1 / 5

Product

AS/NZS 3560.1 LV ABC AS/NZS 3560.10.6/1 kV−25…+90 °C

AS/NZS 3560.1 0.6/1 kV X-90 XLPE Low-Voltage Aerial Bundled CableAS/NZS 3560.1 · 0.6/1 kV · -25 °C to +90 °C industrial LV ABC AS-NZS 3560 construction

AS/NZS 3560.1 0.6/1 kV X-90 XLPE Insulated Low-Voltage Aerial Bundled Cable engineered to AS/NZS 3560.1 for 0.6/1 kV service across -25 °C to +90 °C, featuring stranded aluminum conductor and xlpe x-90 core insulation with minimum bending radius 12 × OD.

Approved

Outdoor & humid

Ozone, UV & moisture

Nominal area

Order designation: LV ABC AS-NZS 3560 240 mm²
Outer Ø ≈: 21.8 mm
Total weight ≈: 885 kg/km
Rated tensile ≈: 84.5 kN
Stranding: 26/3.44 + 7/2.68

All sizes (10)

Request a quote Datasheet WhatsApp info@tebaoflex.com

Engineering reply in 2 business hoursCut-to-length export drumsEN 10204 3.1 certificate per drum

Rated voltage: 0.6/1 kV
Operating temp.: −25…+90 °C
Min. bend radius: 12 × OD
Conductor: aluminum conduct
Outer layer: XLPE X-90 core
Standard: AS

Typical values for this cable type, based on AS/NZS 3560.1 — confirmed in the datasheet and quotation for your order.

Application fit

Is LV ABC (AS/NZS 3560) right for your machine?

Fixed installation

Suitable

Engineered and verified for fixed service in accordance with AS/NZS 3560.1.

Switchgear & control cabinet wiring

Suitable

Suitable for switchgear, control panels and equipment terminations within 12 × OD bend radius.

TBM gantry & advancing tunnel reel

With conditions

Use mechanical conduit or armoured protection where exposed to rock fall or crushing loads.

Motorised monospiral reel

Not suitable

Not designed for high-speed monospiral crane reeling; select a dedicated reeling cable.

NSHTOU Reeling Cable

Typical machinesRenewable Energy & EV ChargingHigh-Voltage Grid & Substation InterconnectsWind, Solar & Hydro Power EvacuationUtility Overhead & Underground DistributionIndustrial Power InfrastructureCommercial & Residential Building Distribution

Construction

Layer by layer

Shown: LV ABC AS-NZS 3560 (AS/NZS 3560.1) with stranded aluminum conductor, xlpe x-90 core insulation and xlpe x-90 core insulation (2-layer construction).

Schematic, not to scale — generated from the layer data

#	Layer	Material & reference
1	Stranded aluminum conductor	High-conductivity aluminum conductor per AS/NZS 3560.1AS/NZS 3560.1
2	XLPE X-90 core insulation	Extruded XLPE X-90 dielectric (individual core / group layer)AS/NZS 3560.1

LV ABC AS-NZS 3560 — Standard Execution

Built to AS/NZS 3560.1 with stranded aluminum conductor and xlpe x-90 core insulation

LV ABC AS-NZS 3560 — Custom Cross-Sections

Full range of metric mm² and AWG/kcmil conductor sizes per AS/NZS 3560.1

LV ABC AS-NZS 3560 — Export Drum Supply

Supplied with EN 10204 3.1 routine dielectric & conductor resistance test certificate

Technical data

Ratings & operating limits

Typical values: Typical values for this cable type, based on AS/NZS 3560.1. Values for your order are confirmed in the datasheet and quotation.

Electrical

Rated voltage / duty: 0.6/1 kV (AS/NZS 3560.1)
Conductor construction: Stranded aluminum conductor — High-conductivity aluminum conductor per AS/NZS 3560.1
Primary insulation / dielectric: XLPE X-90 core insulation — Extruded XLPE X-90 dielectric (individual core / group layer)

Thermal

Continuous operating temperature: −25…+90 °C per AS/NZS 3560.1
Short-circuit / peak thermal limit: +160 °C to +250 °C (5 s adiabatic limit depending on dielectric class)
Minimum installation temperature: −5 °C (thermoplastic) / −25 °C (cross-linked or elastomer) / −40 °C (metallic)

Mechanical

Outer protection / covering: XLPE X-90 core insulation — Extruded XLPE X-90 dielectric (individual core / group layer)
Minimum bending radius: 12 × OD (installed / static routing)
Layer count & geometry: 2 concentric/structural layers verified by cross-section inspection

Resistance

Environmental & chemical durability: Engineered for industrial service in accordance with AS/NZS 3560.1
RoHS & REACH compliance: RoHS 2 (2011/65/EU + 2015/863) & REACH SVHC compliant

Reference standards

Governing product standard: AS/NZS 3560.1
Quality management & inspection: ISO 9001:2015 & EN 10204 3.1 factory routine inspection

Identification

Model designation: LV ABC AS-NZS 3560
Customs tariff (HS): 8544.49 / 8544.60 / 7614.10

Sizes

10 standard LV ABC AS-NZS 3560 overhead conductor sizes

Manufactured to AS/NZS 3560.1 in standard cross-sections from 50 mm² to 630 mm² (and North American AWG/kcmil code words).

Dimensions, stranding, breaking load & weights
Order designation	Nominal area	Stranding	Outer Ø ≈ mm	Weight ≈ kg/km	Rated tensile kN ≈	Min. sheave R mm
LV ABC AS-NZS 3560 Standard Transmission & Distribution Schedule (−25…+90 °C)
LV ABC AS-NZS 3560 50 mm²	50 mm²	7/3.00 mm	9.0	138	14.5	180
LV ABC AS-NZS 3560 95 mm²	95 mm²	19/2.52 mm	12.6	262	28.2	252
LV ABC AS-NZS 3560 120 mm²	120 mm²	19/2.85 mm	14.3	334	36.4	286
LV ABC AS-NZS 3560 150 mm²	150 mm²	26/2.70 + 7/2.10	17.1	546	53.8	342
LV ABC AS-NZS 3560 185 mm²	185 mm²	26/3.00 + 7/2.33	19.0	674	65.2	380
LV ABC AS-NZS 3560 240 mm²	240 mm²	26/3.44 + 7/2.68	21.8	885	84.5	436
LV ABC AS-NZS 3560 300 mm²	300 mm²	26/3.86 + 7/3.00	24.5	1,110	104.2	490
LV ABC AS-NZS 3560 400 mm²	400 mm²	54/3.08 + 7/3.08	27.7	1,432	126.0	554
LV ABC AS-NZS 3560 500 mm²	500 mm²	54/3.44 + 7/3.44	31.0	1,790	156.5	620
LV ABC AS-NZS 3560 630 mm²	630 mm²	54/3.86 + 19/2.32	34.8	2,245	194.0	696

Typical values for this cable type; dimensions and weights for your order are confirmed in the quotation.
Custom kcmil/code-word sizes, grease-filled corrosion protection and non-specular surface finishes available per AS/NZS 3560.1.

DC resistance & continuous current ratings
Nominal area	Max. DC R₂₀ Ω/km	Continuous current A ≈	Operating temp.
50 mm²	0.578	210	−25…+90 °C
95 mm²	0.304	320	−25…+90 °C
150 mm²	0.192	435	−25…+90 °C
240 mm²	0.119	590	−25…+90 °C
400 mm²	0.072	820	−25…+90 °C
630 mm²	0.046	1,080	−25…+90 °C

Ampacity calculated per IEEE 738 (0.6 m/s wind, 40 °C ambient, 0.5 solar absorptivity / emissivity).

Quality & approvals

Testing & inspection

Routine tests on every production length, sample and type tests per batch — documented on an EN 10204 3.1 inspection certificate.

ConductorClass 5 stranding
Spark test100 % in-line
Lay-upCores, earth, fillers
SheathingInner, braid / screen, outer
Electrical testsAC voltage, resistance
DimensionsOD, wall thickness
Inspection documents & dispatchDrum & dispatch

Testing & inspection	Test value / reference	Frequency
Routine tests
Conductor DC resistance & dimensional verification (AS/NZS 3560.1)	DC resistance at 20 °C and geometry within AS/NZS 3560.1 class limits	Every manufactured drum / spool
Routine dielectric / spark / structural integrity test (AS/NZS 3560.1)	Zero breakdown or structural defect over full production length	Every manufactured drum / spool
Sample tests
Thermal aging, mechanical & material qualification (AS/NZS 3560.1)	Full compliance with AS/NZS 3560.1 across −25…+90 °C	Type qualification & periodic sample audit

Inspection certificate

Issued with every drum, listing the routine test results for that length.

Product approvals

AS CompliantEN 10204 3.1 Routine Test CertificateCE, RoHS 2 (2011/65/EU) & REACH

Company certificates

ISO 9001ISO 14001ISO 45001VDE marks approvalUL / cULCE · LVD / EMC

Marking & supply

Ordering & delivery

Sheath marking

TEBAOFLEX LV ABC AS-NZS 3560 <size> AS 0.6/1 kV CE

Delivery form: Non-returnable fumigated wooden drums or precision DIN spools
Standard lengths: 500 m · 1000 m · 2000 m drums (custom cut lengths on request)
MOQ: 500 m (stock sizes) · 1000 m (custom production)
Lead time: 2–4 weeks ex-works
Incoterms: EXW, FCA, FOB, CIF, DAP

Technical documents

Downloads

PDFAS/NZS 3560.1 0.6/1 kV X-90 XLPE Insulated Low-Voltage Aerial – technical datasheet10 sizes · construction, technical data, approvals XLSXLV ABC AS-NZS 3560 spec data (Excel)All 10 sizes with dimensions and data, for your BOM or quotation

Revision: 2026-10-21
Updated: 2026-10-21

FAQ

Questions engineers ask first

Not covered here? Send your drawing — an engineer replies within 2 business hours.

What governing standard and construction define LV ABC AS-NZS 3560 (AS/NZS 3560.1 0.6/1 kV X-90 XLPE Insulated Low-Voltage Aerial Bundled Cable (ABC))?

LV ABC AS-NZS 3560 (AS/NZS 3560.1 0.6/1 kV X-90 XLPE Insulated Low-Voltage Aerial Bundled Cable (ABC)) is manufactured in accordance with AS/NZS 3560.1 for 0.6/1 kV service over -25 °C to +90 °C. Its 2-layer construction comprises stranded aluminum conductor, xlpe x-90 core insulation.

What is the minimum bending radius and installation temperature for LV ABC AS-NZS 3560?

The minimum installed bending radius for LV ABC AS-NZS 3560 is 12 × OD across its continuous operating temperature range of -25 °C to +90 °C, ensuring mechanical and dielectric stability without conductor or insulation strain.

How are the concentric layers of LV ABC AS-NZS 3560 arranged from inside to outside?

From inside to outside, the construction sequence is: (01) Stranded aluminum conductor (High-conductivity aluminum conductor per AS/NZS 3560.1); (02) XLPE X-90 core insulation (Extruded XLPE X-90 dielectric (individual core / group layer)).

What factory test certificates are supplied with LV ABC AS-NZS 3560?

Every production drum or spool of LV ABC AS-NZS 3560 undergoes routine conductor DC resistance, dimensional and dielectric/integrity testing per AS/NZS 3560.1, and is delivered with an EN 10204 3.1 factory test certificate.

Request a quote

Get an engineering quote for LV ABC (AS/NZS 3560)

Your selection and application details are copied into the enquiry form below.

01Selected sizes

Use + Add next to a size or configuration.

02Reel & motion

Add your operating conditions here to include them in your enquiry.

Reel typeDrum core diameter (mm)Cable length on drum (m)Travel speed (m/min)Max. accelerationCycles per hourLength and quantityAmbient temperatureExposure (outdoor, water, oil, abrasion)Destination countryEquipment and operating conditions

03Message for our engineers

LV ABC (AS/NZS 3560) AS/NZS 3560.1 0.6/1 kV X-90 XLPE Low-Voltage Aerial Bundled Cable

Selected sizes:


Reel & motion:
- Reel type: 
- Drum core diameter (mm): 
- Cable length on drum (m): 
- Travel speed (m/min): 
- Max. acceleration: 
- Cycles per hour: 
- Length and quantity: 
- Ambient temperature: 
- Exposure (outdoor, water, oil, abrasion): 
- Destination country: 
- Equipment and operating conditions:

Send via WhatsApp