1 / 5

Product

IEC 61158-2 PB-HYBRID 2×0.34 + 4×1.5 PUR IEC 61158-2 / UL AWM 21198300 V−40…+80 °C

PROFIBUS Data + Power PUR Drag-Chain Hybrid Bus CableIEC 61158-2 / UL AWM 21198 · 300 V · -40 °C to +80 °C industrial PB-HYBRID 2×0.34 + 4×1.5 PUR

PROFIBUS Data + Power PUR Drag-Chain Hybrid Bus Cable engineered to IEC 61158-2 / UL AWM 21198 for 300 V service across -40 °C to +80 °C, featuring stranded copper conductor and pur outer sheath ral 4001 with minimum bending radius 7.5 × OD.

Approved

Low-EMC design

EMC screen

Oil-resistant

Configuration

Order designation: PB-HYBRID 2×0.34 + 4×1.5 PUR 4G2.5
Outer Ø ≈: 10.8 mm
Total weight ≈: 186 kg/km
Min. bend R (fixed): 86 mm
Configuration: 4 × 2.5 mm²

All sizes (12)

Request a quote Datasheet WhatsApp info@tebaoflex.com

Engineering reply in 2 business hoursCut-to-length export drumsEN 10204 3.1 certificate per drum

Rated voltage: 300 V
Operating temp.: −40…+80 °C
Min. bend radius: 7.5 × OD
Conductor: copper conductor
Outer layer: PUR outer sheath
Standard: IEC 61158-2

Typical values for this cable type, based on IEC 61158-2 / UL AWM 21198 — confirmed in the datasheet and quotation for your order.

Application fit

Is PB-HYBRID 2×0.34 + 4×1.5 PUR right for your machine?

Energy chain / drag chain

Suitable

Engineered and verified for chain service in accordance with IEC 61158-2 / UL AWM 21198.

Fixed installation

Suitable

Engineered and verified for fixed service in accordance with IEC 61158-2 / UL AWM 21198.

Switchgear & control cabinet wiring

Suitable

Suitable for switchgear, control panels and equipment terminations within 7.5 × OD bend radius.

TBM gantry & advancing tunnel reel

With conditions

Use mechanical conduit or armoured protection where exposed to rock fall or crushing loads.

Typical machinesIndustrial Automation CableAutomated Assembly & Packaging LinesCNC Machine Tools & RoboticsPLC/DCS Control & Marshalling CabinetsIndustrial Drives & Motor Manufacturing

Construction

Layer by layer

Shown: PB-HYBRID 2×0.34 + 4×1.5 PUR (IEC 61158-2 / UL AWM 21198) with stranded copper conductor, tpe core insulation and pur outer sheath ral 4001 (5-layer construction).

Schematic, not to scale — generated from the layer data

#	Layer	Material & reference
1	Stranded copper conductor	High-conductivity copper conductor per IEC 61158-2 / UL AWM 21198IEC 61158-2 / UL AWM 21198
2	TPE core insulation	Extruded TPE dielectric (individual core / group layer)IEC 61158-2 / UL AWM 21198
3	Signal tinned copper braid	Signal tinned copper braid high-coverage braided layer (individual core / group layer)IEC 61158-2 / UL AWM 21198
4	Cellular PE core insulation	Extruded Cellular PE dielectric (individual core / group layer)IEC 61158-2 / UL AWM 21198
5	PUR outer sheath RAL 4001	Extruded PUR outer sheath RAL 4001 protective layer (continuous layer)IEC 61158-2 / UL AWM 21198

PB-HYBRID 2×0.34 + 4×1.5 PUR — Standard Execution

Built to IEC 61158-2 / UL AWM 21198 with stranded copper conductor and pur outer sheath ral 4001

PB-HYBRID 2×0.34 + 4×1.5 PUR — Custom Cross-Sections

Full range of metric mm² and AWG/kcmil conductor sizes per IEC 61158-2 / UL AWM 21198

PB-HYBRID 2×0.34 + 4×1.5 PUR — Export Drum Supply

Supplied with EN 10204 3.1 routine dielectric & conductor resistance test certificate

Technical data

Ratings & operating limits

Typical values: Typical values for this cable type, based on IEC 61158-2 / UL AWM 21198. Values for your order are confirmed in the datasheet and quotation.

Electrical

Rated voltage / duty: 300 V (IEC 61158-2 / UL AWM 21198)
Conductor construction: Stranded copper conductor — High-conductivity copper conductor per IEC 61158-2 / UL AWM 21198
Primary insulation / dielectric: TPE core insulation — Extruded TPE dielectric (individual core / group layer)

Thermal

Continuous operating temperature: −40…+80 °C per IEC 61158-2 / UL AWM 21198
Short-circuit / peak thermal limit: +160 °C to +250 °C (5 s adiabatic limit depending on dielectric class)
Minimum installation temperature: −5 °C (thermoplastic) / −25 °C (cross-linked or elastomer) / −40 °C (metallic)

Mechanical

Outer protection / covering: PUR outer sheath RAL 4001 — Extruded PUR outer sheath RAL 4001 protective layer (continuous layer)
Minimum bending radius: 7.5 × OD (installed / static routing)
Layer count & geometry: 5 concentric/structural layers verified by cross-section inspection

Resistance

Environmental & chemical durability: Engineered for industrial service in accordance with IEC 61158-2 / UL AWM 21198
RoHS & REACH compliance: RoHS 2 (2011/65/EU + 2015/863) & REACH SVHC compliant

Reference standards

Governing product standard: IEC 61158-2 / UL AWM 21198
Quality management & inspection: ISO 9001:2015 & EN 10204 3.1 factory routine inspection

Identification

Model designation: PB-HYBRID 2×0.34 + 4×1.5 PUR
Customs tariff (HS): 8544.49 / 8544.60 / 7614.10

Sizes

12 standard PB-HYBRID 2×0.34 + 4×1.5 PUR cable sizes

Manufactured to IEC 61158-2 / UL AWM 21198 across standard single-core and multi-core cross-sections.

Dimensions, construction & weights
Order designation	Configuration	Outer Ø ≈ mm	Weight ≈ kg/km	Min. bend R fixed mm
PB-HYBRID 2×0.34 + 4×1.5 PUR Standard Production Schedule (300 V · −40…+80 °C)
PB-HYBRID 2×0.34 + 4×1.5 PUR 3G1.5	3 × 1.5 mm²	8.4	105	68
PB-HYBRID 2×0.34 + 4×1.5 PUR 4G1.5	4 × 1.5 mm²	9.2	128	74
PB-HYBRID 2×0.34 + 4×1.5 PUR 5G1.5	5 × 1.5 mm²	10.1	156	81
PB-HYBRID 2×0.34 + 4×1.5 PUR 3G2.5	3 × 2.5 mm²	9.8	148	78
PB-HYBRID 2×0.34 + 4×1.5 PUR 4G2.5	4 × 2.5 mm²	10.8	186	86
PB-HYBRID 2×0.34 + 4×1.5 PUR 5G2.5	5 × 2.5 mm²	11.9	228	95
PB-HYBRID 2×0.34 + 4×1.5 PUR 4G4	4 × 4.0 mm²	12.6	268	101
PB-HYBRID 2×0.34 + 4×1.5 PUR 4G6	4 × 6.0 mm²	14.2	365	114
PB-HYBRID 2×0.34 + 4×1.5 PUR 4G10	4 × 10 mm²	17.5	580	140
PB-HYBRID 2×0.34 + 4×1.5 PUR 4G16	4 × 16 mm²	20.4	845	163
PB-HYBRID 2×0.34 + 4×1.5 PUR 4G25	4 × 25 mm²	24.8	1,290	198
PB-HYBRID 2×0.34 + 4×1.5 PUR 4G35	4 × 35 mm²	27.9	1,710	223

Typical values for this cable type; dimensions and weights for your order are confirmed in the quotation.
Single-core and multi-core sizes from 0.5 mm² up to 630 mm² (or AWG/kcmil) available per IEC 61158-2 / UL AWM 21198.

Conductor resistance & current-carrying capacity
Cross-section	Max. DC R₂₀ Ω/km	Current in air A (30 °C) ≈	Voltage drop mV/A·m
1.5 mm² (AWG 16)	13.30	18	29.0
2.5 mm² (AWG 14)	7.98	26	17.5
4.0 mm² (AWG 12)	4.95	34	10.9
6.0 mm² (AWG 10)	3.30	44	7.3
10 mm² (AWG 8)	1.91	61	4.2
16 mm² (AWG 6)	1.21	82	2.7
25 mm² (AWG 4)	0.78	108	1.7
35 mm² (AWG 2)	0.55	135	1.2

Current ratings are for 3 loaded conductors at 30 °C ambient in free air/tray per IEC 60364-5-52 / NEC.

Quality & approvals

Testing & inspection

Routine tests on every production length, sample and type tests per batch — documented on an EN 10204 3.1 inspection certificate.

ConductorClass 5 stranding
Spark test100 % in-line
Lay-upCores, earth, fillers
SheathingInner, braid / screen, outer
Electrical testsAC voltage, resistance
DimensionsOD, wall thickness
Inspection documents & dispatchDrum & dispatch

Testing & inspection	Test value / reference	Frequency
Routine tests
Conductor DC resistance & dimensional verification (IEC 61158-2 / UL AWM 21198)	DC resistance at 20 °C and geometry within IEC 61158-2 / UL AWM 21198 class limits	Every manufactured drum / spool
Routine dielectric / spark / structural integrity test (IEC 61158-2 / UL AWM 21198)	Zero breakdown or structural defect over full production length	Every manufactured drum / spool
Sample tests
Thermal aging, mechanical & material qualification (IEC 61158-2 / UL AWM 21198)	Full compliance with IEC 61158-2 / UL AWM 21198 across −40…+80 °C	Type qualification & periodic sample audit

Inspection certificate

Issued with every drum, listing the routine test results for that length.

Product approvals

IEC 61158-2 CompliantEN 10204 3.1 Routine Test CertificateCE, RoHS 2 (2011/65/EU) & REACH

Company certificates

ISO 9001ISO 14001ISO 45001VDE marks approvalUL / cULCE · LVD / EMC

Marking & supply

Ordering & delivery

Sheath marking

TEBAOFLEX PB-HYBRID 2×0.34 + 4×1.5 PUR <size> IEC 61158-2 300 V CE

Delivery form: Non-returnable fumigated wooden drums or precision DIN spools
Standard lengths: 500 m · 1000 m · 2000 m drums (custom cut lengths on request)
MOQ: 500 m (stock sizes) · 1000 m (custom production)
Lead time: 2–4 weeks ex-works
Incoterms: EXW, FCA, FOB, CIF, DAP

Technical documents

Downloads

PDFPROFIBUS Data + Power PUR Drag-Chain Hybrid Bus Cable – technical datasheet12 sizes · construction, technical data, approvals XLSXPB-HYBRID 2×0.34 + 4×1.5 PUR spec data (Excel)All 12 sizes with dimensions and data, for your BOM or quotation

Revision: 2026-10-21
Updated: 2026-10-21

FAQ

Questions engineers ask first

Not covered here? Send your drawing — an engineer replies within 2 business hours.

What governing standard and construction define PB-HYBRID 2×0.34 + 4×1.5 PUR (PROFIBUS Data + Power PUR Drag-Chain Hybrid Bus Cable)?

PB-HYBRID 2×0.34 + 4×1.5 PUR (PROFIBUS Data + Power PUR Drag-Chain Hybrid Bus Cable) is manufactured in accordance with IEC 61158-2 / UL AWM 21198 for 300 V service over -40 °C to +80 °C. Its 5-layer construction comprises stranded copper conductor, tpe core insulation, signal tinned copper braid, cellular pe core insulation, pur outer sheath ral 4001.

What is the minimum bending radius and installation temperature for PB-HYBRID 2×0.34 + 4×1.5 PUR?

The minimum installed bending radius for PB-HYBRID 2×0.34 + 4×1.5 PUR is 7.5 × OD across its continuous operating temperature range of -40 °C to +80 °C, ensuring mechanical and dielectric stability without conductor or insulation strain.

How are the concentric layers of PB-HYBRID 2×0.34 + 4×1.5 PUR arranged from inside to outside?

From inside to outside, the construction sequence is: (01) Stranded copper conductor (High-conductivity copper conductor per IEC 61158-2 / UL AWM 21198); (02) TPE core insulation (Extruded TPE dielectric (individual core / group layer)); (03) Signal tinned copper braid (Signal tinned copper braid high-coverage braided layer (individual core / group layer)); (04) Cellular PE core insulation (Extruded Cellular PE dielectric (individual core / group layer)); (05) PUR outer sheath RAL 4001 (Extruded PUR outer sheath RAL 4001 protective layer (continuous layer)).

What factory test certificates are supplied with PB-HYBRID 2×0.34 + 4×1.5 PUR?

Every production drum or spool of PB-HYBRID 2×0.34 + 4×1.5 PUR undergoes routine conductor DC resistance, dimensional and dielectric/integrity testing per IEC 61158-2 / UL AWM 21198, and is delivered with an EN 10204 3.1 factory test certificate.

Request a quote

Get an engineering quote for PB-HYBRID 2×0.34 + 4×1.5 PUR

Your selection and application details are copied into the enquiry form below.

01Selected sizes

Use + Add next to a size or configuration.

02Reel & motion

Add your operating conditions here to include them in your enquiry.

Reel typeDrum core diameter (mm)Cable length on drum (m)Travel speed (m/min)Max. accelerationCycles per hourLength and quantityAmbient temperatureExposure (outdoor, water, oil, abrasion)Destination countryEquipment and operating conditions

03Message for our engineers

PB-HYBRID 2×0.34 + 4×1.5 PUR PROFIBUS Data + Power PUR Drag-Chain Hybrid Bus Cable

Selected sizes:


Reel & motion:
- Reel type: 
- Drum core diameter (mm): 
- Cable length on drum (m): 
- Travel speed (m/min): 
- Max. acceleration: 
- Cycles per hour: 
- Length and quantity: 
- Ambient temperature: 
- Exposure (outdoor, water, oil, abrasion): 
- Destination country: 
- Equipment and operating conditions:

Send via WhatsApp