1 / 5

Product

Aramid-reinforced halogen-free PUR mining reeling cable DIN VDE 0250 / IEC 607540.6/1 kV XLPE / PURCentral Aramid Core

D2X11Y 0.6/1 kV Aramid-Reinforced PUR Mining Reeling CableD2X11Y 0.6/1 kV halogen-free polyurethane reeling and trailing cable for underground mining LHD loaders, drill rigs and shuttle cars, featuring a central aramid tensile core, 90 °C XLPE (2X) cores, inner PUR bedding and yellow 11Y PUR jacket.

Engineered for underground mining, open-cast excavation, shaft infrastructure and heavy industrial service per DIN VDE 0250 / IEC 60754-1 / IEC 60332-1-2 across -40 to +90 °C.

Anti-torsion braid

Oil-resistant

Flame-retardant

Outdoor & humid

Configuration

Order designation: D2X11Y 3×35 + 3×6G + 2×1.5P
Outer Ø ≈: 31.6 mm
Net weight ≈: 1,760 kg/km
Tensile rating ≈: 24.0 kN
Core / stranding: Class 5 plain Cu + Aramid

All sizes (3)

Request a quote Datasheet WhatsApp info@tebaoflex.com

Engineering reply in 2 business hoursCut-to-length export drumsEN 10204 3.1 certificate per drum

Rated voltage: 0.6/1 kV
Operating temp.: -40 to +90 °C
Min. bend radius: 8 × OD
Core / conductor: 3×25–95+3G+2P
Outer protection: 11Y Yellow PUR
Standard: VDE 0250 / 11Y

Typical values for this cable type, based on DIN VDE 0250 / IEC 60754-1 / IEC 60332-1-2 — confirmed in the datasheet and quotation for your order.

Application fit

Is D2X11Y right for your machine?

Engineered for underground mining, open-cast excavation, shaft infrastructure and heavy industrial service per DIN VDE 0250 / IEC 60754-1 / IEC 60332-1-2 across -40 to +90 °C.

Motorised monospiral reel

Suitable

Engineered for horizontal and mobile drum reeling duty per DIN VDE 0250 / IEC 60754-1 / IEC 60332-1-2 within 8 × OD.

Trailing & towing

Suitable

Suitable for mobile mining loader, shuttle car and excavator trailing service across -40 to +90 °C.

Mine roadway & tunnel wall hangers

Suitable

Verified for underground mining galleries, tunnel faces and open-cast haulage paths.

Festoon & line chain

Not suitable

Not optimized for high-speed overhead crane C-track festoon loops; select a dedicated festoon cable.

NGFLGÖU Flat Rubber Festoon Cable

Typical machinesMining & TunnellingUnderground Coal & Hard-Rock MiningOpen-Cast Excavators, Draglines & ShovelsVertical Mine Shafts, Hoists & BoreholesTunneling, Mineral Processing & Slurry Plants

Construction

Layer by layer

Shown: D2X11Y (DIN VDE 0250 / IEC 60754-1 / IEC 60332-1-2) featuring central aramid core, phase conductors (3×35 mm²) and outer sheath (11y halogen-free pur) (5-layer construction).

Schematic, not to scale — generated from the layer data

#	Layer	Material & reference
1	Central Aramid Core	Polymer-sheathed high-modulus aramid fibre strain-relief core (20–25 N/mm²)
2	Phase Conductors (3×35 mm²)	IEC 60228 Class 5 flexible plain copper with Black, Brown & Grey XLPE (2X)
3	Split Earth & Pilot Cores	3 × 6 mm² Green/Yellow XLPE earth cores + 2 × 1.5 mm² White/Blue XLPE pilots
4	Inner Polyurethane Sheath	Extruded high-elasticity special PUR inner bedding locking core geometry
5	Outer Sheath (11Y Halogen-Free PUR)	Dull yellow rock-cut, oil- and abrasion-resistant halogen-free PUR jacket

D2X11Y — Standard Mining Execution

Built to DIN VDE 0250 / IEC 60754-1 / IEC 60332-1-2 with central aramid core and outer sheath (11y halogen-free pur)

D2X11Y — Custom Drum Length & Gland Kit

Available in custom shaft/roadway drum lengths or pre-terminated assemblies

D2X11Y — Routine & Flame Test Certified

Supplied with EN 10204 3.1 routine dielectric, resistance & flame test report

Technical data

Ratings & operating limits

Typical values: Typical values for this cable type, based on DIN VDE 0250 / IEC 60754-1 / IEC 60332-1-2. Values for your order are confirmed in the datasheet and quotation.

Electrical

Rated voltage / transmission duty: 0.6/1 kV (DIN VDE 0250 / IEC 60754-1 / IEC 60332-1-2)
Core / conductor construction: Central Aramid Core — Polymer-sheathed high-modulus aramid fibre strain-relief core (20–25 N/mm²)
Primary dielectric / buffering: Phase Conductors (3×35 mm²) — IEC 60228 Class 5 flexible plain copper with Black, Brown & Grey XLPE (2X)

Thermal

Continuous operating temperature: -40 to +90 °C (mining & industrial service)
Short-circuit / peak thermal rating: Verified thermal stability per DIN VDE 0250 / IEC 60754-1 / IEC 60332-1-2
Storage & transport temperature: −40…+80 °C on export wooden/steel drum

Mechanical

Outer protection / armouring: Outer Sheath (11Y Halogen-Free PUR) — Dull yellow rock-cut, oil- and abrasion-resistant halogen-free PUR jacket
Minimum bending radius: 8 × OD
Crush, impact & abrasion duty: Heavy-duty mining rock-cut, impact and tensile protection per DIN VDE 0250 / IEC 60754-1 / IEC 60332-1-2

Resistance

Flame retardancy & mine fire safety: Self-extinguishing / flame-retardant mining jacket per DIN VDE 0250 / IEC 60754-1 / IEC 60332-1-2
Mine water, oil & chemical resistance: Resistant to acidic mine water, hydraulic oils and abrasion per DIN VDE 0250 / IEC 60754-1 / IEC 60332-1-2
RoHS & REACH compliance: RoHS 2 (2011/65/EU + 2015/863) & REACH SVHC compliant

Reference standards

Governing standard: DIN VDE 0250 / IEC 60754-1 / IEC 60332-1-2
Flame & environmental test standards: IEC 60332 / MSHA / EN 60794 / IEC 60228
Quality management & inspection: ISO 9001:2015 & EN 10204 3.1 factory routine inspection

Identification

Model designation: D2X11Y
Sheath colour & metre marking: Continuous metre-marked yellow mining outer sheath
Customs tariff (HS): 8544.49 / 8544.60 / 8544.70

Sizes

3 standard D2X11Y mining & industrial configurations

Manufactured to DIN VDE 0250 / IEC 60754-1 / IEC 60332-1-2 for underground mining, open-cast excavation, shaft and heavy industrial systems.

Dimensions, tensile load & weights
Order designation	Configuration	Core / stranding	Outer Ø ≈ mm	Net weight ≈ kg/km	Tensile rating kN ≈	Min. bend R mm
D2X11Y Construction Schedule (-40 to +90 °C)
D2X11Y 3×25 + 3×6G + 2×1.5P	3×25 + 3×6 (G) + 2×1.5 (P)	Class 5 plain Cu + Aramid	28.4	1,380	18.5	230
D2X11Y 3×35 + 3×6G + 2×1.5P	3×35 + 3×6 (G) + 2×1.5 (P)	Class 5 plain Cu + Aramid	31.6	1,760	24.0	255
D2X11Y 3×50 + 3×10G + 2×1.5P	3×50 + 3×10 (G) + 2×1.5 (P)	Class 5 plain Cu + Aramid	36.2	2,440	32.5	290

Typical values for this cable type; dimensions and weights for your order are confirmed in the quotation.
Custom core cross-sections, pair/fibre counts, armour grades and factory drum lengths available per DIN VDE 0250 / IEC 60754-1 / IEC 60332-1-2.

Electrical, optical & thermal parameters
Configuration	Max. DC R₂₀ / Atten. Ω/km or dB/km	Rating / Impedance	Operating temp.
3×25 + 3×6 (G) + 2×1.5 (P)	0.78	0.6/1 kV (131 A)	-40 to +90 °C
3×35 + 3×6 (G) + 2×1.5 (P)	0.55	0.6/1 kV (162 A)	-40 to +90 °C
3×50 + 3×10 (G) + 2×1.5 (P)	0.39	0.6/1 kV (202 A)	-40 to +90 °C

Every production length undergoes routine conductor DC resistance, high-voltage Spark/AC dielectric or OTDR continuity and dimensional verification.

Quality & approvals

Testing & inspection

Routine tests on every production length, sample and type tests per batch — documented on an EN 10204 3.1 inspection certificate.

ConductorClass 5 stranding
Spark test100 % in-line
Lay-upCores, earth, fillers
SheathingInner, braid / screen, outer
Electrical testsAC voltage, resistance
DimensionsOD, wall thickness
Inspection documents & dispatchDrum & dispatch

Testing & inspection	Test value / reference	Frequency
Routine tests
Conductor resistance, continuity & dimensional verification (DIN VDE 0250 / IEC 60754-1 / IEC 60332-1-2)	DC resistance at 20 °C / optical attenuation and outer diameter within DIN VDE 0250 / IEC 60754-1 / IEC 60332-1-2 tolerances	Every manufactured drum length
High-voltage dielectric & insulation resistance test (DIN VDE 0250 / IEC 60754-1 / IEC 60332-1-2)	Zero dielectric breakdown and verified insulation resistance over full production length	Every manufactured drum length
Sample tests
Flame propagation, mechanical crush & thermal ageing qualification (DIN VDE 0250 / IEC 60754-1 / IEC 60332-1-2)	Verified flame retardancy, mechanical integrity and thermal endurance across -40 to +90 °C	Type qualification & periodic lot audit

Inspection certificate

Issued with every drum, listing the routine test results for that length.

Product approvals

VDE 0250 / 11Y CompliantEN 10204 3.1 Factory Test CertificateCE, RoHS 2 (2011/65/EU) & REACH

Company certificates

ISO 9001ISO 14001ISO 45001VDE marks approvalUL / cULCE · LVD / EMC

Marking & supply

Ordering & delivery

Sheath marking

TEBAOFLEX D2X11Y VDE 0250 / 11Y 0.6/1 kV CE

Delivery form: Heavy-duty export fumigated wooden drums or steel mine reels
Standard lengths: 500 m, 1,000 m or custom continuous shaft/reeling lengths
MOQ: 100 m (standard configurations) · 500 m (custom builds)
Lead time: 2–5 weeks ex-works
Incoterms: EXW, FCA, FOB, CIF, DAP

Technical documents

Downloads

PDFD2X11Y 0.6/1 kV Aramid-Reinforced PUR Mining Reeling Cable – technical datasheet3 sizes · construction, technical data, approvals XLSXD2X11Y spec data (Excel)All 3 sizes with dimensions and data, for your BOM or quotation

Revision: 2026-10-24
Updated: 2026-10-24

FAQ

Questions engineers ask first

Not covered here? Send your drawing — an engineer replies within 2 business hours.

What governing standard and construction define D2X11Y (D2X11Y 0.6/1 kV Aramid-Reinforced PUR Mining Reeling Cable)?

D2X11Y (D2X11Y 0.6/1 kV Aramid-Reinforced PUR Mining Reeling Cable) is manufactured in accordance with DIN VDE 0250 / IEC 60754-1 / IEC 60332-1-2 for 0.6/1 kV duty over -40 to +90 °C. Its 5-layer construction comprises Central Aramid Core, Phase Conductors (3×35 mm²) and Outer Sheath (11Y Halogen-Free PUR).

What is the minimum bending radius and operating temperature range for D2X11Y?

The minimum bending radius for D2X11Y is 8 × OD across its continuous operating temperature range of -40 to +90 °C, ensuring mechanical and dielectric reliability in mining and heavy industrial service.

How are the concentric layers of D2X11Y arranged from inside to outside?

From inside to outside, the construction sequence is: (01) Central Aramid Core (Polymer-sheathed high-modulus aramid fibre strain-relief core (20–25 N/mm²)); (02) Phase Conductors (3×35 mm²) (IEC 60228 Class 5 flexible plain copper with Black, Brown & Grey XLPE (2X)); (03) Split Earth & Pilot Cores (3 × 6 mm² Green/Yellow XLPE earth cores + 2 × 1.5 mm² White/Blue XLPE pilots); (04) Inner Polyurethane Sheath (Extruded high-elasticity special PUR inner bedding locking core geometry); (05) Outer Sheath (11Y Halogen-Free PUR) (Dull yellow rock-cut, oil- and abrasion-resistant halogen-free PUR jacket).

What factory test certificates are supplied with D2X11Y?

Every production drum of D2X11Y undergoes routine conductor resistance/continuity, high-voltage dielectric and dimensional testing per DIN VDE 0250 / IEC 60754-1 / IEC 60332-1-2, and is delivered with an EN 10204 3.1 factory test certificate.

Request a quote

Get an engineering quote for D2X11Y

Your selection and application details are copied into the enquiry form below.

01Selected sizes

Use + Add next to a size or configuration.

02Reel & motion

Add your operating conditions here to include them in your enquiry.

Reel typeDrum core diameter (mm)Cable length on drum (m)Travel speed (m/min)Max. accelerationCycles per hourLength and quantityAmbient temperatureExposure (outdoor, water, oil, abrasion)Destination countryEquipment and operating conditions

03Message for our engineers

D2X11Y 0.6/1 kV Aramid-Reinforced PUR Mining Reeling Cable

Selected sizes:


Reel & motion:
- Reel type: 
- Drum core diameter (mm): 
- Cable length on drum (m): 
- Travel speed (m/min): 
- Max. acceleration: 
- Cycles per hour: 
- Length and quantity: 
- Ambient temperature: 
- Exposure (outdoor, water, oil, abrasion): 
- Destination country: 
- Equipment and operating conditions:

Send via WhatsApp