mm²) PUR Specification)	Verified subsea pressure integrity, torque-balanced tensile performance and thermal stability across −30…+80 °C	Type qualification & periodic lot audit

Inspection certificate

Issued with every drum, listing the routine test results for that length.

Product approvals

Type 300 / 302 Subsea Sensor CompliantEN 10204 3.1 Factory Test CertificateCE, RoHS 2 (2011/65/EU) & REACH

Company certificates

ISO 9001ISO 14001ISO 45001VDE marks approvalUL / cULCE · LVD / EMC

Marking & supply

Ordering & delivery

Sheath marking

TEBAOFLEX Type 300 / 302 Type 300 / 302 Subsea Sensor 300 V – 600 V CE

Delivery form: Heavy-duty export fumigated wooden drums, steel oceanographic winch reels or submarine turntables
Standard lengths: 500 m, 1,000 m, 3,000 m, 6,000 m or custom continuous subsea lengths
MOQ: 100 m (standard configurations) · 500 m (custom subsea builds)
Lead time: 2–6 weeks ex-works
Incoterms: EXW, FCA, FOB, CIF, DAP

Technical documents

Downloads

PDFType 300 / 302 300–600 V CTD, ADCP & Tide Gauge Subsea Power & Screene – technical datasheet3 sizes · construction, technical data, approvals XLSXType 300 / 302 spec data (Excel)All 3 sizes with dimensions and data, for your BOM or quotation

Revision: 2026-10-26
Updated: 2026-10-26

FAQ

Questions engineers ask first

Not covered here? Send your drawing — an engineer replies within 2 business hours.

What governing standard and construction define Type 300 / 302 (Type 300 / 302 300–600 V CTD, ADCP & Tide Gauge Subsea Power & Screened Sensor Cable)?

Type 300 / 302 (Type 300 / 302 300–600 V CTD, ADCP & Tide Gauge Subsea Power & Screened Sensor Cable) is manufactured in accordance with Type 300 / 302 Subsea Power (4×1.5 mm²) + Screened Pairs (4×2×0.34 mm²) PUR Specification for 300 V – 600 V service over -30 to +80 °C. Its 4-layer construction comprises tinned copper power cores (0.5–2.5 mm²), foil-screened signal pairs (0.22-0.5 mm²) and black marine polyurethane (pur) jacket.

What is the minimum bending radius and operating temperature range for Type 300 / 302?

The minimum bending radius for Type 300 / 302 is 8 × OD across its continuous operating temperature range of -30 to +80 °C, ensuring mechanical, hydrostatic and dielectric reliability in subsea and offshore service.

How are the concentric layers of Type 300 / 302 arranged from inside to outside?

From inside to outside, the construction sequence is: (01) Tinned Copper Power Cores (0.5–2.5 mm²) — 300V-—600V PE/XLPE insulated tinned copper power conductors; (02) Foil-Screened Signal Pairs (0.22-0.5 mm²) — Twisted pairs with individual & collective AVPET foil shields; (03) Aramid Braided Strength Member — Optional braided aramid reinforcement for instrument suspension; (04) Black Marine Polyurethane (PUR) Jacket — Seawater- and abrasion-resistant black PUR outer sheath.

What factory test certificates are supplied with Type 300 / 302?

Every production drum of Type 300 / 302 undergoes routine conductor resistance/OTDR continuity, high-voltage dielectric and dimensional testing per Type 300 / 302 Subsea Power (4×1.5 mm²) + Screened Pairs (4×2×0.34 mm²) PUR Specification, and is delivered with an EN 10204 3.1 factory test certificate.

Request a quote

Get an engineering quote for Type 300 / 302

Your selection and application details are copied into the enquiry form below.

01Selected sizes

Use + Add next to a size or configuration.

02Reel & motion

Add your operating conditions here to include them in your enquiry.

Reel typeDrum core diameter (mm)Cable length on drum (m)Travel speed (m/min)Max. accelerationCycles per hourLength and quantityAmbient temperatureExposure (outdoor, water, oil, abrasion)Destination countryEquipment and operating conditions

03Message for our engineers

Type 300 / 302 300–600 V CTD, ADCP & Tide Gauge Subsea Power & Screened Sensor Cable

Selected sizes:


Reel & motion:
- Reel type: 
- Drum core diameter (mm): 
- Cable length on drum (m): 
- Travel speed (m/min): 
- Max. acceleration: 
- Cycles per hour: 
- Length and quantity: 
- Ambient temperature: 
- Exposure (outdoor, water, oil, abrasion): 
- Destination country: 
- Equipment and operating conditions:

Send via WhatsApp