1 / 5

Product

UL AWM Style 2570 SERVO 7DSL Hybrid UL AWM Style 2570 / VDE 0250600/1000 V−40…+80 °C

Low-Capacitance Servo Motor + Hiperface DSL Single-Cable Hybrid CableUL AWM Style 2570 / VDE 0250 · 600/1000 V · -40 °C to +80 °C industrial SERVO 7DSL Hybrid

Low-Capacitance Servo Motor + Hiperface DSL Single-Cable Hybrid Cable engineered to UL AWM Style 2570 / VDE 0250 for 600/1000 V service across -40 °C to +80 °C, featuring stranded copper conductor and pvc outer sheath with minimum bending radius 6 × OD.

Approved

Low-EMC design

EMC screen

Oil-resistant

Configuration

Order designation: SERVO 7DSL Hybrid 4G2.5
Outer Ø ≈: 10.8 mm
Total weight ≈: 186 kg/km
Min. bend R (fixed): 86 mm
Configuration: 4 × 2.5 mm²

All sizes (12)

Request a quote Datasheet WhatsApp info@tebaoflex.com

Engineering reply in 2 business hoursCut-to-length export drumsEN 10204 3.1 certificate per drum

Rated voltage: 600/1000 V
Operating temp.: −40…+80 °C
Min. bend radius: 6 × OD
Conductor: copper conductor
Outer layer: PVC outer sheath
Standard: UL AWM Style

Typical values for this cable type, based on UL AWM Style 2570 / VDE 0250 — confirmed in the datasheet and quotation for your order.

Application fit

Is SERVO 7DSL Hybrid right for your machine?

Fixed installation

Suitable

Engineered and verified for fixed service in accordance with UL AWM Style 2570 / VDE 0250.

VFD inverter to AC motor screened feeder

Suitable

Engineered and verified for vfd drive service in accordance with UL AWM Style 2570 / VDE 0250.

Switchgear & control cabinet wiring

Suitable

Suitable for switchgear, control panels and equipment terminations within 6 × OD bend radius.

TBM gantry & advancing tunnel reel

With conditions

Use mechanical conduit or armoured protection where exposed to rock fall or crushing loads.

Typical machinesIndustrial Automation CableAutomated Assembly & Packaging LinesCNC Machine Tools & RoboticsPLC/DCS Control & Marshalling CabinetsIndustrial Drives & Motor ManufacturingClosed-Loop Servo Drives & Linear Actuators

Construction

Layer by layer

Shown: SERVO 7DSL Hybrid (UL AWM Style 2570 / VDE 0250) with stranded copper conductor, pp core insulation and pvc outer sheath (9-layer construction).

Schematic, not to scale — generated from the layer data

#	Layer	Material & reference
1	Stranded copper conductor	High-conductivity copper conductor per UL AWM Style 2570 / VDE 0250UL AWM Style 2570 / VDE 0250
2	PP core insulation	Extruded PP dielectric (individual core / group layer)UL AWM Style 2570 / VDE 0250
3	Signal fleece wrapping	Helically applied signal fleece wrappingUL AWM Style 2570 / VDE 0250
4	Signal tinned copper braid	Signal tinned copper braid high-coverage braided layer (individual core / group layer)UL AWM Style 2570 / VDE 0250
5	Al-metallized textile tape	Al-metallized textile tape (individual core / group layer)UL AWM Style 2570 / VDE 0250
6	Double polyester signal overwrap	Helically applied double polyester signal overwrapUL AWM Style 2570 / VDE 0250
7	Soft fleece overall wrap	Helically applied soft fleece overall wrapUL AWM Style 2570 / VDE 0250
8	Overall tinned copper braid	Overall tinned copper braid high-coverage braided layer (woven structure)UL AWM Style 2570 / VDE 0250
9	PVC outer sheath	Extruded PVC outer sheath protective layer (continuous layer)UL AWM Style 2570 / VDE 0250

SERVO 7DSL Hybrid — Standard Execution

Built to UL AWM Style 2570 / VDE 0250 with stranded copper conductor and pvc outer sheath

SERVO 7DSL Hybrid — Custom Cross-Sections

Full range of metric mm² and AWG/kcmil conductor sizes per UL AWM Style 2570 / VDE 0250

SERVO 7DSL Hybrid — Export Drum Supply

Supplied with EN 10204 3.1 routine dielectric & conductor resistance test certificate

Technical data

Ratings & operating limits

Typical values: Typical values for this cable type, based on UL AWM Style 2570 / VDE 0250. Values for your order are confirmed in the datasheet and quotation.

Electrical

Rated voltage / duty: 600/1000 V (UL AWM Style 2570 / VDE 0250)
Conductor construction: Stranded copper conductor — High-conductivity copper conductor per UL AWM Style 2570 / VDE 0250
Primary insulation / dielectric: PP core insulation — Extruded PP dielectric (individual core / group layer)

Thermal

Continuous operating temperature: −40…+80 °C per UL AWM Style 2570 / VDE 0250
Short-circuit / peak thermal limit: +160 °C to +250 °C (5 s adiabatic limit depending on dielectric class)
Minimum installation temperature: −5 °C (thermoplastic) / −25 °C (cross-linked or elastomer) / −40 °C (metallic)

Mechanical

Outer protection / covering: PVC outer sheath — Extruded PVC outer sheath protective layer (continuous layer)
Minimum bending radius: 6 × OD (installed / static routing)
Layer count & geometry: 9 concentric/structural layers verified by cross-section inspection

Resistance

Environmental & chemical durability: Engineered for industrial service in accordance with UL AWM Style 2570 / VDE 0250
RoHS & REACH compliance: RoHS 2 (2011/65/EU + 2015/863) & REACH SVHC compliant

Reference standards

Governing product standard: UL AWM Style 2570 / VDE 0250
Quality management & inspection: ISO 9001:2015 & EN 10204 3.1 factory routine inspection

Identification

Model designation: SERVO 7DSL Hybrid
Customs tariff (HS): 8544.49 / 8544.60 / 7614.10

Sizes

12 standard SERVO 7DSL Hybrid cable sizes

Manufactured to UL AWM Style 2570 / VDE 0250 across standard single-core and multi-core cross-sections.

Dimensions, construction & weights
Order designation	Configuration	Outer Ø ≈ mm	Weight ≈ kg/km	Min. bend R fixed mm
SERVO 7DSL Hybrid Standard Production Schedule (600/1000 V · −40…+80 °C)
SERVO 7DSL Hybrid 3G1.5	3 × 1.5 mm²	8.4	105	68
SERVO 7DSL Hybrid 4G1.5	4 × 1.5 mm²	9.2	128	74
SERVO 7DSL Hybrid 5G1.5	5 × 1.5 mm²	10.1	156	81
SERVO 7DSL Hybrid 3G2.5	3 × 2.5 mm²	9.8	148	78
SERVO 7DSL Hybrid 4G2.5	4 × 2.5 mm²	10.8	186	86
SERVO 7DSL Hybrid 5G2.5	5 × 2.5 mm²	11.9	228	95
SERVO 7DSL Hybrid 4G4	4 × 4.0 mm²	12.6	268	101
SERVO 7DSL Hybrid 4G6	4 × 6.0 mm²	14.2	365	114
SERVO 7DSL Hybrid 4G10	4 × 10 mm²	17.5	580	140
SERVO 7DSL Hybrid 4G16	4 × 16 mm²	20.4	845	163
SERVO 7DSL Hybrid 4G25	4 × 25 mm²	24.8	1,290	198
SERVO 7DSL Hybrid 4G35	4 × 35 mm²	27.9	1,710	223

Typical values for this cable type; dimensions and weights for your order are confirmed in the quotation.
Single-core and multi-core sizes from 0.5 mm² up to 630 mm² (or AWG/kcmil) available per UL AWM Style 2570 / VDE 0250.

Conductor resistance & current-carrying capacity
Cross-section	Max. DC R₂₀ Ω/km	Current in air A (30 °C) ≈	Voltage drop mV/A·m
1.5 mm² (AWG 16)	13.30	18	29.0
2.5 mm² (AWG 14)	7.98	26	17.5
4.0 mm² (AWG 12)	4.95	34	10.9
6.0 mm² (AWG 10)	3.30	44	7.3
10 mm² (AWG 8)	1.91	61	4.2
16 mm² (AWG 6)	1.21	82	2.7
25 mm² (AWG 4)	0.78	108	1.7
35 mm² (AWG 2)	0.55	135	1.2

Current ratings are for 3 loaded conductors at 30 °C ambient in free air/tray per IEC 60364-5-52 / NEC.

Quality & approvals

Testing & inspection

Routine tests on every production length, sample and type tests per batch — documented on an EN 10204 3.1 inspection certificate.

ConductorClass 5 stranding
Spark test100 % in-line
Lay-upCores, earth, fillers
SheathingInner, braid / screen, outer
Electrical testsAC voltage, resistance
DimensionsOD, wall thickness
Inspection documents & dispatchDrum & dispatch

Testing & inspection	Test value / reference	Frequency
Routine tests
Conductor DC resistance & dimensional verification (UL AWM Style 2570 / VDE 0250)	DC resistance at 20 °C and geometry within UL AWM Style 2570 / VDE 0250 class limits	Every manufactured drum / spool
Routine dielectric / spark / structural integrity test (UL AWM Style 2570 / VDE 0250)	Zero breakdown or structural defect over full production length	Every manufactured drum / spool
Sample tests
Thermal aging, mechanical & material qualification (UL AWM Style 2570 / VDE 0250)	Full compliance with UL AWM Style 2570 / VDE 0250 across −40…+80 °C	Type qualification & periodic sample audit

Inspection certificate

Issued with every drum, listing the routine test results for that length.

Product approvals

UL AWM Style 2570 CompliantEN 10204 3.1 Routine Test CertificateCE, RoHS 2 (2011/65/EU) & REACH

Company certificates

ISO 9001ISO 14001ISO 45001VDE marks approvalUL / cULCE · LVD / EMC

Marking & supply

Ordering & delivery

Sheath marking

TEBAOFLEX SERVO 7DSL Hybrid <size> UL AWM Style 2570 600/1000 V CE

Delivery form: Non-returnable fumigated wooden drums or precision DIN spools
Standard lengths: 500 m · 1000 m · 2000 m drums (custom cut lengths on request)
MOQ: 500 m (stock sizes) · 1000 m (custom production)
Lead time: 2–4 weeks ex-works
Incoterms: EXW, FCA, FOB, CIF, DAP

Technical documents

Downloads

PDFLow-Capacitance Servo Motor + Hiperface DSL Single-Cable Hybrid – technical datasheet12 sizes · construction, technical data, approvals XLSXSERVO 7DSL Hybrid spec data (Excel)All 12 sizes with dimensions and data, for your BOM or quotation

Revision: 2026-10-21
Updated: 2026-10-21

FAQ

Questions engineers ask first

Not covered here? Send your drawing — an engineer replies within 2 business hours.

What governing standard and construction define SERVO 7DSL Hybrid (Low-Capacitance Servo Motor + Hiperface DSL Single-Cable Hybrid Cable)?

SERVO 7DSL Hybrid (Low-Capacitance Servo Motor + Hiperface DSL Single-Cable Hybrid Cable) is manufactured in accordance with UL AWM Style 2570 / VDE 0250 for 600/1000 V service over -40 °C to +80 °C. Its 9-layer construction comprises stranded copper conductor, pp core insulation, signal fleece wrapping, signal tinned copper braid, al-metallized textile tape, double polyester signal overwrap, soft fleece overall wrap, overall tinned copper braid, pvc outer sheath.

What is the minimum bending radius and installation temperature for SERVO 7DSL Hybrid?

The minimum installed bending radius for SERVO 7DSL Hybrid is 6 × OD across its continuous operating temperature range of -40 °C to +80 °C, ensuring mechanical and dielectric stability without conductor or insulation strain.

How are the concentric layers of SERVO 7DSL Hybrid arranged from inside to outside?

From inside to outside, the construction sequence is: (01) Stranded copper conductor (High-conductivity copper conductor per UL AWM Style 2570 / VDE 0250); (02) PP core insulation (Extruded PP dielectric (individual core / group layer)); (03) Signal fleece wrapping (Helically applied signal fleece wrapping); (04) Signal tinned copper braid (Signal tinned copper braid high-coverage braided layer (individual core / group layer)); (05) Al-metallized textile tape (Al-metallized textile tape (individual core / group layer)); (06) Double polyester signal overwrap (Helically applied double polyester signal overwrap); (07) Soft fleece overall wrap (Helically applied soft fleece overall wrap); (08) Overall tinned copper braid (Overall tinned copper braid high-coverage braided layer (woven structure)); (09) PVC outer sheath (Extruded PVC outer sheath protective layer (continuous layer)).

What factory test certificates are supplied with SERVO 7DSL Hybrid?

Every production drum or spool of SERVO 7DSL Hybrid undergoes routine conductor DC resistance, dimensional and dielectric/integrity testing per UL AWM Style 2570 / VDE 0250, and is delivered with an EN 10204 3.1 factory test certificate.

Request a quote

Get an engineering quote for SERVO 7DSL Hybrid

Your selection and application details are copied into the enquiry form below.

01Selected sizes

Use + Add next to a size or configuration.

02Reel & motion

Add your operating conditions here to include them in your enquiry.

Reel typeDrum core diameter (mm)Cable length on drum (m)Travel speed (m/min)Max. accelerationCycles per hourLength and quantityAmbient temperatureExposure (outdoor, water, oil, abrasion)Destination countryEquipment and operating conditions

03Message for our engineers

SERVO 7DSL Hybrid Low-Capacitance Servo Motor + Hiperface DSL Single-Cable Hybrid Cable

Selected sizes:


Reel & motion:
- Reel type: 
- Drum core diameter (mm): 
- Cable length on drum (m): 
- Travel speed (m/min): 
- Max. acceleration: 
- Cycles per hour: 
- Length and quantity: 
- Ambient temperature: 
- Exposure (outdoor, water, oil, abrasion): 
- Destination country: 
- Equipment and operating conditions:

Send via WhatsApp