1 / 5

Product

EMC-screened marine & offshore VFD cable IEC 60092-3530.6/1 kV – 1.8/3 kV (-40 to +90 °C)SHF1 / SHF2 Halogen-Free Outer Sheat

M2XCH-EMC & LKSM-EMC 0.6/1–1.8/3 kV Dual-Screened Shipboard Propulsion & VFD CableIEC 60092-353 — 0.6/1 kV – 1.8/3 kV — -40 to +90 °C Marine & Offshore Cable

M2XCH-EMC & LKSM-EMC 0.6/1–1.8/3 kV Dual-Screened Shipboard Propulsion & VFD Cable (IEC 60092-353) engineered for 0.6/1 kV – 1.8/3 kV service across -40 to +90 °C (min. bend radius 8 × OD).

Flame-retardant

EMC screen

Oil-resistant

Approved

Configuration

Order designation: M2XCH-EMC 3×35+3G6 VFD
Outer Ø ≈: 29.4 mm
Net weight ≈: 1,760 kg/km
Tensile rating ≈: 15.8 kN
Core / stranding: IEC 60228 Class 2/5 Cu/SnCu

All sizes (3)

Request a quote Datasheet WhatsApp info@tebaoflex.com

Engineering reply in 2 business hoursCut-to-length export drumsEN 10204 3.1 certificate per drum

Rated voltage: 0.6/1 kV – 1.8/3
Operating temp.: −40…+90 °C
Min. bend radius: 8 × OD
Core / conductor: Main Phase Condu
Outer protection: SHF1 / SHF2 Halo
Standard: IEC 60092-353

Typical values for this cable type, based on IEC 60092-353 / IEC 60092-360 SHF1 & SHF2 EMC Class — confirmed in the datasheet and quotation for your order.

Application fit

Is M2XCH-EMC & LKSM-EMC 0.6/1-1.8/3 KV right for your machine?

M2XCH-EMC & LKSM-EMC 0.6/1–1.8/3 kV Dual-Screened Shipboard Propulsion & VFD Cable (IEC 60092-353) engineered for 0.6/1 kV – 1.8/3 kV service across -40 to +90 °C (min. bend radius 8 × OD).

VFD inverter to AC motor screened feeder

Suitable

Symmetrical 3+3E split-earth geometry and dual 100% foil + copper braid screen contain PWM inverter common-mode currents.

Motor stator, traction & converter leads

Suitable

Low phase capacitance and transfer impedance prevent bearing currents and voltage reflection spikes on variable-speed motors.

Offshore platform & shipboard deck trays

Suitable

SHF2-MUD or IEEE 1580 Type P XL-CPE jacket resists oil-based drilling mud, ester fluids and marine weathering.

Drilling jumbo & rotary mast feed

Suitable

Qualified for high-power drawworks, top drives, mud pumps and dynamic-positioning (DP) thruster drives.

Festoon & line chain

Not suitable

Fixed VFD propulsion and rig feeder cable is not intended for high-speed crane festoon loops.

Use (N)3GRDC5G-J/O Festoon Cable

Typical machinesMarine & Offshore CableMarine Azimuth & Tunnel Thruster DrivesOffshore Drilling Drawworks & Mud PumpsDiesel-Electric & Hybrid Vessel PropulsionOffshore Deck Winch & Crane Inverter Feeds

Construction

Layer by layer

Shown: M2XCH-EMC & LKSM-EMC 0.6/1-1.8/3 KV (IEC 60092-353 / IEC 60092-360 SHF1 & SHF2 EMC Class) featuring main phase conductors (3×70 mm² xlpe), symmetrical split earth cores (3g10 mm²) and shf1 / shf2 halogen-free outer sheath (5-layer construction).

Schematic, not to scale — generated from the layer data

#	Layer	Material & reference
1	Main Phase Conductors (3×70 mm² XLPE)	Low-capacitance HF90 XLPE insulated phase cores (Brown, Black, Grey)
2	Symmetrical Split Earth Cores (3G10 mm²)	Three symmetrically placed Green/Yellow earth cores in outer interstices
3	100% Copper / Foil Tape Screen (1st EMC)	Overlapped metallic tape providing 100% high-frequency EMI containment
4	High-Density Copper Wire Braid (2nd EMC)	Low transfer-impedance copper wire braid screen and armour
5	SHF1 / SHF2 Halogen-Free Outer Sheath	Flame-retardant zero-halogen marine jacket (IEC 60092-360)

M2XCH-EMC & LKSM-EMC 0.6/1-1.8/3 KV — Standard Shipboard & Offshore Execution

Built to IEC 60092-353 / IEC 60092-360 SHF1 & SHF2 EMC Class with main phase conductors (3×70 mm² xlpe) and shf1 / shf2 halogen-free outer sheath

M2XCH-EMC & LKSM-EMC 0.6/1-1.8/3 KV — Custom Drum Length & Gland Kit

Available in custom continuous shipboard/offshore drum lengths or with marine EMC cable glands

M2XCH-EMC & LKSM-EMC 0.6/1-1.8/3 KV — Class & Routine Test Certified

Supplied with EN 10204 3.1 routine dielectric, conductor resistance & flame/fire test report

Technical data

Ratings & operating limits

Typical values: Typical values for this cable type, based on IEC 60092-353 / IEC 60092-360 SHF1 & SHF2 EMC Class. Values for your order are confirmed in the datasheet and quotation.

Electrical

Rated voltage / transmission duty: 0.6/1 kV – 1.8/3 kV (IEC 60092-353 / IEC 60092-360 SHF1 & SHF2 EMC Class)
Core / conductor construction: Main Phase Conductors (3×70 mm² XLPE) — Low-capacitance HF90 XLPE insulated phase cores (Brown, Black, Grey)
Primary dielectric / buffering: Symmetrical Split Earth Cores (3G10 mm²) — Three symmetrically placed Green/Yellow earth cores in outer interstices

Thermal

Continuous operating temperature: −40…+90 °C (shipboard & offshore duty)
Short-circuit / peak thermal rating: Verified thermal stability per IEC 60092-353 / IEC 60092-360 SHF1 & SHF2 EMC Class
Storage & transport temperature: −40…+80 °C on export wooden/steel drum

Mechanical

Outer protection / armouring: SHF1 / SHF2 Halogen-Free Outer Sheath — Flame-retardant zero-halogen marine jacket (IEC 60092-360)
Minimum bending radius: 8 × OD
Armour, screen & mechanical duty: High-Density Copper Wire Braid (2nd EMC) — Low transfer-impedance copper wire braid screen and armour

Resistance

Flame, fire & smoke performance: Qualified for marine flame-retardance and low-smoke zero-halogen / fire safety per IEC 60092-353 / IEC 60092-360 SHF1 & SHF2 EMC Class
Oil, drilling mud & seawater resistance: Resistant to marine fuel/lube oils, salt mist and offshore fluids per IEC 60092-353 / IEC 60092-360 SHF1 & SHF2 EMC Class
RoHS & REACH compliance: RoHS 2 (2011/65/EU + 2015/863) & REACH SVHC compliant

Reference standards

Governing standard: IEC 60092-353 / IEC 60092-360 SHF1 & SHF2 EMC Class
Environmental & test standards: IEC 60228 / IEC 60332-3-22 / IEC 60754 / IEC 61034 / EN 10204
Quality management & inspection: ISO 9001:2015 & EN 10204 3.1 factory routine inspection

Identification

Model designation: M2XCH-EMC & LKSM-EMC 0.6/1-1.8/3 KV
Sheath colour & metre marking: Continuous metre-marked black outer finish (SHF1 / SHF2 Halo)
Customs tariff (HS): 8544.49 / 8544.60 / 8544.70

Sizes

3 standard M2XCH-EMC & LKSM-EMC 0.6/1-1.8/3 KV shipboard & offshore configurations

Manufactured to IEC 60092-353 / IEC 60092-360 SHF1 & SHF2 EMC Class for shipboard, offshore platform, drilling rig and marine applications.

Dimensions, tensile load & weights
Order designation	Configuration	Core / stranding	Outer Ø ≈ mm	Net weight ≈ kg/km	Tensile rating kN ≈	Min. bend R mm
M2XCH-EMC & LKSM-EMC 0.6/1-1.8/3 KV Construction Schedule (−40…+90 °C)
M2XCH-EMC 3×35+3G6 VFD	3 × 35 + 3G6 mm² (3+3E EMC)	IEC 60228 Class 2/5 Cu/SnCu	29.4	1,760	15.8	235
M2XCH-EMC 3×70+3G10 VFD	3 × 70 + 3G10 mm² (3+3E EMC)	IEC 60228 Class 2/5 Cu/SnCu	37.8	3,190	31.5	305
M2XCH-EMC 3×120+3G16 VFD	3 × 120 + 3G16 mm² (3+3E EMC)	IEC 60228 Class 2/5 Cu/SnCu	46.5	5,120	54.0	375

Typical values for this cable type; dimensions and weights for your order are confirmed in the quotation.
Custom core cross-sections, pair/fibre counts, armour grades and factory drum lengths available per IEC 60092-353 / IEC 60092-360 SHF1 & SHF2 EMC Class.

Electrical, optical & thermal parameters
Configuration	Max. DC R₂₀ / Atten. Ω/km or dB/km	Rating / Impedance	Operating temp.
3 × 35 + 3G6 mm² (3+3E EMC)	0.52	0.6/1 kV – 1.8/3 kV (138 A VFD)	−40…+90 °C
3 × 70 + 3G10 mm² (3+3E EMC)	0.27	0.6/1 kV – 1.8/3 kV (215 A VFD)	−40…+90 °C
3 × 120 + 3G16 mm² (3+3E EMC)	0.15	0.6/1 kV – 1.8/3 kV (305 A VFD)	−40…+90 °C

Every production length undergoes routine conductor DC resistance, high-voltage dielectric or OTDR continuity and dimensional verification.

Quality & approvals

Testing & inspection

Routine tests on every production length, sample and type tests per batch — documented on an EN 10204 3.1 inspection certificate.

ConductorClass 5 stranding
Spark test100 % in-line
Lay-upCores, earth, fillers
SheathingInner, braid / screen, outer
Electrical testsAC voltage, resistance
DimensionsOD, wall thickness
Inspection documents & dispatchDrum & dispatch

Testing & inspection	Test value / reference	Frequency
Routine tests
Conductor resistance, continuity & dimensional verification (IEC 60092-353 / IEC 60092-360 SHF1 & SHF2 EMC Class)	DC resistance at 20 °C / optical attenuation and outer diameter within IEC 60092-353 / IEC 60092-360 SHF1 & SHF2 EMC Class tolerances	Every manufactured drum length
High-voltage dielectric & insulation resistance test (IEC 60092-353 / IEC 60092-360 SHF1 & SHF2 EMC Class)	Zero dielectric breakdown and verified insulation resistance for 0.6/1 kV – 1.8/3 kV rating	Every manufactured drum length
Sample tests
Flame, fire integrity, oil/mud & mechanical qualification (IEC 60092-353 / IEC 60092-360 SHF1 & SHF2 EMC Class)	Verified flame/fire performance, fluid resistance and thermal stability across −40…+90 °C	Type qualification & periodic lot audit

Inspection certificate

Issued with every drum, listing the routine test results for that length.

Product approvals

IEC 60092-353 CompliantEN 10204 3.1 Factory Test CertificateCE, RoHS 2 (2011/65/EU) & REACH

Company certificates

ISO 9001ISO 14001ISO 45001VDE marks approvalUL / cULCE · LVD / EMC

Marking & supply

Ordering & delivery

Sheath marking

TEBAOFLEX M2XCH-EMC & LKSM-EMC 0.6/1-1.8/3 KV IEC 60092-353 0.6/1 kV – 1.8/3 kV CE

Delivery form: Heavy-duty export fumigated wooden drums or steel marine reels
Standard lengths: 500 m, 1,000 m or custom continuous shipboard/offshore lengths
MOQ: 100 m (standard configurations) · 500 m (custom builds)
Lead time: 2–5 weeks ex-works
Incoterms: EXW, FCA, FOB, CIF, DAP

Technical documents

Downloads

PDFM2XCH-EMC & LKSM-EMC 0.6/1–1.8/3 kV Dual-Screened Shipboard Propulsion – technical datasheet3 sizes · construction, technical data, approvals XLSXM2XCH-EMC & LKSM-EMC 0.6/1-1.8/3 KV spec data (Excel)All 3 sizes with dimensions and data, for your BOM or quotation

Revision: 2026-10-25
Updated: 2026-10-25

FAQ

Questions engineers ask first

Not covered here? Send your drawing — an engineer replies within 2 business hours.

What governing standard and construction define M2XCH-EMC & LKSM-EMC 0.6/1-1.8/3 KV (M2XCH-EMC & LKSM-EMC 0.6/1–1.8/3 kV Dual-Screened Shipboard Propulsion & VFD Cable)?

M2XCH-EMC & LKSM-EMC 0.6/1-1.8/3 KV (M2XCH-EMC & LKSM-EMC 0.6/1–1.8/3 kV Dual-Screened Shipboard Propulsion & VFD Cable) is manufactured in accordance with IEC 60092-353 / IEC 60092-360 SHF1 & SHF2 EMC Class for 0.6/1 kV – 1.8/3 kV service over -40 to +90 °C. Its 5-layer construction comprises main phase conductors (3×70 mm² xlpe), symmetrical split earth cores (3g10 mm²) and shf1 / shf2 halogen-free outer sheath.

What is the minimum bending radius and operating temperature range for M2XCH-EMC & LKSM-EMC 0.6/1-1.8/3 KV?

The minimum bending radius for M2XCH-EMC & LKSM-EMC 0.6/1-1.8/3 KV is 8 × OD across its continuous operating temperature range of -40 to +90 °C, ensuring mechanical and dielectric reliability in shipboard and offshore service.

How are the concentric layers of M2XCH-EMC & LKSM-EMC 0.6/1-1.8/3 KV arranged from inside to outside?

From inside to outside, the construction sequence is: (01) Main Phase Conductors (3×70 mm² XLPE) — Low-capacitance HF90 XLPE insulated phase cores (Brown, Black, Grey); (02) Symmetrical Split Earth Cores (3G10 mm²) — Three symmetrically placed Green/Yellow earth cores in outer interstices; (03) 100% Copper / Foil Tape Screen (1st EMC) — Overlapped metallic tape providing 100% high-frequency EMI containment; (04) High-Density Copper Wire Braid (2nd EMC) — Low transfer-impedance copper wire braid screen and armour; (05) SHF1 / SHF2 Halogen-Free Outer Sheath — Flame-retardant zero-halogen marine jacket (IEC 60092-360).

What factory test certificates are supplied with M2XCH-EMC & LKSM-EMC 0.6/1-1.8/3 KV?

Every production drum of M2XCH-EMC & LKSM-EMC 0.6/1-1.8/3 KV undergoes routine conductor resistance/continuity, high-voltage dielectric and dimensional testing per IEC 60092-353 / IEC 60092-360 SHF1 & SHF2 EMC Class, and is delivered with an EN 10204 3.1 factory test certificate.

Request a quote

Get an engineering quote for M2XCH-EMC & LKSM-EMC 0.6/1-1.8/3 KV

Your selection and application details are copied into the enquiry form below.

01Selected sizes

Use + Add next to a size or configuration.

02Reel & motion

Add your operating conditions here to include them in your enquiry.

Reel typeDrum core diameter (mm)Cable length on drum (m)Travel speed (m/min)Max. accelerationCycles per hourLength and quantityAmbient temperatureExposure (outdoor, water, oil, abrasion)Destination countryEquipment and operating conditions

03Message for our engineers

M2XCH-EMC & LKSM-EMC 0.6/1–1.8/3 kV Dual-Screened Shipboard Propulsion & VFD Cable

Selected sizes:


Reel & motion:
- Reel type: 
- Drum core diameter (mm): 
- Cable length on drum (m): 
- Travel speed (m/min): 
- Max. acceleration: 
- Cycles per hour: 
- Length and quantity: 
- Ambient temperature: 
- Exposure (outdoor, water, oil, abrasion): 
- Destination country: 
- Equipment and operating conditions:

Send via WhatsApp