1 / 5

Product

Overall-screened subsea interconnection cable 600 V Subsea8×16 AWG + OS Mouldable PUR

P8C16#OS 600 V 8×16 AWG Screened Subsea CableISO 13628-5 / IEC 60092-350 · 600 V · -40 °C to +80 °C screened PUR underwater whip cable

Water-resistant

EMC screen

Low-EMC design

Oil-resistant

Configuration

Order designation: P8C16#OS (8×16 AWG Screened Subsea)
Outer Ø ≈: 12.7 mm
Weight ≈: 235 kg/km
Tensile load ≈: 2.1 kN
Core / stranding: 26/30 AWG tinned Cu + OS braid

All sizes (3)

Request a quote Datasheet WhatsApp info@tebaoflex.com

Engineering reply in 2 business hoursCut-to-length export drumsEN 10204 3.1 certificate per drum

Rated voltage: 600 V AC/DC
Operating temp.: −40…+80 °C
Min. bend radius: 6–10 × OD
Core / conductor: 8×16 AWG Cu
Outer protection: Subsea Black PUR
Standard: ISO 13628-5

Typical values for this cable type, based on ISO 13628-5 / IEC 60092-350 — confirmed in the datasheet and quotation for your order.

Application fit

Is P8C16#OS right for your machine?

Immersion & wet locations

Suitable

Polyether-based black polyurethane jacket bonds cleanly to neoprene and polyurethane subsea connector overmoulds.

Offshore platform & shipboard deck trays

Suitable

Engineered for ROV manipulators, cameras, CTD profilers, subsea valve packs and wet-mateable bulkhead whips.

Vertical / spreader reel

Suitable

Flexible stranded tinned copper cores and fibrillated PP fillers maintain circular profile under hydrostatic pressure.

Furnace, kiln & high-temp zone

Not suitable

Rated up to +80 °C in air and +60 °C in continuous seawater immersion; not for high-temperature furnaces.

(N)7YRDGOEU-J

Typical machinesMarine & Offshore CableSubsea Wet-Mateable Connector Whips & HarnessesROV Cameras, Sonar Heads, Pan/Tilt & Thruster JumpersOceanographic CTD, ADCP & Seabed Lander TelemetryOffshore Subsea Control Modules (SCM) & Valve Packs

Construction

Layer by layer

Shown: P8C16#OS (ISO 13628-5 / IEC 60092-350) featuring conductors (8x16 awg / 1.34 mm²), primary core insulation and subsea outer jacket (5-layer construction).

Schematic, not to scale — generated from the layer data

#	Layer	Material & reference
1	Conductors (8x16 AWG / 1.34 mm²)	Eight 16 AWG (1.34 mm²) flexible stranded electrolytic tinned copper conductors for subsea connector whips and ROV sensorsISO 13628-5 / IEC 60092-350
2	Primary Core Insulation	High-insulation-resistance color-coded polypropylene (PP) core insulation (Black, White, Red, Green, Orange, Blue, Yellow, Brown)ISO 13628-5 / IEC 60092-350
3	Bedding & Separator Tape	Non-hygroscopic fibrillated polypropylene interstitial fillers wrapped with a clear polyester (PET) binder tapeISO 13628-5 / IEC 60092-350
4	Overall Braided Shield (OS)	Overall braided tinned copper electromagnetic shield (OS) providing >= 85% optical coverage for low-noise subsea telemetryISO 13628-5 / IEC 60092-350
5	Subsea Outer Jacket	Heavy-duty black polyether polyurethane (PUR) outer jacket formulated for continuous deep-water immersion and wet-mate overmoldingISO 13628-5 / IEC 60092-350

P8C16#OS — Standard Execution

Built to ISO 13628-5 / IEC 60092-350 with conductors (8x16 awg / 1.34 mm²) and subsea outer jacket

P8C16#OS — Custom Length & Configuration

Available in custom drum lengths, core counts or factory-terminated assemblies

P8C16#OS — Factory Routine Certified

Supplied with EN 10204 3.1 routine electrical, dielectric & dimensional inspection report

Technical data

Ratings & operating limits

Typical values: Typical values for this cable type, based on ISO 13628-5 / IEC 60092-350. Values for your order are confirmed in the datasheet and quotation.

Electrical

Rated voltage / transmission duty: 600 V AC/DC (ISO 13628-5 / IEC 60092-350)
Core / conductor construction: Conductors (8x16 AWG / 1.34 mm²) — Eight 16 AWG (1.34 mm²) flexible stranded electrolytic tinned copper conductors for subsea connector whips and ROV sensors
Primary dielectric / insulation: Primary Core Insulation — High-insulation-resistance color-coded polypropylene (PP) core insulation (Black, White, Red, Green, Orange, Blue, Yellow, Brown)

Thermal

Continuous operating temperature: −40…+80 °C (rated operating envelope)
Storage & transport temperature: −40…+80 °C on export drum or reel

Mechanical

Outer protection / sheath: Subsea Outer Jacket — Heavy-duty black polyether polyurethane (PUR) outer jacket formulated for continuous deep-water immersion and wet-mate overmolding
Minimum bending radius: 6–10 × OD
Structural layer count: 5 concentric functional layers

Resistance

Environmental & chemical resistance: Industrial moisture, oils and mechanical wear per ISO 13628-5 / IEC 60092-350
RoHS & REACH compliance: RoHS 2 (2011/65/EU + 2015/863) & REACH SVHC compliant

Reference standards

Governing standard: ISO 13628-5 / IEC 60092-350
Quality management & inspection: ISO 9001:2015 & EN 10204 3.1 factory routine inspection

Identification

Model designation: P8C16#OS
Customs tariff (HS): 8544.49 / 8544.60 / 8544.70

Sizes

3 standard P8C16#OS configurations

Manufactured to ISO 13628-5 / IEC 60092-350 for heavy-duty industrial and specialty engineering systems.

Dimensions, tensile ratings & weights
Order designation	Configuration	Core / stranding	Outer Ø ≈ mm	Weight ≈ kg/km	Tensile load kN ≈	Min. bend R mm
P8C16#OS Construction Schedule (−40…+80 °C)
P4C16#OS (4×16 AWG Screened Subsea)	4 × 16 AWG (1.34 mm²)	26/30 AWG tinned Cu + OS braid	9.6	135	1.1	60
P8C16#OS (8×16 AWG Screened Subsea)	8 × 16 AWG (1.34 mm²)	26/30 AWG tinned Cu + OS braid	12.7	235	2.1	80
P12C16#OS (12×16 AWG Screened Subsea)	12 × 16 AWG (1.34 mm²)	26/30 AWG tinned Cu + OS braid	14.9	330	3.0	90

Typical values for this cable type; dimensions and weights for your order are confirmed in the quotation.
Custom core counts, cross-sections, sheath colours and factory-tested cut lengths available per ISO 13628-5 / IEC 60092-350.

Electrical, optical & thermal parameters
Configuration	Max. DC R₂₀ / Atten. Ω/km or dB/km	Rating / Capacity	Operating temp.
4 × 16 AWG (1.34 mm²)	14.60	600 V / 13 A per core	−40…+80 °C
8 × 16 AWG (1.34 mm²)	14.60	600 V / 10 A per core	−40…+80 °C
12 × 16 AWG (1.34 mm²)	14.60	600 V / 8.5 A per core	−40…+80 °C

Every production length undergoes routine conductor DC resistance, high-voltage dielectric and dimensional verification.

Quality & approvals

Testing & inspection

Routine tests on every production length, sample and type tests per batch — documented on an EN 10204 3.1 inspection certificate.

ConductorClass 5 stranding
Spark test100 % in-line
Lay-upCores, earth, fillers
SheathingInner, braid / screen, outer
Electrical testsAC voltage, resistance
DimensionsOD, wall thickness
Inspection documents & dispatchDrum & dispatch

Testing & inspection	Test value / reference	Frequency
Routine tests
Conductor resistance & dimensional verification (ISO 13628-5 / IEC 60092-350)	Electrical parameters and outer diameter within ISO 13628-5 / IEC 60092-350 tolerances	Every manufactured drum / length
High-voltage dielectric & insulation resistance test (ISO 13628-5 / IEC 60092-350)	Zero dielectric breakdown and verified insulation resistance over full length	Every manufactured drum / length
Sample tests
Thermal ageing, mechanical flexing & environmental qualification (ISO 13628-5 / IEC 60092-350)	Verified structural and dielectric integrity across −40…+80 °C	Type qualification & periodic lot audit

Inspection certificate

Issued with every drum, listing the routine test results for that length.

Product approvals

ISO 13628-5 CompliantEN 10204 3.1 Factory Test CertificateCE, RoHS 2 (2011/65/EU) & REACH

Company certificates

ISO 9001ISO 14001ISO 45001VDE marks approvalUL / cULCE · LVD / EMC

Marking & supply

Ordering & delivery

Sheath marking

TEBAOFLEX P8C16#OS ISO 13628-5 600 V AC/DC CE

Delivery form: Heavy-duty export wooden/steel drums or factory-tested coils
Standard lengths: 100 m, 250 m, 500 m, 1,000 m or custom cut-to-length reels
MOQ: 100 m (standard configurations) · 300 m (custom builds)
Lead time: 2–4 weeks ex-works
Incoterms: EXW, FCA, FOB, CIF, DAP

Technical documents

Downloads

PDFP8C16#OS 600 V 8×16 AWG Screened Subsea Cable – technical datasheet3 sizes · construction, technical data, approvals XLSXP8C16#OS spec data (Excel)All 3 sizes with dimensions and data, for your BOM or quotation

Revision: 2026-10-23
Updated: 2026-10-23

FAQ

Questions engineers ask first

Not covered here? Send your drawing — an engineer replies within 2 business hours.

What applications is P8C16#OS engineered for?

P8C16#OS 600 V overall-screened subsea interconnection cable combining 8 × 16 AWG (1.34 mm²) flexible tinned copper conductors, color-coded PP insulation, fibrillated PP fillers, ≥85% tinned copper braid shield (OS) and a black subsea PUR jacket. It is built to ISO 13628-5 / IEC 60092-350 for subsea wet-mateable connector whips & harnesses and rov cameras, sonar heads, pan/tilt & thruster jumpers.

What are the minimum bending radius and operating temperature range for P8C16#OS?

The minimum bending radius for P8C16#OS is 6–10 × OD across its continuous operating temperature range of -40 °C to +80 °C, ensuring mechanical and dielectric stability in industrial service.

How are the concentric layers of P8C16#OS arranged from inside to outside?

From inside to outside, the construction sequence is: (01) Conductors (8x16 AWG / 1.34 mm²) (Eight 16 AWG (1.34 mm²) flexible stranded electrolytic tinned copper conductors for subsea connector whips and ROV sensors); (02) Primary Core Insulation (High-insulation-resistance color-coded polypropylene (PP) core insulation (Black, White, Red, Green, Orange, Blue, Yellow, Brown)); (03) Bedding & Separator Tape (Non-hygroscopic fibrillated polypropylene interstitial fillers wrapped with a clear polyester (PET) binder tape); (04) Overall Braided Shield (OS) (Overall braided tinned copper electromagnetic shield (OS) providing >= 85% optical coverage for low-noise subsea telemetry); (05) Subsea Outer Jacket (Heavy-duty black polyether polyurethane (PUR) outer jacket formulated for continuous deep-water immersion and wet-mate overmolding).

What factory test certificates are supplied with P8C16#OS?

Every production drum of P8C16#OS undergoes routine electrical continuity, high-voltage dielectric and dimensional testing per ISO 13628-5 / IEC 60092-350, and is delivered with an EN 10204 3.1 factory test certificate.

Request a quote

Get an engineering quote for P8C16#OS

Your selection and application details are copied into the enquiry form below.

01Selected sizes

Use + Add next to a size or configuration.

02Reel & motion

Add your operating conditions here to include them in your enquiry.

Reel typeDrum core diameter (mm)Cable length on drum (m)Travel speed (m/min)Max. accelerationCycles per hourLength and quantityAmbient temperatureExposure (outdoor, water, oil, abrasion)Destination countryEquipment and operating conditions

03Message for our engineers

P8C16#OS 600 V 8×16 AWG Screened Subsea Cable

Selected sizes:


Reel & motion:
- Reel type: 
- Drum core diameter (mm): 
- Cable length on drum (m): 
- Travel speed (m/min): 
- Max. acceleration: 
- Cycles per hour: 
- Length and quantity: 
- Ambient temperature: 
- Exposure (outdoor, water, oil, abrasion): 
- Destination country: 
- Equipment and operating conditions:

Send via WhatsApp