1 / 5

Product

FRP-rod dielectric-armoured PUR reeling fibre cable All-Dielectric FOFRP Rod Armour (QG)Orange PUR Reeling

ZW-(QG)GNOTKSdD FRP-Armoured PUR Reeling Fibre CableIEC 60794-2 / VDE 0888 · All-Dielectric · -40 °C to +80 °C FRP-armoured reeling optical cable

Anti-torsion braid

Oil-resistant

Water-resistant

Outdoor & humid

Configuration

Order designation: ZW-(QG)GNOTKSdD 8J (8×Ø 0.9 mm FO)
Outer Ø ≈: 17.8 mm
Weight ≈: 285 kg/km
Tensile load ≈: 7.5 kN
Core / stranding: Central module + FRP rods + PUR

All sizes (4)

Request a quote Datasheet WhatsApp info@tebaoflex.com

Engineering reply in 2 business hoursCut-to-length export drumsEN 10204 3.1 certificate per drum

Rated voltage: Optical Fibre
Operating temp.: −40…+80 °C
Min. bend radius: 12–15 × OD
Core / conductor: 4–24 × Ø 0.9 FO
Outer protection: Orange PUR + FRP
Standard: IEC 60794-2

Typical values for this cable type, based on IEC 60794-2 / ITU-T G.657.A2 — confirmed in the datasheet and quotation for your order.

Application fit

Is ZW-(QG)GNOTKSdD right for your machine?

Motorised monospiral reel

Suitable

Multilayer elastomeric bedding, aramid braid and orange PUR jacket endure deployable reeling and drum recovery.

Mine roadway & tunnel wall hangers

Suitable

Helical ring of Ø 1.0 mm FRP rods (QG) delivers rodent and rock-crush protection with zero metallic spark hazard.

Trailing & towing

Suitable

High-visibility 1.5 mm orange polyurethane outer sheath resists oil, hydrolysis, gravel abrasion and impact.

Energy chain / drag chain

With conditions

Suitable for large-radius heavy drag chains when minimum dynamic bend radius of 15 × OD is maintained.

Typical machinesMining & TunnellingUnderground Mine & Tunnel Gigabit Optical BackbonesMobile Reeling Drums, Crane Video & Lidar TelemetryHigh-Voltage Substation & Zero-Metal EMC LinksDeployable Tactical, Broadcast & Field Emergency Links

Construction

Layer by layer

Shown: ZW-(QG)GNOTKSdD (IEC 60794-2 / ITU-T G.657.A2) featuring central optical module (8j), frp dielectric armouring (qg) and outer reeling sheath (dd) (5-layer construction).

Schematic, not to scale — generated from the layer data

#	Layer	Material & reference
1	Central Optical Module (8J)	Eight Ø 0.9 mm tight-buffered optical fibres (8J, SM G.652.D / G.657.A or MM) reinforced with aramid yarns inside a yellow LSOH inner tubeIEC 60794-2 / ITU-T G.657.A2
2	FRP Dielectric Armouring (QG)	Helical ring of Ø 1.0 mm fibreglass-reinforced plastic (FRP) dielectric armour rods (QG) providing crush and radial impact protectionIEC 60794-2 / ITU-T G.657.A2
3	Inner Elastomeric Sheath	1.0 mm black thermoplastic rubber inner bedding sheath encapsulating the FRP rod armour layerIEC 60794-2 / ITU-T G.657.A2
4	Aramid Reinforcement & Mid Sheath	High-tenacity aramid yarn tensile braid followed by a 3.0 mm black thermoplastic rubber intermediate cushioning sheathIEC 60794-2 / ITU-T G.657.A2
5	Outer Reeling Sheath (dD)	1.5 mm high-visibility orange thermoplastic polyurethane (PUR, code dD) outer sheath (OD 19.6 mm) for heavy mining & port reeling drumsIEC 60794-2 / ITU-T G.657.A2

ZW-(QG)GNOTKSdD — Standard Execution

Built to IEC 60794-2 / ITU-T G.657.A2 with central optical module (8j) and outer reeling sheath (dd)

ZW-(QG)GNOTKSdD — Custom Length & Configuration

Available in custom drum lengths, core counts or factory-terminated assemblies

ZW-(QG)GNOTKSdD — Factory Routine Certified

Supplied with EN 10204 3.1 routine electrical, dielectric & dimensional inspection report

Technical data

Ratings & operating limits

Typical values: Typical values for this cable type, based on IEC 60794-2 / ITU-T G.657.A2. Values for your order are confirmed in the datasheet and quotation.

Electrical

Rated voltage / transmission duty: Optical Fibre (IEC 60794-2 / ITU-T G.657.A2)
Core / conductor construction: Central Optical Module (8J) — Eight Ø 0.9 mm tight-buffered optical fibres (8J, SM G.652.D / G.657.A or MM) reinforced with aramid yarns inside a yellow LSOH inner tube
Primary dielectric / insulation: FRP Dielectric Armouring (QG) — Helical ring of Ø 1.0 mm fibreglass-reinforced plastic (FRP) dielectric armour rods (QG) providing crush and radial impact protection

Thermal

Continuous operating temperature: −40…+80 °C (rated operating envelope)
Storage & transport temperature: −40…+80 °C on export drum or reel

Mechanical

Outer protection / sheath: Outer Reeling Sheath (dD) — 1.5 mm high-visibility orange thermoplastic polyurethane (PUR, code dD) outer sheath (OD 19.6 mm) for heavy mining & port reeling drums
Minimum bending radius: 12–15 × OD
Structural layer count: 5 concentric functional layers

Resistance

Environmental & chemical resistance: Industrial moisture, oils and mechanical wear per IEC 60794-2 / ITU-T G.657.A2
RoHS & REACH compliance: RoHS 2 (2011/65/EU + 2015/863) & REACH SVHC compliant

Reference standards

Governing standard: IEC 60794-2 / ITU-T G.657.A2
Quality management & inspection: ISO 9001:2015 & EN 10204 3.1 factory routine inspection

Identification

Model designation: ZW-(QG)GNOTKSdD
Customs tariff (HS): 8544.49 / 8544.60 / 8544.70

Sizes

4 standard ZW-(QG)GNOTKSdD configurations

Manufactured to IEC 60794-2 / ITU-T G.657.A2 for heavy-duty industrial and specialty engineering systems.

Dimensions, tensile ratings & weights
Order designation	Configuration	Core / stranding	Outer Ø ≈ mm	Weight ≈ kg/km	Tensile load kN ≈	Min. bend R mm
ZW-(QG)GNOTKSdD Construction Schedule (−40…+80 °C)
ZW-(QG)GNOTKSdD 4J (4×Ø 0.9 mm FO)	4 × Ø 0.9 mm Tight-Buffered FO	Central module + FRP rods + PUR	16.5	245	6.0	200
ZW-(QG)GNOTKSdD 8J (8×Ø 0.9 mm FO)	8 × Ø 0.9 mm Tight-Buffered FO	Central module + FRP rods + PUR	17.8	285	7.5	215
ZW-(QG)GNOTKSdD 12J (12×Ø 0.9 mm FO)	12 × Ø 0.9 mm Tight-Buffered FO	Central module + FRP rods + PUR	19.2	330	8.5	230
ZW-(QG)GNOTKSdD 24J (24×Ø 0.9 mm FO)	24 × Ø 0.9 mm Tight-Buffered FO	Central module + FRP rods + PUR	21.5	410	10.0	260

Typical values for this cable type; dimensions and weights for your order are confirmed in the quotation.
Custom core counts, cross-sections, sheath colours and factory-tested cut lengths available per IEC 60794-2 / ITU-T G.657.A2.

Electrical, optical & thermal parameters
Configuration	Max. DC R₂₀ / Atten. Ω/km or dB/km	Rating / Capacity	Operating temp.
4 × SM G.657.A2 (1310/1550 nm)	0.38	≤0.38 / ≤0.25 dB/km	−40…+80 °C
8 × SM G.657.A2 (1310/1550 nm)	0.38	≤0.38 / ≤0.25 dB/km	−40…+80 °C
12 × SM G.657.A2 / OM3	0.38	≤0.38 dB/km (SM) / ≤3.0 (OM3)	−40…+80 °C
24 × SM G.657.A2 / OM3	0.38	≤0.38 dB/km (SM) / ≤3.0 (OM3)	−40…+80 °C

Every production length undergoes routine conductor DC resistance, high-voltage dielectric and dimensional verification.

Quality & approvals

Testing & inspection

Routine tests on every production length, sample and type tests per batch — documented on an EN 10204 3.1 inspection certificate.

ConductorClass 5 stranding
Spark test100 % in-line
Lay-upCores, earth, fillers
SheathingInner, braid / screen, outer
Electrical testsAC voltage, resistance
DimensionsOD, wall thickness
Inspection documents & dispatchDrum & dispatch

Testing & inspection	Test value / reference	Frequency
Routine tests
Conductor resistance & dimensional verification (IEC 60794-2 / ITU-T G.657.A2)	Electrical parameters and outer diameter within IEC 60794-2 / ITU-T G.657.A2 tolerances	Every manufactured drum / length
High-voltage dielectric & insulation resistance test (IEC 60794-2 / ITU-T G.657.A2)	Zero dielectric breakdown and verified insulation resistance over full length	Every manufactured drum / length
Sample tests
Thermal ageing, mechanical flexing & environmental qualification (IEC 60794-2 / ITU-T G.657.A2)	Verified structural and dielectric integrity across −40…+80 °C	Type qualification & periodic lot audit

Inspection certificate

Issued with every drum, listing the routine test results for that length.

Product approvals

IEC 60794-2 CompliantEN 10204 3.1 Factory Test CertificateCE, RoHS 2 (2011/65/EU) & REACH

Company certificates

ISO 9001ISO 14001ISO 45001VDE marks approvalUL / cULCE · LVD / EMC

Marking & supply

Ordering & delivery

Sheath marking

TEBAOFLEX ZW-(QG)GNOTKSdD IEC 60794-2 Optical Fibre CE

Delivery form: Heavy-duty export wooden/steel drums or factory-tested coils
Standard lengths: 100 m, 250 m, 500 m, 1,000 m or custom cut-to-length reels
MOQ: 100 m (standard configurations) · 300 m (custom builds)
Lead time: 2–4 weeks ex-works
Incoterms: EXW, FCA, FOB, CIF, DAP

Technical documents

Downloads

PDFZW-(QG)GNOTKSdD FRP-Armoured PUR Reeling Fibre Cable – technical datasheet4 sizes · construction, technical data, approvals XLSXZW-(QG)GNOTKSdD spec data (Excel)All 4 sizes with dimensions and data, for your BOM or quotation

Revision: 2026-10-23
Updated: 2026-10-23

FAQ

Questions engineers ask first

Not covered here? Send your drawing — an engineer replies within 2 business hours.

What applications is ZW-(QG)GNOTKSdD engineered for?

ZW-(QG)GNOTKSdD all-dielectric reeling and mining optical cable combining Ø 0.9 mm tight-buffered fibres in a central LSOH module, helical Ø 1.0 mm FRP armour rods (QG), dual black elastomer bedding sheaths with aramid braid and an orange PUR jacket. It is built to IEC 60794-2 / ITU-T G.657.A2 for underground mine & tunnel gigabit optical backbones and mobile reeling drums, crane video & lidar telemetry.

What are the minimum bending radius and operating temperature range for ZW-(QG)GNOTKSdD?

The minimum bending radius for ZW-(QG)GNOTKSdD is 12–15 × OD across its continuous operating temperature range of -40 °C to +80 °C, ensuring mechanical and dielectric stability in industrial service.

How are the concentric layers of ZW-(QG)GNOTKSdD arranged from inside to outside?

From inside to outside, the construction sequence is: (01) Central Optical Module (8J) (Eight Ø 0.9 mm tight-buffered optical fibres (8J, SM G.652.D / G.657.A or MM) reinforced with aramid yarns inside a yellow LSOH inner tube); (02) FRP Dielectric Armouring (QG) (Helical ring of Ø 1.0 mm fibreglass-reinforced plastic (FRP) dielectric armour rods (QG) providing crush and radial impact protection); (03) Inner Elastomeric Sheath (1.0 mm black thermoplastic rubber inner bedding sheath encapsulating the FRP rod armour layer); (04) Aramid Reinforcement & Mid Sheath (High-tenacity aramid yarn tensile braid followed by a 3.0 mm black thermoplastic rubber intermediate cushioning sheath); (05) Outer Reeling Sheath (dD) (1.5 mm high-visibility orange thermoplastic polyurethane (PUR, code dD) outer sheath (OD 19.6 mm) for heavy mining & port reeling drums).

What factory test certificates are supplied with ZW-(QG)GNOTKSdD?

Every production drum of ZW-(QG)GNOTKSdD undergoes routine electrical continuity, high-voltage dielectric and dimensional testing per IEC 60794-2 / ITU-T G.657.A2, and is delivered with an EN 10204 3.1 factory test certificate.

Request a quote

Get an engineering quote for ZW-(QG)GNOTKSdD

Your selection and application details are copied into the enquiry form below.

01Selected sizes

Use + Add next to a size or configuration.

02Reel & motion

Add your operating conditions here to include them in your enquiry.

Reel typeDrum core diameter (mm)Cable length on drum (m)Travel speed (m/min)Max. accelerationCycles per hourLength and quantityAmbient temperatureExposure (outdoor, water, oil, abrasion)Destination countryEquipment and operating conditions

03Message for our engineers

ZW-(QG)GNOTKSdD FRP-Armoured PUR Reeling Fibre Cable

Selected sizes:


Reel & motion:
- Reel type: 
- Drum core diameter (mm): 
- Cable length on drum (m): 
- Travel speed (m/min): 
- Max. acceleration: 
- Cycles per hour: 
- Length and quantity: 
- Ambient temperature: 
- Exposure (outdoor, water, oil, abrasion): 
- Destination country: 
- Equipment and operating conditions:

Send via WhatsApp