1 / 5

Product

240 bar aramid-braided subsea electro-hydraulic valve umbilical240 bar SAE 100R8 Hoses600 V + 22 Shielded Pairs9,000 daN Aramid (Ø84mm)

REF 56769 & REF 57330 240 bar Aramid Electro-Hydraulic Valve UmbilicalISO 13628-5 / SAE 100R8 · 600 V · 240 bar aramid-braided subsea electro-hydraulic

REF 56769 (12×3/8" Hoses + 22 Shielded Pairs + 4×1.5mm² Electro-Hydraulic Umbilical) & REF 57330 (8×1/2" SAE100R8 240 bar Hoses + Copper Ballast Aramid-Braided Valve Umbilical) (ISO 13628-5 / SAE 100R8, 600 V, -10 °C to +70 °C).

Water-resistant

EMC screen

Oil-resistant

Anti-torsion braid

Configuration

Order designation: REF 56769 3-Part / Compact Assembly
Outer Ø ≈: 28.5 mm
Net weight ≈: 920 kg/km
Tensile rating ≈: 25.0 kN
Core / stranding: Helical cabled composite umbilical

All sizes (3)

Request a quote Datasheet WhatsApp info@tebaoflex.com

Engineering reply in 2 business hoursCut-to-length export drumsEN 10204 3.1 certificate per drum

Rated voltage: 600 V
Operating temp.: −10…+70 °C
Min. bend radius: 12 × OD
Core / conductor: 12×3/8"
Outer protection: 9,000 daN Aramid
Standard: ISO 13628-5

Typical values for this cable type, based on ISO 13628-5 / SAE J517 100R8 240 bar Electro-Hydraulic — confirmed in the datasheet and quotation for your order.

Application fit

Is REF 56769 & REF 57330 right for your machine?

Immersion & wet locations

Suitable

Water-blocked core matrix and hydrolysis-resistant subsea jacketing withstand continuous deepwater hydrostatic pressure.

Vertical / spreader reel

Suitable

Torque-balanced aramid or contra-helical steel armour supports vertical winch deployment without hockling.

Offshore platform & shipboard deck trays

Suitable

Marine-grade outer sheath and armour package resist LARS sheave abrasion, UV exposure and salt-spray corrosion.

Trailing & towing

Suitable

High tensile breaking strength supports underwater towing, ROV excursion and seabed plough/trencher duty.

Energy chain / drag chain

Not suitable

Subsea umbilical and tow construction is not intended for high-cycle indoor factory drag chains.

Use Drag-Chain Servo Cable

Typical machinesMarine & Offshore CableWork-Class & Observation ROV SystemsOffshore Wind & Subsea Power GridsOceanographic, Sonar & Seismic SurveyCommercial Diving & Subsea Intervention

Construction

Layer by layer

Shown: REF 56769 & REF 57330 (ISO 13628-5 / SAE J517 100R8 240 bar Electro-Hydraulic) featuring hydraulic control hoses (12×3/8" / 8×1/2"), braided & jacketed pairs (12×2×1.0 mm²) and polyurethane outer sheath (ø83.5 / 84 mm) (5-layer construction).

Schematic, not to scale — generated from the layer data

#	Layer	Material & reference
1	Hydraulic Control Hoses (12×3/8" / 8×1/2")	12 × 3/8" hoses (REF 56769) or 8 × 1/2" SAE 100R8 240 bar hoses + Cu ballast (REF 57330)
2	Braided & Jacketed Pairs (12×2×1.0 mm²)	12 pairs of 1.0 mm² tinned copper with individual tinned Cu braid & PUR sheath (600 V)
3	Composite Sub-Cable (4×1.5 + 10×2×1.0)	Central PUR sub-cable housing 4×1.5 mm² power cores + 10×(2×1.0 mm²) Al/PET pairs
4	PUR Inner Sheath & 9,000 daN Aramid Braid	Extruded PUR inner bedding + aramid fibre braided strength member (90 kN)
5	Polyurethane Outer Sheath (Ø83.5 / 84 mm)	Heavy-duty black polyurethane outer jacket (–10 °C to +70 °C, 5.36 kg/m)

REF 56769 & REF 57330 — Standard Subsea & Marine Execution

Built to ISO 13628-5 / SAE J517 100R8 240 bar Electro-Hydraulic with hydraulic control hoses (12×3/8" / 8×1/2") and polyurethane outer sheath (ø83.5 / 84 mm)

REF 56769 & REF 57330 — Custom Drum Length & Termination Kit

Available in custom continuous subsea/wellbore drum lengths or pre-terminated assemblies

REF 56769 & REF 57330 — Routine & Hydrostatic Test Certified

Supplied with EN 10204 3.1 routine dielectric, resistance & pressure/dimensional report

Technical data

Ratings & operating limits

Typical values: Typical values for this cable type, based on ISO 13628-5 / SAE J517 100R8 240 bar Electro-Hydraulic. Values for your order are confirmed in the datasheet and quotation.

Electrical

Rated voltage / transmission duty: 600 V (ISO 13628-5 / SAE J517 100R8 240 bar Electro-Hydraulic)
Core / conductor construction: Hydraulic Control Hoses (12×3/8" / 8×1/2") — 12 × 3/8" hoses (REF 56769) or 8 × 1/2" SAE 100R8 240 bar hoses + Cu ballast (REF 57330)
Primary dielectric / buffering: Braided & Jacketed Pairs (12×2×1.0 mm²) — 12 pairs of 1.0 mm² tinned copper with individual tinned Cu braid & PUR sheath (600 V)

Thermal

Continuous operating temperature: −10…+70 °C (subsea, marine & submersible duty)
Short-circuit / peak thermal rating: Verified thermal stability per ISO 13628-5 / SAE J517 100R8 240 bar Electro-Hydraulic
Storage & transport temperature: −40…+80 °C on export wooden/steel drum

Mechanical

Outer protection / armouring: Polyurethane Outer Sheath (Ø83.5 / 84 mm) — Heavy-duty black polyurethane outer jacket (–10 °C to +70 °C, 5.36 kg/m)
Minimum bending radius: 12 × OD
Hydrostatic, tensile & crush duty: PUR Inner Sheath & 9,000 daN Aramid Braid — Extruded PUR inner bedding + aramid fibre braided strength member (90 kN)

Resistance

Hydrostatic pressure & water blocking: Engineered for continuous submersion and hydrostatic integrity per ISO 13628-5 / SAE J517 100R8 240 bar Electro-Hydraulic
Seawater, oil & chemical resistance: Resistant to seawater hydrolysis, hydraulic oils and abrasion per ISO 13628-5 / SAE J517 100R8 240 bar Electro-Hydraulic
RoHS & REACH compliance: RoHS 2 (2011/65/EU + 2015/863) & REACH SVHC compliant

Reference standards

Governing standard: ISO 13628-5 / SAE J517 100R8 240 bar Electro-Hydraulic
Environmental & test standards: IEC 60228 / IEC 60332 / ISO 13628-5 / EN 10204
Quality management & inspection: ISO 9001:2015 & EN 10204 3.1 factory routine inspection

Identification

Model designation: REF 56769 & REF 57330
Sheath colour & metre marking: Continuous metre-marked black outer finish (9,000 daN Aramid + PUR)
Customs tariff (HS): 8544.49 / 8544.60 / 8544.70

Sizes

3 standard REF 56769 & REF 57330 subsea & marine configurations

Manufactured to ISO 13628-5 / SAE J517 100R8 240 bar Electro-Hydraulic for subsea, offshore, deep-well and marine applications.

Dimensions, tensile load & weights
Order designation	Configuration	Core / stranding	Outer Ø ≈ mm	Net weight ≈ kg/km	Tensile rating kN ≈	Min. bend R mm
REF 56769 & REF 57330 Construction Schedule (−10…+70 °C)
REF 56769 3-Part / Compact Assembly	Gas/Hydraulic Hose + Power + Comms/Coax	Helical cabled composite umbilical	28.5	920	25.0	285
REF 56769 4-Part / Standard Assembly	Dual Hose + 75 Ω Video Coax + Comms Pairs	Helical cabled composite umbilical	36.0	1,540	48.0	360
REF 56769 Heavy Bell / Intervention	Multi-Hose + 3×Coax + Power/Signal Quads	Aramid-reinforced subsea umbilical	54.0	3,420	90.0	540

Typical values for this cable type; dimensions and weights for your order are confirmed in the quotation.
Custom core cross-sections, pair/fibre counts, armour grades and factory drum lengths available per ISO 13628-5 / SAE J517 100R8 240 bar Electro-Hydraulic.

Electrical, optical & thermal parameters
Configuration	Max. DC R₂₀ / Atten. Ω/km or dB/km	Rating / Impedance	Operating temp.
Gas/Hydraulic Hose + Power + Comms/Coax	4.95	600 V + 35–240 bar Fluid	−10…+70 °C
Dual Hose + 75 Ω Video Coax + Comms Pairs	3.30	600 V + 35–240 bar Fluid	−10…+70 °C
Multi-Hose + 3×Coax + Power/Signal Quads	1.91	600 V + 100–240 bar Fluid	−10…+70 °C

Every production length undergoes routine conductor DC resistance, high-voltage dielectric or OTDR continuity and dimensional verification.

Quality & approvals

Testing & inspection

Routine tests on every production length, sample and type tests per batch — documented on an EN 10204 3.1 inspection certificate.

ConductorClass 5 stranding
Spark test100 % in-line
Lay-upCores, earth, fillers
SheathingInner, braid / screen, outer
Electrical testsAC voltage, resistance
DimensionsOD, wall thickness
Inspection documents & dispatchDrum & dispatch

Testing & inspection	Test value / reference	Frequency
Routine tests
Conductor resistance, continuity & dimensional verification (ISO 13628-5 / SAE J517 100R8 240 bar Electro-Hydraulic)	DC resistance at 20 °C / optical attenuation and outer diameter within ISO 13628-5 / SAE J517 100R8 240 bar Electro-Hydraulic tolerances	Every manufactured drum length
High-voltage dielectric & insulation resistance test (ISO 13628-5 / SAE J517 100R8 240 bar Electro-Hydraulic)	Zero dielectric breakdown and verified insulation resistance for 600 V rating	Every manufactured drum length
Sample tests
Hydrostatic pressure, water-blocking & mechanical endurance qualification (ISO 13628-5 / SAE J517 100R8 240 bar Electro-Hydraulic)	Verified submersion integrity, tensile load and thermal stability across −10…+70 °C	Type qualification & periodic lot audit

Inspection certificate

Issued with every drum, listing the routine test results for that length.

Product approvals

ISO 13628-5 / SAE 100R8 CompliantEN 10204 3.1 Factory Test CertificateCE, RoHS 2 (2011/65/EU) & REACH

Company certificates

ISO 9001ISO 14001ISO 45001VDE marks approvalUL / cULCE · LVD / EMC

Marking & supply

Ordering & delivery

Sheath marking

TEBAOFLEX REF 56769 & REF 57330 ISO 13628-5 / SAE 100R8 600 V CE

Delivery form: Heavy-duty export fumigated wooden drums or steel subsea reels
Standard lengths: 500 m, 1,000 m or custom continuous subsea/wellbore lengths
MOQ: 100 m (standard configurations) · 500 m (custom builds)
Lead time: 2–5 weeks ex-works
Incoterms: EXW, FCA, FOB, CIF, DAP

Technical documents

Downloads

PDFREF 56769 & REF 57330 240 bar Aramid Electro-Hydraulic Valve Umbilical – technical datasheet3 sizes · construction, technical data, approvals XLSXREF 56769 & REF 57330 spec data (Excel)All 3 sizes with dimensions and data, for your BOM or quotation

Revision: 2026-10-25
Updated: 2026-10-25

FAQ

Questions engineers ask first

Not covered here? Send your drawing — an engineer replies within 2 business hours.

What governing standard and construction define REF 56769 & REF 57330 (REF 56769 & REF 57330 240 bar Aramid Electro-Hydraulic Valve Umbilical)?

REF 56769 & REF 57330 (REF 56769 & REF 57330 240 bar Aramid Electro-Hydraulic Valve Umbilical) is manufactured in accordance with ISO 13628-5 / SAE J517 100R8 240 bar Electro-Hydraulic for 600 V service over -10 °C to +70 °C. Its 5-layer construction comprises hydraulic control hoses (12×3/8" / 8×1/2"), braided & jacketed pairs (12×2×1.0 mm²) and polyurethane outer sheath (ø83.5 / 84 mm).

What is the minimum bending radius and operating temperature range for REF 56769 & REF 57330?

The minimum bending radius for REF 56769 & REF 57330 is 12 × OD across its continuous operating temperature range of -10 °C to +70 °C, ensuring mechanical and dielectric reliability in subsea, marine and submersible service.

How are the concentric layers of REF 56769 & REF 57330 arranged from inside to outside?

From inside to outside, the construction sequence is: (01) Hydraulic Control Hoses (12×3/8" / 8×1/2") — 12 × 3/8" hoses (REF 56769) or 8 × 1/2" SAE 100R8 240 bar hoses + Cu ballast (REF 57330); (02) Braided & Jacketed Pairs (12×2×1.0 mm²) — 12 pairs of 1.0 mm² tinned copper with individual tinned Cu braid & PUR sheath (600 V); (03) Composite Sub-Cable (4×1.5 + 10×2×1.0) — Central PUR sub-cable housing 4×1.5 mm² power cores + 10×(2×1.0 mm²) Al/PET pairs; (04) PUR Inner Sheath & 9,000 daN Aramid Braid — Extruded PUR inner bedding + aramid fibre braided strength member (90 kN); (05) Polyurethane Outer Sheath (Ø83.5 / 84 mm) — Heavy-duty black polyurethane outer jacket (–10 °C to +70 °C, 5.36 kg/m).

What factory test certificates are supplied with REF 56769 & REF 57330?

Every production drum of REF 56769 & REF 57330 undergoes routine conductor resistance/continuity, high-voltage dielectric and dimensional testing per ISO 13628-5 / SAE J517 100R8 240 bar Electro-Hydraulic, and is delivered with an EN 10204 3.1 factory test certificate.

Request a quote

Get an engineering quote for REF 56769 & REF 57330

Your selection and application details are copied into the enquiry form below.

01Selected sizes

Use + Add next to a size or configuration.

02Reel & motion

Add your operating conditions here to include them in your enquiry.

Reel typeDrum core diameter (mm)Cable length on drum (m)Travel speed (m/min)Max. accelerationCycles per hourLength and quantityAmbient temperatureExposure (outdoor, water, oil, abrasion)Destination countryEquipment and operating conditions

03Message for our engineers

REF 56769 & REF 57330 240 bar Aramid Electro-Hydraulic Valve Umbilical

Selected sizes:


Reel & motion:
- Reel type: 
- Drum core diameter (mm): 
- Cable length on drum (m): 
- Travel speed (m/min): 
- Max. acceleration: 
- Cycles per hour: 
- Length and quantity: 
- Ambient temperature: 
- Exposure (outdoor, water, oil, abrasion): 
- Destination country: 
- Equipment and operating conditions:

Send via WhatsApp