1 / 5

Product

600 m XLPE/rubber potable-water round, flat & EMV screened cable ACS / KTW / WRAS / DM1740.6/1 kV (AD8 600 m)Round, Flat & EMV Screened

CLEAN CABLE & CLEAN CABLE EMV 0.6/1 kV 600m Potable-Water Pump CableACS / KTW / WRAS / DM174 · 0.6/1 kV · 600 m xlpe/rubber potable-water round, flat &

CLEAN CABLE (Round / Flat) & CLEAN CABLE EMV (Screened Round) 0.6/1 kV XLPE-Insulated Cross-Linked Rubber Sheathed Potable Water Submersible Pump Cable (ACS / KTW / WRAS / DM174, 0.6/1 kV, -40 °C to +90 °C, min. bend radius 6 × OD).

Water-resistant

EMC screen

Low-EMC design

Approved

Configuration

Order designation: CLEAN CABLE 4G16 mm²
Outer Ø ≈: 21.8 mm
Net weight ≈: 840 kg/km
Tensile rating ≈: 2.4 kN
Core / stranding: IEC 60228 Class 5 flexible Cu/SnCu

All sizes (3)

Request a quote Datasheet WhatsApp info@tebaoflex.com

Engineering reply in 2 business hoursCut-to-length export drumsEN 10204 3.1 certificate per drum

Rated voltage: 0.6/1 kV
Operating temp.: −40…+90 °C
Min. bend radius: 6 × OD
Core / conductor: 3G–4G 1.5–150
Outer protection: RAL 5015
Standard: ACS / KTW / WRAS

Typical values for this cable type, based on CEI EN 60228 / ACS, KTW/W270, WRAS & DM 174 Potable Rubber — confirmed in the datasheet and quotation for your order.

Application fit

Is CLEAN CABLE / CLEAN CABLE EMV right for your machine?

Immersion & wet locations

Suitable

Cross-linked submersible elastomer compound is qualified for continuous deep-well, potable-water or sewage immersion.

Free-hanging vertical run

Suitable

High-modulus conductor and elastomer construction supports vertical suspension in deep boreholes and pump risers.

Trailing & towing

Suitable

Tear- and abrasion-resistant rubber outer sheath handles mobile dewatering, dredger and portable pump deployment.

Fixed installation

Suitable

Suitable for permanent wet-well, treatment tank, geothermal borehole and submergedmanifold installations.

Energy chain / drag chain

Not suitable

Submersible rubber pump cable is not intended for high-acceleration automation drag chains.

Use Drag-Chain Control Cable

Typical machinesDeep-Well Potable Water PumpingMunicipal Sewage & Wastewater PlantsMine Dewatering & Slurry DredgingGeothermal, Spa & Pool Installations

Construction

Layer by layer

Shown: CLEAN CABLE / CLEAN CABLE EMV (CEI EN 60228 / ACS, KTW/W270, WRAS & DM 174 Potable Rubber) featuring class 5 bare copper conductors (4g1.5–50), high-insulation xlpe dielectric (>200 mω·km) and ral 5015 sky-blue cross-linked rubber sheath (4-layer construction).

Schematic, not to scale — generated from the layer data

#	Layer	Material & reference
1	Class 5 Bare Copper Conductors (4G1.5–50)	CEI EN 60228 Class 5 flexible annealed bare copper conductors
2	High-Insulation XLPE Dielectric (>200 MΩ·km)	Low-capacitance cross-linked polyethylene insulation (Brown, Black, Grey & G/Y)
3	Overall Tinned Copper Braid (EMV, ≥85%)	High-coverage tinned copper wire braid for VFD inverter EMC & bearing protection
4	RAL 5015 Sky-Blue Cross-Linked Rubber Sheath	Food-grade rubber jacket (≤0.5% halogen; ACS, KTW/W270, WRAS & DM 174 certified)

CLEAN CABLE / CLEAN CABLE EMV — Standard Subsea & Marine Execution

Built to CEI EN 60228 / ACS, KTW/W270, WRAS & DM 174 Potable Rubber with class 5 bare copper conductors (4g1.5–50) and ral 5015 sky-blue cross-linked rubber sheath

CLEAN CABLE / CLEAN CABLE EMV — Custom Drum Length & Termination Kit

Available in custom continuous subsea/wellbore drum lengths or pre-terminated assemblies

CLEAN CABLE / CLEAN CABLE EMV — Routine & Hydrostatic Test Certified

Supplied with EN 10204 3.1 routine dielectric, resistance & pressure/dimensional report

Technical data

Ratings & operating limits

Typical values: Typical values for this cable type, based on CEI EN 60228 / ACS, KTW/W270, WRAS & DM 174 Potable Rubber. Values for your order are confirmed in the datasheet and quotation.

Electrical

Rated voltage / transmission duty: 0.6/1 kV (CEI EN 60228 / ACS, KTW/W270, WRAS & DM 174 Potable Rubber)
Core / conductor construction: Class 5 Bare Copper Conductors (4G1.5–50) — CEI EN 60228 Class 5 flexible annealed bare copper conductors
Primary dielectric / buffering: High-Insulation XLPE Dielectric (>200 MΩ·km) — Low-capacitance cross-linked polyethylene insulation (Brown, Black, Grey & G/Y)

Thermal

Continuous operating temperature: −40…+90 °C (subsea, marine & submersible duty)
Short-circuit / peak thermal rating: Verified thermal stability per CEI EN 60228 / ACS, KTW/W270, WRAS & DM 174 Potable Rubber
Storage & transport temperature: −40…+80 °C on export wooden/steel drum

Mechanical

Outer protection / armouring: RAL 5015 Sky-Blue Cross-Linked Rubber Sheath — Food-grade rubber jacket (≤0.5% halogen; ACS, KTW/W270, WRAS & DM 174 certified)
Minimum bending radius: 6 × OD
Hydrostatic, tensile & crush duty: Overall Tinned Copper Braid (EMV, ≥85%) — High-coverage tinned copper wire braid for VFD inverter EMC & bearing protection

Resistance

Hydrostatic pressure & water blocking: Engineered for continuous submersion and hydrostatic integrity per CEI EN 60228 / ACS, KTW/W270, WRAS & DM 174 Potable Rubber
Seawater, oil & chemical resistance: Resistant to seawater hydrolysis, hydraulic oils and abrasion per CEI EN 60228 / ACS, KTW/W270, WRAS & DM 174 Potable Rubber
RoHS & REACH compliance: RoHS 2 (2011/65/EU + 2015/863) & REACH SVHC compliant

Reference standards

Governing standard: CEI EN 60228 / ACS, KTW/W270, WRAS & DM 174 Potable Rubber
Environmental & test standards: IEC 60228 / IEC 60332 / ISO 13628-5 / EN 10204
Quality management & inspection: ISO 9001:2015 & EN 10204 3.1 factory routine inspection

Identification

Model designation: CLEAN CABLE / CLEAN CABLE EMV
Sheath colour & metre marking: Continuous metre-marked blue outer finish (RAL 5015 Sky-Blue Rubber)
Customs tariff (HS): 8544.49 / 8544.60 / 8544.70

Sizes

3 standard CLEAN CABLE / CLEAN CABLE EMV subsea & marine configurations

Manufactured to CEI EN 60228 / ACS, KTW/W270, WRAS & DM 174 Potable Rubber for subsea, offshore, deep-well and marine applications.

Dimensions, tensile load & weights
Order designation	Configuration	Core / stranding	Outer Ø ≈ mm	Net weight ≈ kg/km	Tensile rating kN ≈	Min. bend R mm
CLEAN CABLE / CLEAN CABLE EMV Construction Schedule (−40…+90 °C)
CLEAN CABLE 4G16 mm²	4G16 mm² (3×16 + 1G16)	IEC 60228 Class 5 flexible Cu/SnCu	21.8	840	2.4	130
CLEAN CABLE 4G35 mm²	4G35 mm² (3×35 + 1G16)	IEC 60228 Class 5 flexible Cu/SnCu	28.6	1,620	5.2	172
CLEAN CABLE 3×70 + 3G16 mm²	3 × 70 mm² + 3G16 mm²	IEC 60228 Class 5 flexible Cu/SnCu	38.4	3,180	10.5	230

Typical values for this cable type; dimensions and weights for your order are confirmed in the quotation.
Custom core cross-sections, pair/fibre counts, armour grades and factory drum lengths available per CEI EN 60228 / ACS, KTW/W270, WRAS & DM 174 Potable Rubber.

Electrical, optical & thermal parameters
Configuration	Max. DC R₂₀ / Atten. Ω/km or dB/km	Rating / Impedance	Operating temp.
4G16 mm² (3×16 + 1G16)	1.21	0.6/1 kV (94 A submerged)	−40…+90 °C
4G35 mm² (3×35 + 1G16)	0.55	0.6/1 kV (152 A submerged)	−40…+90 °C
3 × 70 mm² + 3G16 mm²	0.27	0.6/1 kV (235 A submerged)	−40…+90 °C

Every production length undergoes routine conductor DC resistance, high-voltage dielectric or OTDR continuity and dimensional verification.

Quality & approvals

Testing & inspection

Routine tests on every production length, sample and type tests per batch — documented on an EN 10204 3.1 inspection certificate.

ConductorClass 5 stranding
Spark test100 % in-line
Lay-upCores, earth, fillers
SheathingInner, braid / screen, outer
Electrical testsAC voltage, resistance
DimensionsOD, wall thickness
Inspection documents & dispatchDrum & dispatch

Testing & inspection	Test value / reference	Frequency
Routine tests
Conductor resistance, continuity & dimensional verification (CEI EN 60228 / ACS, KTW/W270, WRAS & DM 174 Potable Rubber)	DC resistance at 20 °C / optical attenuation and outer diameter within CEI EN 60228 / ACS, KTW/W270, WRAS & DM 174 Potable Rubber tolerances	Every manufactured drum length
High-voltage dielectric & insulation resistance test (CEI EN 60228 / ACS, KTW/W270, WRAS & DM 174 Potable Rubber)	Zero dielectric breakdown and verified insulation resistance for 0.6/1 kV rating	Every manufactured drum length
Sample tests
Hydrostatic pressure, water-blocking & mechanical endurance qualification (CEI EN 60228 / ACS, KTW/W270, WRAS & DM 174 Potable Rubber)	Verified submersion integrity, tensile load and thermal stability across −40…+90 °C	Type qualification & periodic lot audit

Inspection certificate

Issued with every drum, listing the routine test results for that length.

Product approvals

ACS / KTW / WRAS / DM174 CompliantEN 10204 3.1 Factory Test CertificateCE, RoHS 2 (2011/65/EU) & REACH

Company certificates

ISO 9001ISO 14001ISO 45001VDE marks approvalUL / cULCE · LVD / EMC

Marking & supply

Ordering & delivery

Sheath marking

TEBAOFLEX CLEAN CABLE / CLEAN CABLE EMV ACS / KTW / WRAS / DM174 0.6/1 kV CE

Delivery form: Heavy-duty export fumigated wooden drums or steel subsea reels
Standard lengths: 500 m, 1,000 m or custom continuous subsea/wellbore lengths
MOQ: 100 m (standard configurations) · 500 m (custom builds)
Lead time: 2–5 weeks ex-works
Incoterms: EXW, FCA, FOB, CIF, DAP

Technical documents

Downloads

PDFCLEAN CABLE & CLEAN CABLE EMV 0.6/1 kV 600m Potable-Water Pump Cable – technical datasheet3 sizes · construction, technical data, approvals XLSXCLEAN CABLE / CLEAN CABLE EMV spec data (Excel)All 3 sizes with dimensions and data, for your BOM or quotation

Revision: 2026-10-25
Updated: 2026-10-25

FAQ

Questions engineers ask first

Not covered here? Send your drawing — an engineer replies within 2 business hours.

What governing standard and construction define CLEAN CABLE / CLEAN CABLE EMV (CLEAN CABLE & CLEAN CABLE EMV 0.6/1 kV 600m Potable-Water Pump Cable)?

CLEAN CABLE / CLEAN CABLE EMV (CLEAN CABLE & CLEAN CABLE EMV 0.6/1 kV 600m Potable-Water Pump Cable) is manufactured in accordance with CEI EN 60228 / ACS, KTW/W270, WRAS & DM 174 Potable Rubber for 0.6/1 kV service over -40 °C to +90 °C. Its 4-layer construction comprises class 5 bare copper conductors (4g1.5–50), high-insulation xlpe dielectric (>200 mω·km) and ral 5015 sky-blue cross-linked rubber sheath.

What is the minimum bending radius and operating temperature range for CLEAN CABLE / CLEAN CABLE EMV?

The minimum bending radius for CLEAN CABLE / CLEAN CABLE EMV is 6 × OD across its continuous operating temperature range of -40 °C to +90 °C, ensuring mechanical and dielectric reliability in subsea, marine and submersible service.

How are the concentric layers of CLEAN CABLE / CLEAN CABLE EMV arranged from inside to outside?

From inside to outside, the construction sequence is: (01) Class 5 Bare Copper Conductors (4G1.5–50) — CEI EN 60228 Class 5 flexible annealed bare copper conductors; (02) High-Insulation XLPE Dielectric (>200 MΩ·km) — Low-capacitance cross-linked polyethylene insulation (Brown, Black, Grey & G/Y); (03) Overall Tinned Copper Braid (EMV, ≥85%) — High-coverage tinned copper wire braid for VFD inverter EMC & bearing protection; (04) RAL 5015 Sky-Blue Cross-Linked Rubber Sheath — Food-grade rubber jacket (≤0.5% halogen; ACS, KTW/W270, WRAS & DM 174 certified).

What factory test certificates are supplied with CLEAN CABLE / CLEAN CABLE EMV?

Every production drum of CLEAN CABLE / CLEAN CABLE EMV undergoes routine conductor resistance/continuity, high-voltage dielectric and dimensional testing per CEI EN 60228 / ACS, KTW/W270, WRAS & DM 174 Potable Rubber, and is delivered with an EN 10204 3.1 factory test certificate.

Request a quote

Get an engineering quote for CLEAN CABLE / CLEAN CABLE EMV

Your selection and application details are copied into the enquiry form below.

01Selected sizes

Use + Add next to a size or configuration.

02Reel & motion

Add your operating conditions here to include them in your enquiry.

Reel typeDrum core diameter (mm)Cable length on drum (m)Travel speed (m/min)Max. accelerationCycles per hourLength and quantityAmbient temperatureExposure (outdoor, water, oil, abrasion)Destination countryEquipment and operating conditions

03Message for our engineers

CLEAN CABLE & CLEAN CABLE EMV 0.6/1 kV 600m Potable-Water Pump Cable

Selected sizes:


Reel & motion:
- Reel type: 
- Drum core diameter (mm): 
- Cable length on drum (m): 
- Travel speed (m/min): 
- Max. acceleration: 
- Cycles per hour: 
- Length and quantity: 
- Ambient temperature: 
- Exposure (outdoor, water, oil, abrasion): 
- Destination country: 
- Equipment and operating conditions:

Send via WhatsApp