1 / 5

Product

subsea umbilical, ROV tether & oceanographic tow cable IEC 60092 / Dynamic Reeling0.6/1 kV – 3.6 kV (-40 to +85 °C)PUR / SHF2 Heavy Reeling Outer Jacke

0.6/1–3.6 kV Dynamic Subsea Winch, A-Frame & Knuckle-Boom Crane Reeling UmbilicalIEC 60092 / Dynamic Reeling — 0.6/1 kV – 3.6 kV — -40 to +85 °C Subsea & Offshore Cable

0.6/1–3.6 kV Dynamic Subsea Winch, A-Frame & Knuckle-Boom Crane Reeling Umbilical (IEC 60092 / Dynamic Reeling) engineered for 0.6/1 kV – 3.6 kV service across -40 to +85 °C (min. bend radius 8 × OD).

Water-resistant

EMC screen

Oil-resistant

Approved

Configuration

Order designation: Dynamic Subsea Reeling Config A
Outer Ø ≈: 32.0 mm
Net weight ≈: 1,850 kg/km
Tensile rating ≈: 85.0 kN
Core / stranding: Compacted / Class 5 Cu/SnCu + FO

All sizes (3)

Request a quote Datasheet WhatsApp info@tebaoflex.com

Engineering reply in 2 business hoursCut-to-length export drumsEN 10204 3.1 certificate per drum

Rated voltage: 0.6/1 kV – 3.6 k
Operating temp.: −40…+85 °C
Min. bend radius: 8 × OD
Core / conductor: Class 5/6 Flexib
Outer protection: PUR / SHF2 Heavy
Standard: IEC 60092 / Dyna

Typical values for this cable type, based on 0.6/1–3.6 kV Dynamic Subsea Winch & A-Frame Reeling Umbilical Specification (PUR / SHF2) — confirmed in the datasheet and quotation for your order.

Application fit

Is Dynamic Subsea Reeling right for your machine?

Immersion & wet locations

Suitable

Hydrolysis-resistant polyurethane (PUR) or HDPE jacket and water-blocked core withstand continuous deepwater hydrostatic immersion.

Vertical / spreader reel

Suitable

Torque-balanced contra-helical steel wire armour or high-modulus aramid strength member supports dynamic winch deployment without hockling

Trailing & towing

Suitable

Abrasion-resistant outer sheath and high working-load strength elements handle dynamic marine towing, buoy mooring and ROV excursion.

Offshore platform & shipboard deck trays

Suitable

UV-stabilised, oil- and seawater-resistant construction withstands A-frame sheaves, traction winches and open research-vessel decks.

Energy chain / drag chain

Not suitable

Subsea umbilical, ROV tether and towed array cables are not designed for indoor factory automation drag chains.

Use M23 Servo Assembly

Typical machinesUnderwater & Ocean ExplorationOceanographic CTD, ADCP & Deep-Tow SurveysWork-Class & Observation ROV / AUV SystemsSide-Scan Sonar, SAS & Towed Hydrophone ArraysMarine 2D/3D/UHR Seismic Streamers & OBC

Construction

Layer by layer

Shown: Dynamic Subsea Reeling (0.6/1–3.6 kV Dynamic Subsea Winch & A-Frame Reeling Umbilical Specification (PUR / SHF2)) featuring class 5/6 flexible tinned copper power cores, screened control pairs & optical unit and pur / shf2 heavy reeling outer jacket (4-layer construction).

Schematic, not to scale — generated from the layer data

#	Layer	Material & reference
1	Class 5/6 Flexible Tinned Copper Power C	High-flexibility tinned copper conductors with EPR/XLPE insulation
2	Screened Control Pairs & Optical Unit	Braided-shield control twisted pairs + central fiber-optic unit
3	Anti-Torsion Reinforcement Braid	Aramid or steel wire anti-torsion braid between inner & outer sheaths
4	PUR / SHF2 Heavy Reeling Outer Jacket	High-abrasion hydrolysis-resistant outer sheath for dynamic winches

Dynamic Subsea Reeling — Standard Subsea & Offshore Execution

Built to 0.6/1–3.6 kV Dynamic Subsea Winch & A-Frame Reeling Umbilical Specification (PUR / SHF2) with class 5/6 flexible tinned copper power cores and pur / shf2 heavy reeling outer jacket

Dynamic Subsea Reeling — Custom Continuous Winch / Reel Length

Available in custom continuous subsea winch, tow or seabed lengths with water-blocked terminations

Dynamic Subsea Reeling — Hydrostatic, Tensile & Routine Certified

Supplied with EN 10204 3.1 routine dielectric, optical OTDR / DC resistance & tensile test report

Technical data

Ratings & operating limits

Typical values: Typical values for this cable type, based on 0.6/1–3.6 kV Dynamic Subsea Winch & A-Frame Reeling Umbilical Specification (PUR / SHF2). Values for your order are confirmed in the datasheet and quotation.

Electrical

Rated voltage / transmission duty: 0.6/1 kV – 3.6 kV (0.6/1–3.6 kV Dynamic Subsea Winch & A-Frame Reeling Umbilical Specification (PUR / SHF2))
Core / conductor construction: Class 5/6 Flexible Tinned Copper Power Cores — High-flexibility tinned copper conductors with EPR/XLPE insulation
Primary dielectric / buffering: Screened Control Pairs & Optical Unit — Braided-shield control twisted pairs + central fiber-optic unit

Thermal

Continuous operating temperature: −40…+85 °C (subsea & offshore duty)
Hydrostatic & thermal stability: Verified thermal and hydrostatic stability per 0.6/1–3.6 kV Dynamic Subsea Winch & A-Frame Reeling Umbilical Specification (PUR / SHF2)
Storage & transport temperature: −40…+80 °C on export wooden/steel winch reel

Mechanical

Outer protection / armouring: PUR / SHF2 Heavy Reeling Outer Jacket — High-abrasion hydrolysis-resistant outer sheath for dynamic winches
Minimum bending radius: 8 × OD
Armour, strength member & mechanical duty: Anti-Torsion Reinforcement Braid — Aramid or steel wire anti-torsion braid between inner & outer sheaths

Resistance

Seawater, hydrostatic & hydrolysis resistance: Engineered for continuous seawater immersion, pressure cycling and hydrolysis resistance per 0.6/1–3.6 kV Dynamic Subsea Winch & A-Frame Reeling Umbilical Specification (PUR / SHF2)
Oil, drilling mud & abrasion resistance: Resistant to marine hydraulic oils, salt mist, winch sheave wear and seabed abrasion per 0.6/1–3.6 kV Dynamic Subsea Winch & A-Frame Reeling Umbilical Specification (PUR / SHF2)
RoHS & REACH compliance: RoHS 2 (2011/65/EU + 2015/863) & REACH SVHC compliant

Reference standards

Governing standard: 0.6/1–3.6 kV Dynamic Subsea Winch & A-Frame Reeling Umbilical Specification (PUR / SHF2)
Environmental & test standards: IEC 60228 / IEC 60794 / ITU-T G.972 / IEEE 1580 / EN 10204
Quality management & inspection: ISO 9001:2015 & EN 10204 3.1 factory routine inspection

Identification

Model designation: Dynamic Subsea Reeling
Sheath colour & metre marking: Continuous metre-marked black outer finish (PUR / SHF2 Heavy)
Customs tariff (HS): 8544.49 / 8544.60 / 8544.70

Sizes

3 standard Dynamic Subsea Reeling subsea & offshore configurations

Manufactured to 0.6/1–3.6 kV Dynamic Subsea Winch & A-Frame Reeling Umbilical Specification (PUR / SHF2) for subsea, oceanographic, ROV, seismic and offshore applications.

Dimensions, tensile load & weights
Order designation	Configuration	Core / stranding	Outer Ø ≈ mm	Net weight ≈ kg/km	Breaking / tensile kN ≈	Min. bend R mm
Dynamic Subsea Reeling Construction Schedule (−40…+85 °C)
Dynamic Subsea Reeling Config A	3×25–50 mm² (or 3P+FO Composite)	Compacted / Class 5 Cu/SnCu + FO	32.0	1,850	85.0	380
Dynamic Subsea Reeling Config B	3×95–150 mm² (or Heavy EOM)	Compacted / Class 5 Cu/SnCu + FO	48.5	4,280	130.0	580
Dynamic Subsea Reeling Config C	3×240–400 mm² (or Trunk HV/MV)	Compacted Cu + Lead/Armour + FO	78.0	9,650	210.0	950

Typical values for this cable type; dimensions and weights for your order are confirmed in the quotation.
Custom core cross-sections, pair/fibre counts, armour breaking loads and continuous winch/seabed lengths available per 0.6/1–3.6 kV Dynamic Subsea Winch & A-Frame Reeling Umbilical Specification (PUR / SHF2).

Electrical, optical & thermal parameters
Configuration	Max. DC R₂₀ / Atten. Ω/km or dB/km	Rating / Impedance	Operating temp.
3×25–50 mm² (or 3P+FO Composite)	0.50	0.6/1 kV – 3.6 kV (Subsea/MV)	−40…+85 °C
3×95–150 mm² (or Heavy EOM)	0.19	0.6/1 kV – 3.6 kV (Subsea/MV)	−40…+85 °C
3×240–400 mm² (or Trunk HV/MV)	0.08	0.6/1 kV – 3.6 kV (Trunk/HV)	−40…+85 °C

Every production length undergoes routine conductor DC resistance, high-voltage dielectric or OTDR continuity and dimensional verification.

Quality & approvals

Testing & inspection

Routine tests on every production length, sample and type tests per batch — documented on an EN 10204 3.1 inspection certificate.

ConductorClass 5 stranding
Spark test100 % in-line
Lay-upCores, earth, fillers
SheathingInner, braid / screen, outer
Electrical testsAC voltage, resistance
DimensionsOD, wall thickness
Inspection documents & dispatchDrum & dispatch

Testing & inspection	Test value / reference	Frequency
Routine tests
Conductor resistance, optical OTDR continuity & dimensional verification (0.6/1–3.6 kV Dynamic Subsea Winch & A-Frame Reeling Umbilical Specification (PUR / SHF2))	DC resistance at 20 °C / optical attenuation and outer diameter within 0.6/1–3.6 kV Dynamic Subsea Winch & A-Frame Reeling Umbilical Specification (PUR / SHF2) tolerances	Every manufactured drum length
High-voltage dielectric & insulation resistance test (0.6/1–3.6 kV Dynamic Subsea Winch & A-Frame Reeling Umbilical Specification (PUR / SHF2))	Zero dielectric breakdown and verified insulation resistance for 0.6/1 kV – 3.6 kV rating	Every manufactured drum length
Sample tests
Hydrostatic pressure, tensile breaking load & water-blocking qualification (0.6/1–3.6 kV Dynamic Subsea Winch & A-Frame Reeling Umbilical Specification (PUR / SHF2))	Verified subsea pressure integrity, torque-balanced tensile performance and thermal stability across −40…+85 °C	Type qualification & periodic lot audit

Inspection certificate

Issued with every drum, listing the routine test results for that length.

Product approvals

IEC 60092 / Dynamic Reeling CompliantEN 10204 3.1 Factory Test CertificateCE, RoHS 2 (2011/65/EU) & REACH

Company certificates

ISO 9001ISO 14001ISO 45001VDE marks approvalUL / cULCE · LVD / EMC

Marking & supply

Ordering & delivery

Sheath marking

TEBAOFLEX Dynamic Subsea Reeling IEC 60092 / Dynamic Reeling 0.6/1 kV – 3.6 kV CE

Delivery form: Heavy-duty export fumigated wooden drums, steel oceanographic winch reels or submarine turntables
Standard lengths: 500 m, 1,000 m, 3,000 m, 6,000 m or custom continuous subsea lengths
MOQ: 100 m (standard configurations) · 500 m (custom subsea builds)
Lead time: 2–6 weeks ex-works
Incoterms: EXW, FCA, FOB, CIF, DAP

Technical documents

Downloads

PDF0.6/1–3.6 kV Dynamic Subsea Winch, A-Frame & Knuckle-Boom Crane Reelin – technical datasheet3 sizes · construction, technical data, approvals XLSXDynamic Subsea Reeling spec data (Excel)All 3 sizes with dimensions and data, for your BOM or quotation

Revision: 2026-10-26
Updated: 2026-10-26

FAQ

Questions engineers ask first

Not covered here? Send your drawing — an engineer replies within 2 business hours.

What governing standard and construction define Dynamic Subsea Reeling (0.6/1–3.6 kV Dynamic Subsea Winch, A-Frame & Knuckle-Boom Crane Reeling Umbilical)?

Dynamic Subsea Reeling (0.6/1–3.6 kV Dynamic Subsea Winch, A-Frame & Knuckle-Boom Crane Reeling Umbilical) is manufactured in accordance with 0.6/1–3.6 kV Dynamic Subsea Winch & A-Frame Reeling Umbilical Specification (PUR / SHF2) for 0.6/1 kV – 3.6 kV service over -40 to +85 °C. Its 4-layer construction comprises class 5/6 flexible tinned copper power cores, screened control pairs & optical unit and pur / shf2 heavy reeling outer jacket.

What is the minimum bending radius and operating temperature range for Dynamic Subsea Reeling?

The minimum bending radius for Dynamic Subsea Reeling is 8 × OD across its continuous operating temperature range of -40 to +85 °C, ensuring mechanical, hydrostatic and dielectric reliability in subsea and offshore service.

How are the concentric layers of Dynamic Subsea Reeling arranged from inside to outside?

From inside to outside, the construction sequence is: (01) Class 5/6 Flexible Tinned Copper Power Cores — High-flexibility tinned copper conductors with EPR/XLPE insulation; (02) Screened Control Pairs & Optical Unit — Braided-shield control twisted pairs + central fiber-optic unit; (03) Anti-Torsion Reinforcement Braid — Aramid or steel wire anti-torsion braid between inner & outer sheaths; (04) PUR / SHF2 Heavy Reeling Outer Jacket — High-abrasion hydrolysis-resistant outer sheath for dynamic winches.

What factory test certificates are supplied with Dynamic Subsea Reeling?

Every production drum of Dynamic Subsea Reeling undergoes routine conductor resistance/OTDR continuity, high-voltage dielectric and dimensional testing per 0.6/1–3.6 kV Dynamic Subsea Winch & A-Frame Reeling Umbilical Specification (PUR / SHF2), and is delivered with an EN 10204 3.1 factory test certificate.

Request a quote

Get an engineering quote for Dynamic Subsea Reeling

Your selection and application details are copied into the enquiry form below.

01Selected sizes

Use + Add next to a size or configuration.

02Reel & motion

Add your operating conditions here to include them in your enquiry.

Reel typeDrum core diameter (mm)Cable length on drum (m)Travel speed (m/min)Max. accelerationCycles per hourLength and quantityAmbient temperatureExposure (outdoor, water, oil, abrasion)Destination countryEquipment and operating conditions

03Message for our engineers

0.6/1–3.6 kV Dynamic Subsea Winch, A-Frame & Knuckle-Boom Crane Reeling Umbilical

Selected sizes:


Reel & motion:
- Reel type: 
- Drum core diameter (mm): 
- Cable length on drum (m): 
- Travel speed (m/min): 
- Max. acceleration: 
- Cycles per hour: 
- Length and quantity: 
- Ambient temperature: 
- Exposure (outdoor, water, oil, abrasion): 
- Destination country: 
- Equipment and operating conditions:

Send via WhatsApp