1 / 5

Product

2,000 m halogen-free & 500 m EMC screened VFD submersible cable 0.6/1 kV (3.0 kV Test)2,000 m HF / 500 m EMCAnti-Bubble Inner Sheath

S1BZ-F (2,000m HF) & VSCCB (500m EMC Screened) 0.6/1 kV Pump CableVDE 0282 / EMC VFD · 0.6/1 kV · 2,000 m halogen-free & 500 m emc screened vfd

S1BZ-F 0.6/1 kV (0.6/1 kV 2,000m HEPR/EPDM/EVA Halogen-Free Oil-Resistant Pump Cable) & VSCCB 0.6/1 kV (EMC Screened 500m Screened EPR VFD Wastewater Cable) (VDE 0282 / EMC VFD, 0.6/1 kV, -25 °C to +90 °C, min. bend radius 6 × OD).

Water-resistant

EMC screen

Low-EMC design

Oil-resistant

Configuration

Order designation: S1BZ-F 4G16 mm²
Outer Ø ≈: 21.8 mm
Net weight ≈: 840 kg/km
Tensile rating ≈: 2.4 kN
Core / stranding: IEC 60228 Class 5 flexible Cu/SnCu

All sizes (3)

Request a quote Datasheet WhatsApp info@tebaoflex.com

Engineering reply in 2 business hoursCut-to-length export drumsEN 10204 3.1 certificate per drum

Rated voltage: 0.6/1 kV
Operating temp.: −25…+90 °C
Min. bend radius: 6 × OD
Core / conductor: 3–4G 1.5–240 mm²
Outer protection: HF EVA/SnCu+EPR
Standard: VDE 0282/EMC VFD

Typical values for this cable type, based on DIN VDE 0282 / IEC 60811-404 2,000m HF & EMC Pump Cable — confirmed in the datasheet and quotation for your order.

Application fit

Is S1BZ-F & VSCCB right for your machine?

Immersion & wet locations

Suitable

Cross-linked submersible elastomer compound is qualified for continuous deep-well, potable-water or sewage immersion.

Free-hanging vertical run

Suitable

High-modulus conductor and elastomer construction supports vertical suspension in deep boreholes and pump risers.

Trailing & towing

Suitable

Tear- and abrasion-resistant rubber outer sheath handles mobile dewatering, dredger and portable pump deployment.

Fixed installation

Suitable

Suitable for permanent wet-well, treatment tank, geothermal borehole and submergedmanifold installations.

Energy chain / drag chain

Not suitable

Submersible rubber pump cable is not intended for high-acceleration automation drag chains.

Use Drag-Chain Control Cable

Typical machinesMaterial Handling & Port Crane Equipment CableDeep-Well Potable Water PumpingMunicipal Sewage & Wastewater PlantsMine Dewatering & Slurry DredgingGeothermal, Spa & Pool Installations

Construction

Layer by layer

Shown: S1BZ-F & VSCCB (DIN VDE 0282 / IEC 60811-404 2,000m HF & EMC Pump Cable) featuring class 5 copper conductors (up to 240 mm²), 0.6/1 kv hepr / epr core insulation and tinned copper braid & oil-resistant sheath (4-layer construction).

Schematic, not to scale — generated from the layer data

#	Layer	Material & reference
1	Class 5 Copper Conductors (Up to 240 mm²)	Finely stranded plain copper (S1BZ-F) or tinned copper ≤6 mm² (VSCCB EMC Screened)
2	0.6/1 kV HEPR / EPR Core Insulation	Reduced-wall HEPR (S1BZ-F 0.6/1 kV) or EPR (VSCCB EMC Screened) rated +90 °C
3	Waterproof Anti-Bubble Inner Sheath	Special EPDM / EPR inner sheath preventing osmotic water-bubble formation under pressure
4	Tinned Copper Braid & Oil-Resistant Sheath	Tinned Cu braid (VSCCB) + halogen-free oil-resistant EVA (2,000 m) or EPR (500 m) jacket

S1BZ-F & VSCCB — Standard Subsea & Marine Execution

Built to DIN VDE 0282 / IEC 60811-404 2,000m HF & EMC Pump Cable with class 5 copper conductors (up to 240 mm²) and tinned copper braid & oil-resistant sheath

S1BZ-F & VSCCB — Custom Drum Length & Termination Kit

Available in custom continuous subsea/wellbore drum lengths or pre-terminated assemblies

S1BZ-F & VSCCB — Routine & Hydrostatic Test Certified

Supplied with EN 10204 3.1 routine dielectric, resistance & pressure/dimensional report

Technical data

Ratings & operating limits

Typical values: Typical values for this cable type, based on DIN VDE 0282 / IEC 60811-404 2,000m HF & EMC Pump Cable. Values for your order are confirmed in the datasheet and quotation.

Electrical

Rated voltage / transmission duty: 0.6/1 kV (DIN VDE 0282 / IEC 60811-404 2,000m HF & EMC Pump Cable)
Core / conductor construction: Class 5 Copper Conductors (Up to 240 mm²) — Finely stranded plain copper (S1BZ-F) or tinned copper ≤6 mm² (VSCCB EMC Screened)
Primary dielectric / buffering: 0.6/1 kV HEPR / EPR Core Insulation — Reduced-wall HEPR (S1BZ-F 0.6/1 kV) or EPR (VSCCB EMC Screened) rated +90 °C

Thermal

Continuous operating temperature: −25…+90 °C (subsea, marine & submersible duty)
Short-circuit / peak thermal rating: Verified thermal stability per DIN VDE 0282 / IEC 60811-404 2,000m HF & EMC Pump Cable
Storage & transport temperature: −40…+80 °C on export wooden/steel drum

Mechanical

Outer protection / armouring: Tinned Copper Braid & Oil-Resistant Sheath — Tinned Cu braid (VSCCB) + halogen-free oil-resistant EVA (2,000 m) or EPR (500 m) jacket
Minimum bending radius: 6 × OD
Hydrostatic, tensile & crush duty: Waterproof Anti-Bubble Inner Sheath — Special EPDM / EPR inner sheath preventing osmotic water-bubble formation under pressure

Resistance

Hydrostatic pressure & water blocking: Engineered for continuous submersion and hydrostatic integrity per DIN VDE 0282 / IEC 60811-404 2,000m HF & EMC Pump Cable
Seawater, oil & chemical resistance: Resistant to seawater hydrolysis, hydraulic oils and abrasion per DIN VDE 0282 / IEC 60811-404 2,000m HF & EMC Pump Cable
RoHS & REACH compliance: RoHS 2 (2011/65/EU + 2015/863) & REACH SVHC compliant

Reference standards

Governing standard: DIN VDE 0282 / IEC 60811-404 2,000m HF & EMC Pump Cable
Environmental & test standards: IEC 60228 / IEC 60332 / ISO 13628-5 / EN 10204
Quality management & inspection: ISO 9001:2015 & EN 10204 3.1 factory routine inspection

Identification

Model designation: S1BZ-F & VSCCB
Sheath colour & metre marking: Continuous metre-marked black outer finish (HF EVA (2km) / SnCu+EPR)
Customs tariff (HS): 8544.49 / 8544.60 / 8544.70

Sizes

3 standard S1BZ-F & VSCCB subsea & marine configurations

Manufactured to DIN VDE 0282 / IEC 60811-404 2,000m HF & EMC Pump Cable for subsea, offshore, deep-well and marine applications.

Dimensions, tensile load & weights
Order designation	Configuration	Core / stranding	Outer Ø ≈ mm	Net weight ≈ kg/km	Tensile rating kN ≈	Min. bend R mm
S1BZ-F & VSCCB Construction Schedule (−25…+90 °C)
S1BZ-F 4G16 mm²	4G16 mm² (3×16 + 1G16)	IEC 60228 Class 5 flexible Cu/SnCu	21.8	840	2.4	130
S1BZ-F 4G35 mm²	4G35 mm² (3×35 + 1G16)	IEC 60228 Class 5 flexible Cu/SnCu	28.6	1,620	5.2	172
S1BZ-F 3×70 + 3G16 mm²	3 × 70 mm² + 3G16 mm²	IEC 60228 Class 5 flexible Cu/SnCu	38.4	3,180	10.5	230

Typical values for this cable type; dimensions and weights for your order are confirmed in the quotation.
Custom core cross-sections, pair/fibre counts, armour grades and factory drum lengths available per DIN VDE 0282 / IEC 60811-404 2,000m HF & EMC Pump Cable.

Electrical, optical & thermal parameters
Configuration	Max. DC R₂₀ / Atten. Ω/km or dB/km	Rating / Impedance	Operating temp.
4G16 mm² (3×16 + 1G16)	1.21	0.6/1 kV (94 A submerged)	−25…+90 °C
4G35 mm² (3×35 + 1G16)	0.55	0.6/1 kV (152 A submerged)	−25…+90 °C
3 × 70 mm² + 3G16 mm²	0.27	0.6/1 kV (235 A submerged)	−25…+90 °C

Every production length undergoes routine conductor DC resistance, high-voltage dielectric or OTDR continuity and dimensional verification.

Quality & approvals

Testing & inspection

Routine tests on every production length, sample and type tests per batch — documented on an EN 10204 3.1 inspection certificate.

ConductorClass 5 stranding
Spark test100 % in-line
Lay-upCores, earth, fillers
SheathingInner, braid / screen, outer
Electrical testsAC voltage, resistance
DimensionsOD, wall thickness
Inspection documents & dispatchDrum & dispatch

Testing & inspection	Test value / reference	Frequency
Routine tests
Conductor resistance, continuity & dimensional verification (DIN VDE 0282 / IEC 60811-404 2,000m HF & EMC Pump Cable)	DC resistance at 20 °C / optical attenuation and outer diameter within DIN VDE 0282 / IEC 60811-404 2,000m HF & EMC Pump Cable tolerances	Every manufactured drum length
High-voltage dielectric & insulation resistance test (DIN VDE 0282 / IEC 60811-404 2,000m HF & EMC Pump Cable)	Zero dielectric breakdown and verified insulation resistance for 0.6/1 kV rating	Every manufactured drum length
Sample tests
Hydrostatic pressure, water-blocking & mechanical endurance qualification (DIN VDE 0282 / IEC 60811-404 2,000m HF & EMC Pump Cable)	Verified submersion integrity, tensile load and thermal stability across −25…+90 °C	Type qualification & periodic lot audit

Inspection certificate

Issued with every drum, listing the routine test results for that length.

Product approvals

VDE 0282 / EMC VFD CompliantEN 10204 3.1 Factory Test CertificateCE, RoHS 2 (2011/65/EU) & REACH

Company certificates

ISO 9001ISO 14001ISO 45001VDE marks approvalUL / cULCE · LVD / EMC

Marking & supply

Ordering & delivery

Sheath marking

TEBAOFLEX S1BZ-F & VSCCB VDE 0282 / EMC VFD 0.6/1 kV CE

Delivery form: Heavy-duty export fumigated wooden drums or steel subsea reels
Standard lengths: 500 m, 1,000 m or custom continuous subsea/wellbore lengths
MOQ: 100 m (standard configurations) · 500 m (custom builds)
Lead time: 2–5 weeks ex-works
Incoterms: EXW, FCA, FOB, CIF, DAP

Technical documents

Downloads

PDFS1BZ-F (2,000m HF) & VSCCB (500m EMC Screened) 0.6/1 kV Pump Cable – technical datasheet3 sizes · construction, technical data, approvals XLSXS1BZ-F & VSCCB spec data (Excel)All 3 sizes with dimensions and data, for your BOM or quotation

Revision: 2026-10-25
Updated: 2026-10-25

FAQ

Questions engineers ask first

Not covered here? Send your drawing — an engineer replies within 2 business hours.

What governing standard and construction define S1BZ-F & VSCCB (S1BZ-F (2,000m HF) & VSCCB (500m EMC Screened) 0.6/1 kV Pump Cable)?

S1BZ-F & VSCCB (S1BZ-F (2,000m HF) & VSCCB (500m EMC Screened) 0.6/1 kV Pump Cable) is manufactured in accordance with DIN VDE 0282 / IEC 60811-404 2,000m HF & EMC Pump Cable for 0.6/1 kV service over -25 °C to +90 °C. Its 4-layer construction comprises class 5 copper conductors (up to 240 mm²), 0.6/1 kv hepr / epr core insulation and tinned copper braid & oil-resistant sheath.

What is the minimum bending radius and operating temperature range for S1BZ-F & VSCCB?

The minimum bending radius for S1BZ-F & VSCCB is 6 × OD across its continuous operating temperature range of -25 °C to +90 °C, ensuring mechanical and dielectric reliability in subsea, marine and submersible service.

How are the concentric layers of S1BZ-F & VSCCB arranged from inside to outside?

From inside to outside, the construction sequence is: (01) Class 5 Copper Conductors (Up to 240 mm²) — Finely stranded plain copper (S1BZ-F) or tinned copper ≤6 mm² (VSCCB EMC Screened); (02) 0.6/1 kV HEPR / EPR Core Insulation — Reduced-wall HEPR (S1BZ-F 0.6/1 kV) or EPR (VSCCB EMC Screened) rated +90 °C; (03) Waterproof Anti-Bubble Inner Sheath — Special EPDM / EPR inner sheath preventing osmotic water-bubble formation under pressure; (04) Tinned Copper Braid & Oil-Resistant Sheath — Tinned Cu braid (VSCCB) + halogen-free oil-resistant EVA (2,000 m) or EPR (500 m) jacket.

What factory test certificates are supplied with S1BZ-F & VSCCB?

Every production drum of S1BZ-F & VSCCB undergoes routine conductor resistance/continuity, high-voltage dielectric and dimensional testing per DIN VDE 0282 / IEC 60811-404 2,000m HF & EMC Pump Cable, and is delivered with an EN 10204 3.1 factory test certificate.

Request a quote

Get an engineering quote for S1BZ-F & VSCCB

Your selection and application details are copied into the enquiry form below.

01Selected sizes

Use + Add next to a size or configuration.

02Reel & motion

Add your operating conditions here to include them in your enquiry.

Reel typeDrum core diameter (mm)Cable length on drum (m)Travel speed (m/min)Max. accelerationCycles per hourLength and quantityAmbient temperatureExposure (outdoor, water, oil, abrasion)Destination countryEquipment and operating conditions

03Message for our engineers

S1BZ-F (2,000m HF) & VSCCB (500m EMC Screened) 0.6/1 kV Pump Cable

Selected sizes:


Reel & motion:
- Reel type: 
- Drum core diameter (mm): 
- Cable length on drum (m): 
- Travel speed (m/min): 
- Max. acceleration: 
- Cycles per hour: 
- Length and quantity: 
- Ambient temperature: 
- Exposure (outdoor, water, oil, abrasion): 
- Destination country: 
- Equipment and operating conditions:

Send via WhatsApp