1 / 5

Product

submersible water-quality, CTD & ocean sensor cable IEC 60092-376 / UL AWM300 V (-40 to +85 °C)Subsea / Marine Outer Protective She

Shielded TPE/PUR Harsh-Environment Sensor CableIEC 60092-376 / UL AWM — 300 V — -40 to +85 °C Subsea & Marine Cable

Shielded TPE/PUR Harsh-Environment Sensor Cable featuring coaxial center conductor and subsea / marine outer protective sheath (IEC 60092-376 / UL AWM, 300 V, -40 to +85 °C, min. bend radius 6 × OD).

Water-resistant

EMC screen

Outdoor & humid

Approved

Configuration

Order designation: Shielded TPE RG59/75Ω + 4C
Outer Ø ≈: 10.8 mm
Net weight ≈: 165 kg/km
Max. pulling ≈: 8.5 kN
Core / stranding: SnCu Center + Foam PE + TCWB + Subsea PUR

All sizes (3)

Request a quote Datasheet WhatsApp info@tebaoflex.com

Engineering reply in 2 business hoursCut-to-length export drumsEN 10204 3.1 certificate per drum

Rated voltage: 300 V
Operating temp.: −40…+85 °C
Min. bend radius: 6 × OD
Core / conductor: Coaxial Center C
Outer protection: Subsea / Marine
Standard: IEC 60092-376 /

Typical values for this cable type, based on IEC 60092-376 Shielded TPE/PUR Harsh-Environment Subsea Sensor Specification — confirmed in the datasheet and quotation for your order.

Application fit

Is Shielded TPE/PUR Sensor right for your machine?

Immersion & wet locations

Suitable

Hydrolysis-resistant ether-grade PUR/TPU jackets, water-blocked cores and optional atmospheric vent tubes support permanent immersion.

Free-hanging vertical run

Suitable

Integrated aramid yarns or galvanized steel wire armour allow direct vertical probe suspension in sea cages, wells and stilling tubes.

Fixed installation

Suitable

Foil plus tinned copper braid screening protects low-level mV, 4–20 mA, SDI-12, RS-485 and optical DO signals from pump VFD noise.

Offshore platform & shipboard deck trays

Suitable

Resists bio-fouling cleaning agents, saline splash, sunlight and −30/−40 °C winter freeze around open aquaculture tanks.

Energy chain / drag chain

Not suitable

Submersible water-quality probe cables are designed for static/suspended immersion rather than high-speed machine drag chains.

Use CF211.PUR Encoder Chain Cable

Typical machinesUnderwater & Ocean ExplorationAquaculture Dissolved Oxygen (DO), pH & Salinity MonitoringVented Hydrostatic Water-Level & Borehole Pressure ProbesOceanographic CTD Rosettes, Current Meters & Mooring BuoysRecirculating Aquaculture (RAS) & Wastewater Sensor Networks

Construction

Layer by layer

Shown: Shielded TPE/PUR Sensor (IEC 60092-376 Shielded TPE/PUR Harsh-Environment Subsea Sensor Specification) featuring coaxial center conductor, low-loss coaxial dielectric & braid shield and subsea / marine outer protective sheath (3-layer construction).

Shielded TPE/PUR Sensor — stepped horizontal cutaway showing Coaxial Center Conductor and Subsea / Marine Outer Protec — Layer cutaway

#	Layer	Material & reference
1	Coaxial Center Conductor	High-conductivity stranded copper (or steel-core on CB 1900) center conductor
2	Low-Loss Coaxial Dielectric & Braid Shie	Thermoplastic elastomer (TPE) core insulation + braided copper outer conductor
3	Subsea / Marine Outer Protective Sheath	Black hydrolysis- & abrasion-resistant marine Polyurethane (PUR) outer sheath

Shielded TPE/PUR Sensor — Standard Subsea & Marine Execution

Built to IEC 60092-376 Shielded TPE/PUR Harsh-Environment Subsea Sensor Specification with coaxial center conductor and subsea / marine outer protective sheath

Shielded TPE/PUR Sensor — Custom Winch Length / Molded Termination

Available on continuous export winch drums or factory-terminated with subsea wet-mate / mechanical sockets

Shielded TPE/PUR Sensor — Hydrostatic & Routine Certified

Supplied with EN 10204 3.1 routine dielectric, conductor/optical continuity & hydrostatic qualification report

Technical data

Ratings & operating limits

Typical values: Typical values for this cable type, based on IEC 60092-376 Shielded TPE/PUR Harsh-Environment Subsea Sensor Specification. Values for your order are confirmed in the datasheet and quotation.

Electrical

Rated voltage / operating system: 300 V (IEC 60092-376 Shielded TPE/PUR Harsh-Environment Subsea Sensor Specification)
Core / conductor construction: Coaxial Center Conductor — High-conductivity stranded copper (or steel-core on CB 1900) center conductor
Primary dielectric / optical buffer: Low-Loss Coaxial Dielectric & Braid Shield — Thermoplastic elastomer (TPE) core insulation + braided copper outer conductor

Thermal

Continuous operating temperature: −40…+85 °C (submerged seawater & topside deck service)
Hydrostatic & thermal cycling endurance: Verified cold-bend and wet dielectric stability across −40…+85 °C per IEC 60092-376 Shielded TPE/PUR Harsh-Environment Subsea Sensor Specification
Storage & transport temperature: −40…+80 °C on export wooden/steel cable drum

Mechanical

Outer jacket / sheath protection: Subsea / Marine Outer Protective Sheath — Black hydrolysis- & abrasion-resistant marine Polyurethane (PUR) outer sheath
Minimum bending radius: 6 × OD
Reinforcement / screen / bedding layer: Low-Loss Coaxial Dielectric & Braid Shield — Thermoplastic elastomer (TPE) core insulation + braided copper outer conductor

Resistance

Seawater, hydrolysis & oil resistance: Resistant to permanent seawater immersion, hydrolysis, hydraulic oil and bio-fouling per IEC 60092-376 Shielded TPE/PUR Harsh-Environment Subsea Sensor Specification
Hydrostatic pressure & water blocking: Radial and longitudinal water-blocking integrity verified per IEC 60092-376 Shielded TPE/PUR Harsh-Environment Subsea Sensor Specification
RoHS & REACH compliance: RoHS 2 (2011/65/EU + 2015/863) & REACH SVHC compliant

Reference standards

Governing standard: IEC 60092-376 Shielded TPE/PUR Harsh-Environment Subsea Sensor Specification
Subsea & conductor qualification standards: IEC 60228 / DNV-ST-E402 / ISO 13628-5 / IEC 60794 / EN 10204
Quality management & inspection: ISO 9001:2015 & EN 10204 3.1 factory routine inspection

Identification

Model designation: Shielded TPE/PUR Sensor
Sheath colour & metre marking: Continuous metre-marked black outer finish (Subsea / Marine )
Customs tariff (HS): 8544.49 / 8544.60 / 8544.70

Sizes

3 standard Shielded TPE/PUR Sensor configurations

Manufactured to IEC 60092-376 Shielded TPE/PUR Harsh-Environment Subsea Sensor Specification for subsea robotics, ROV umbilicals, marine aquaculture and offshore sensor applications.

Dimensions, tensile load & weights
Order designation	Configuration	Core / stranding	Outer Ø ≈ mm	Net weight ≈ kg/km	Max. pulling kN ≈	Min. bend R mm
Shielded TPE/PUR Sensor Construction Schedule (−40…+85 °C)
Shielded TPE RG59/75Ω + 4C	1×75 Ω Coax + 4×0.75 mm² (18 AWG)	SnCu Center + Foam PE + TCWB + Subsea PUR	10.8	165	8.5	65
Shielded TPE RG213/50Ω + 6C	1×50/75 Ω Coax + 6×1.5 mm² + 1×TP	SnCu + Dual Braid Shield + Aramid/GSWA	14.4	340	22.0	90
Shielded TPE 3×Coax + 6C	3×75 Ω Video Coax + 6×1.5 mm² Power	Multi-Coax Bundle + Armour + Subsea Jacket	18.6	620	48.0	125

Typical values for this cable type; dimensions and weights for your order are confirmed in the quotation.
Custom core counts, optical fiber channels, wet-mate terminations and continuous winch lengths available per IEC 60092-376 Shielded TPE/PUR Harsh-Environment Subsea Sensor Specification.

Electrical, optical & thermal parameters
Configuration	Max. DC R₂₀ Ω/km	Rating / Impedance / Load	Operating temp.
1×75 Ω Coax + 4×0.75 mm² (18 AWG)	26.00	300 V · 75 Ω ±3 Ω	−40…+85 °C
1×50/75 Ω Coax + 6×1.5 mm² + 1×TP	13.30	300 V · 50/75 Ω Sonar	−40…+85 °C
3×75 Ω Video Coax + 6×1.5 mm² Power	13.30	300 V · 3-Ch 75 Ω Coax	−40…+85 °C

Every production length undergoes routine conductor DC resistance / OTDR optical attenuation, AC dielectric and dimensional verification.

Quality & approvals

Testing & inspection

Routine tests on every production length, sample and type tests per batch — documented on an EN 10204 3.1 inspection certificate.

ConductorClass 5 stranding
Spark test100 % in-line
Lay-upCores, earth, fillers
SheathingInner, braid / screen, outer
Electrical testsAC voltage, resistance
DimensionsOD, wall thickness
Inspection documents & dispatchDrum & dispatch

Testing & inspection	Test value / reference	Frequency
Routine tests
Conductor DC resistance / OTDR optical & dimensional check (IEC 60092-376 Shielded TPE/PUR Harsh-Environment Subsea Sensor Specification)	DC resistance at 20 °C, optical attenuation and wall thickness within IEC 60092-376 Shielded TPE/PUR Harsh-Environment Subsea Sensor Specification limits	Every manufactured drum length
AC high-voltage dielectric & insulation resistance test (IEC 60092-376 Shielded TPE/PUR Harsh-Environment Subsea Sensor Specification)	Zero dielectric breakdown and verified wet insulation resistance for 300 V rating	Every manufactured drum length
Sample tests
Hydrostatic pressure, tensile load & seawater immersion qualification (IEC 60092-376 Shielded TPE/PUR Harsh-Environment Subsea Sensor Specification)	Verified hydrostatic pressure integrity, breaking load and flex endurance across −40…+85 °C	Type qualification & periodic lot audit

Inspection certificate

Issued with every drum, listing the routine test results for that length.

Product approvals

IEC 60092-376 / UL AWM CompliantEN 10204 3.1 Factory Test CertificateCE, RoHS 2 (2011/65/EU) & REACH

Company certificates

ISO 9001ISO 14001ISO 45001VDE marks approvalUL / cULCE · LVD / EMC

Marking & supply

Ordering & delivery

Sheath marking

TEBAOFLEX Shielded TPE/PUR Sensor IEC 60092-376 / UL AWM 300 V CE

Delivery form: Heavy-duty export fumigated wooden drums, steel winch reels or pre-terminated subsea assemblies
Standard lengths: 500 m, 1,000 m, 3,000 m continuous winch lengths or custom cut-to-length subsea jumpers
MOQ: 100 m (standard configurations) · 300 m (custom subsea builds)
Lead time: 2–4 weeks ex-works
Incoterms: EXW, FCA, FOB, CIF, DAP

Technical documents

Downloads

PDFShielded TPE/PUR Harsh-Environment Sensor Cable – technical datasheet3 sizes · construction, technical data, approvals XLSXShielded TPE/PUR Sensor spec data (Excel)All 3 sizes with dimensions and data, for your BOM or quotation

Revision: 2026-10-29
Updated: 2026-10-29

FAQ

Questions engineers ask first

Not covered here? Send your drawing — an engineer replies within 2 business hours.

What governing standard and construction define Shielded TPE/PUR Sensor (Shielded TPE/PUR Harsh-Environment Sensor Cable)?

Shielded TPE/PUR Sensor (Shielded TPE/PUR Harsh-Environment Sensor Cable) is manufactured in accordance with IEC 60092-376 Shielded TPE/PUR Harsh-Environment Subsea Sensor Specification for 300 V subsea,ROV and marine aquaculture service over -40 to +85 °C. Its 3-layer construction comprises coaxial center conductor, low-loss coaxial dielectric & braid shield and subsea / marine outer protective sheath.

What is the minimum bending radius and operating temperature range for Shielded TPE/PUR Sensor?

The minimum bending radius for Shielded TPE/PUR Sensor is 6 × OD across its continuous operating temperature range of -40 to +85 °C, ensuring mechanical flex endurance and hydrostatic reliability in subsea winches, TMS cages and aquaculture installations.

How are the concentric layers of Shielded TPE/PUR Sensor arranged from inside to outside?

From inside to outside, the construction sequence is: (01) Coaxial Center Conductor — High-conductivity stranded copper (or steel-core on CB 1900) center conductor; (02) Low-Loss Coaxial Dielectric & Braid Shield — Thermoplastic elastomer (TPE) core insulation + braided copper outer conductor; (03) Subsea / Marine Outer Protective Sheath — Black hydrolysis- & abrasion-resistant marine Polyurethane (PUR) outer sheath.

What factory test certificates are supplied with Shielded TPE/PUR Sensor?

Every production drum of Shielded TPE/PUR Sensor undergoes routine conductor DC resistance / optical OTDR continuity, AC high-voltage dielectric and dimensional testing per IEC 60092-376 Shielded TPE/PUR Harsh-Environment Subsea Sensor Specification, and is delivered with an EN 10204 3.1 factory test certificate.

Request a quote

Get an engineering quote for Shielded TPE/PUR Sensor

Your selection and application details are copied into the enquiry form below.

01Selected sizes

Use + Add next to a size or configuration.

02Reel & motion

Add your operating conditions here to include them in your enquiry.

Reel typeDrum core diameter (mm)Cable length on drum (m)Travel speed (m/min)Max. accelerationCycles per hourLength and quantityAmbient temperatureExposure (outdoor, water, oil, abrasion)Destination countryEquipment and operating conditions

03Message for our engineers

Shielded TPE/PUR Harsh-Environment Sensor Cable

Selected sizes:


Reel & motion:
- Reel type: 
- Drum core diameter (mm): 
- Cable length on drum (m): 
- Travel speed (m/min): 
- Max. acceleration: 
- Cycles per hour: 
- Length and quantity: 
- Ambient temperature: 
- Exposure (outdoor, water, oil, abrasion): 
- Destination country: 
- Equipment and operating conditions:

Send via WhatsApp