1 / 5

Product

High-LOI flat yellow mining shotfiring & blasting cable GIG Barbara Approved2 × 1.5 mm² Class 5LOI ≥ 28% Yellow PVC

PSY 2x1.5 Flat High-Visibility Mining Shotfiring CablePSY 2x1.5 underground mining twin-core flat shotfiring and blasting main-line cable certified by GIG Barbara for methane and coal-dust faces, with 2 × 1.5 mm² Class 5 bare copper cores, Red/Green PVC insulation and yellow high-LOI FR-PVC sheath.

Engineered for underground mining, open-cast excavation, shaft infrastructure and heavy industrial service per PN-EN 60228 / IEC 60332-1-2 / GIG Barbara across -25 to +70 °C.

Flame-retardant

Oil-resistant

Approved

Ozone, UV & moisture

Configuration

Order designation: PSY 2×1.5 mm² Standard Shotfiring Line
Outer Ø ≈: 5.0 mm
Net weight ≈: 42 kg/km
Tensile rating ≈: 0.5 kN
Core / stranding: Class 5 bare Cu

All sizes (3)

Request a quote Datasheet WhatsApp info@tebaoflex.com

Engineering reply in 2 business hoursCut-to-length export drumsEN 10204 3.1 certificate per drum

Rated voltage: 300/500 V
Operating temp.: -25 to +70 °C
Min. bend radius: 8 × OD
Core / conductor: 2 × 1.5 mm² Cu
Outer protection: Flat Yellow PVC
Standard: PN-EN 60228

Typical values for this cable type, based on PN-EN 60228 / IEC 60332-1-2 / GIG Barbara — confirmed in the datasheet and quotation for your order.

Application fit

Is PSY 2x1.5 right for your machine?

Engineered for underground mining, open-cast excavation, shaft infrastructure and heavy industrial service per PN-EN 60228 / IEC 60332-1-2 / GIG Barbara across -25 to +70 °C.

Mine roadway & tunnel wall hangers

Suitable

Engineered for underground mining shafts, galleries and tunnel infrastructure per PN-EN 60228 / IEC 60332-1-2 / GIG Barbara.

Fixed installation

Suitable

Suitable for vertical shaft cleats, gallery messenger hooks and tray routing within 8 × OD.

Free-hanging vertical run

Suitable

Supports inclined roadway and vertical mine shaft suspension within rated kN load across -25 to +70 °C.

Festoon & line chain

Not suitable

Not optimized for high-speed overhead crane C-track festoon loops; select a dedicated festoon cable.

NGFLGÖU Flat Rubber Festoon Cable

Typical machinesMining & TunnellingUnderground Coal & Hard-Rock MiningOpen-Cast Excavators, Draglines & ShovelsVertical Mine Shafts, Hoists & BoreholesTunneling, Mineral Processing & Slurry Plants

Construction

Layer by layer

Shown: PSY 2x1.5 (PN-EN 60228 / IEC 60332-1-2 / GIG Barbara) featuring parallel conductors (2×1.5 mm²), parallel red & green pvc insulation (y) and flat high-visibility yellow sheath (y) (3-layer construction).

Schematic, not to scale — generated from the layer data

#	Layer	Material & reference
1	Parallel Conductors (2×1.5 mm²)	PN-EN 60228 Class 5 flexible bare annealed copper (≤26.6 Ω/km loop)
2	Parallel Red & Green PVC Insulation (Y)	Color-coded Red and Green PVC cores laid parallel side-by-side
3	Flat High-Visibility Yellow Sheath (Y)	2.5×5.0 mm flat yellow mining flame-retardant PVC jacket (LOI ≥ 28%, 3 kV test)

PSY 2x1.5 — Standard Mining Execution

Built to PN-EN 60228 / IEC 60332-1-2 / GIG Barbara with parallel conductors (2×1.5 mm²) and flat high-visibility yellow sheath (y)

PSY 2x1.5 — Custom Drum Length & Gland Kit

Available in custom shaft/roadway drum lengths or pre-terminated assemblies

PSY 2x1.5 — Routine & Flame Test Certified

Supplied with EN 10204 3.1 routine dielectric, resistance & flame test report

Technical data

Ratings & operating limits

Typical values: Typical values for this cable type, based on PN-EN 60228 / IEC 60332-1-2 / GIG Barbara. Values for your order are confirmed in the datasheet and quotation.

Electrical

Rated voltage / transmission duty: 300/500 V (PN-EN 60228 / IEC 60332-1-2 / GIG Barbara)
Core / conductor construction: Parallel Conductors (2×1.5 mm²) — PN-EN 60228 Class 5 flexible bare annealed copper (≤26.6 Ω/km loop)
Primary dielectric / buffering: Parallel Red & Green PVC Insulation (Y) — Color-coded Red and Green PVC cores laid parallel side-by-side

Thermal

Continuous operating temperature: -25 to +70 °C (mining & industrial service)
Short-circuit / peak thermal rating: Verified thermal stability per PN-EN 60228 / IEC 60332-1-2 / GIG Barbara
Storage & transport temperature: −40…+80 °C on export wooden/steel drum

Mechanical

Outer protection / armouring: Flat High-Visibility Yellow Sheath (Y) — 2.5×5.0 mm flat yellow mining flame-retardant PVC jacket (LOI ≥ 28%, 3 kV test)
Minimum bending radius: 8 × OD
Crush, impact & abrasion duty: Heavy-duty mining rock-cut, impact and tensile protection per PN-EN 60228 / IEC 60332-1-2 / GIG Barbara

Resistance

Flame retardancy & mine fire safety: Self-extinguishing / flame-retardant mining jacket per PN-EN 60228 / IEC 60332-1-2 / GIG Barbara
Mine water, oil & chemical resistance: Resistant to acidic mine water, hydraulic oils and abrasion per PN-EN 60228 / IEC 60332-1-2 / GIG Barbara
RoHS & REACH compliance: RoHS 2 (2011/65/EU + 2015/863) & REACH SVHC compliant

Reference standards

Governing standard: PN-EN 60228 / IEC 60332-1-2 / GIG Barbara
Flame & environmental test standards: IEC 60332 / MSHA / EN 60794 / IEC 60228
Quality management & inspection: ISO 9001:2015 & EN 10204 3.1 factory routine inspection

Identification

Model designation: PSY 2x1.5
Sheath colour & metre marking: Continuous metre-marked yellow mining outer sheath
Customs tariff (HS): 8544.49 / 8544.60 / 8544.70

Sizes

3 standard PSY 2x1.5 mining & industrial configurations

Manufactured to PN-EN 60228 / IEC 60332-1-2 / GIG Barbara for underground mining, open-cast excavation, shaft and heavy industrial systems.

Dimensions, tensile load & weights
Order designation	Configuration	Core / stranding	Outer Ø ≈ mm	Net weight ≈ kg/km	Tensile rating kN ≈	Min. bend R mm
PSY 2x1.5 Construction Schedule (-25 to +70 °C)
PSY 2×1.0 mm² Auxiliary Firing Line	2 × 1.0 mm² Flat Parallel	Class 5 bare Cu	4.4	31	0.3	35
PSY 2×1.5 mm² Standard Shotfiring Line	2 × 1.5 mm² Flat Parallel (2.5×5.0)	Class 5 bare Cu	5.0	42	0.5	40
PSY 2×2.5 mm² Long-Gallery Firing Bus	2 × 2.5 mm² Flat Parallel	Class 5 bare Cu	6.2	66	0.8	50

Typical values for this cable type; dimensions and weights for your order are confirmed in the quotation.
Custom core cross-sections, pair/fibre counts, armour grades and factory drum lengths available per PN-EN 60228 / IEC 60332-1-2 / GIG Barbara.

Electrical, optical & thermal parameters
Configuration	Max. DC R₂₀ / Atten. Ω/km or dB/km	Rating / Impedance	Operating temp.
2 × 1.0 mm² Flat Parallel	19.50	≤39.0 Ω/km loop (3 kV test)	-25 to +70 °C
2 × 1.5 mm² Flat Parallel	13.30	≤26.6 Ω/km loop (3 kV test)	-25 to +70 °C
2 × 2.5 mm² Flat Parallel	7.98	≤16.0 Ω/km loop (3 kV test)	-25 to +70 °C

Every production length undergoes routine conductor DC resistance, high-voltage Spark/AC dielectric or OTDR continuity and dimensional verification.

Quality & approvals

Testing & inspection

Routine tests on every production length, sample and type tests per batch — documented on an EN 10204 3.1 inspection certificate.

ConductorClass 5 stranding
Spark test100 % in-line
Lay-upCores, earth, fillers
SheathingInner, braid / screen, outer
Electrical testsAC voltage, resistance
DimensionsOD, wall thickness
Inspection documents & dispatchDrum & dispatch

Testing & inspection	Test value / reference	Frequency
Routine tests
Conductor resistance, continuity & dimensional verification (PN-EN 60228 / IEC 60332-1-2 / GIG Barbara)	DC resistance at 20 °C / optical attenuation and outer diameter within PN-EN 60228 / IEC 60332-1-2 / GIG Barbara tolerances	Every manufactured drum length
High-voltage dielectric & insulation resistance test (PN-EN 60228 / IEC 60332-1-2 / GIG Barbara)	Zero dielectric breakdown and verified insulation resistance over full production length	Every manufactured drum length
Sample tests
Flame propagation, mechanical crush & thermal ageing qualification (PN-EN 60228 / IEC 60332-1-2 / GIG Barbara)	Verified flame retardancy, mechanical integrity and thermal endurance across -25 to +70 °C	Type qualification & periodic lot audit

Inspection certificate

Issued with every drum, listing the routine test results for that length.

Product approvals

PN-EN 60228 CompliantEN 10204 3.1 Factory Test CertificateCE, RoHS 2 (2011/65/EU) & REACH

Company certificates

ISO 9001ISO 14001ISO 45001VDE marks approvalUL / cULCE · LVD / EMC

Marking & supply

Ordering & delivery

Sheath marking

TEBAOFLEX PSY 2x1.5 PN-EN 60228 300/500 V CE

Delivery form: Heavy-duty export fumigated wooden drums or steel mine reels
Standard lengths: 500 m, 1,000 m or custom continuous shaft/reeling lengths
MOQ: 100 m (standard configurations) · 500 m (custom builds)
Lead time: 2–5 weeks ex-works
Incoterms: EXW, FCA, FOB, CIF, DAP

Technical documents

Downloads

PDFPSY 2x1.5 Flat High-Visibility Mining Shotfiring Cable – technical datasheet3 sizes · construction, technical data, approvals XLSXPSY 2x1.5 spec data (Excel)All 3 sizes with dimensions and data, for your BOM or quotation

Revision: 2026-10-24
Updated: 2026-10-24

FAQ

Questions engineers ask first

Not covered here? Send your drawing — an engineer replies within 2 business hours.

What governing standard and construction define PSY 2x1.5 (PSY 2x1.5 Flat High-Visibility Mining Shotfiring Cable)?

PSY 2x1.5 (PSY 2x1.5 Flat High-Visibility Mining Shotfiring Cable) is manufactured in accordance with PN-EN 60228 / IEC 60332-1-2 / GIG Barbara for 300/500 V duty over -25 to +70 °C. Its 3-layer construction comprises Parallel Conductors (2×1.5 mm²), Parallel Red & Green PVC Insulation (Y) and Flat High-Visibility Yellow Sheath (Y).

What is the minimum bending radius and operating temperature range for PSY 2x1.5?

The minimum bending radius for PSY 2x1.5 is 8 × OD across its continuous operating temperature range of -25 to +70 °C, ensuring mechanical and dielectric reliability in mining and heavy industrial service.

How are the concentric layers of PSY 2x1.5 arranged from inside to outside?

From inside to outside, the construction sequence is: (01) Parallel Conductors (2×1.5 mm²) (PN-EN 60228 Class 5 flexible bare annealed copper (≤26.6 Ω/km loop)); (02) Parallel Red & Green PVC Insulation (Y) (Color-coded Red and Green PVC cores laid parallel side-by-side); (03) Flat High-Visibility Yellow Sheath (Y) (2.5×5.0 mm flat yellow mining flame-retardant PVC jacket (LOI ≥ 28%, 3 kV test)).

What factory test certificates are supplied with PSY 2x1.5?

Every production drum of PSY 2x1.5 undergoes routine conductor resistance/continuity, high-voltage dielectric and dimensional testing per PN-EN 60228 / IEC 60332-1-2 / GIG Barbara, and is delivered with an EN 10204 3.1 factory test certificate.

Request a quote

Get an engineering quote for PSY 2x1.5

Your selection and application details are copied into the enquiry form below.

01Selected sizes

Use + Add next to a size or configuration.

02Reel & motion

Add your operating conditions here to include them in your enquiry.

Reel typeDrum core diameter (mm)Cable length on drum (m)Travel speed (m/min)Max. accelerationCycles per hourLength and quantityAmbient temperatureExposure (outdoor, water, oil, abrasion)Destination countryEquipment and operating conditions

03Message for our engineers

PSY 2x1.5 Flat High-Visibility Mining Shotfiring Cable

Selected sizes:


Reel & motion:
- Reel type: 
- Drum core diameter (mm): 
- Cable length on drum (m): 
- Travel speed (m/min): 
- Max. acceleration: 
- Cycles per hour: 
- Length and quantity: 
- Ambient temperature: 
- Exposure (outdoor, water, oil, abrasion): 
- Destination country: 
- Equipment and operating conditions:

Send via WhatsApp