1 / 5

Product

submersible aquaculture, pump & marine rubber cable DIN VDE 0250 / IEC 60502-11.8/3 kV (0.6/1 kV) (-40 to +90 °C)Subsea / Marine Outer Protective She

Heavy-Duty Submersible Mining Power CableDIN VDE 0250 / IEC 60502-1 — 1.8/3 kV (0.6/1 kV) — -40 to +90 °C Subsea & Marine Cable

Heavy-Duty Submersible Mining Power Cable featuring single-mode / multi-mode optical unit and subsea / marine outer protective sheath (DIN VDE 0250 / IEC 60502-1, 1.8/3 kV (0.6/1 kV), -40 to +90 °C, min. bend radius 6 × OD).

Water-resistant

Oil-resistant

Outdoor & humid

Approved

Configuration

Order designation: Heavy Submersible Mining Power Cable Hybrid 4G2.
Outer Ø ≈: 14.6 mm
Net weight ≈: 285 kg/km
Max. pulling ≈: 18.0 kN
Core / stranding: Class 5 SnCu + Aramid Braid + Subsea PUR

All sizes (3)

Request a quote Datasheet WhatsApp info@tebaoflex.com

Engineering reply in 2 business hoursCut-to-length export drumsEN 10204 3.1 certificate per drum

Rated voltage: 1.8/3 kV (0.6/1
Operating temp.: −40…+90 °C
Min. bend radius: 6 × OD
Core / conductor: Single-Mode / Mu
Outer protection: Subsea / Marine
Standard: DIN VDE 0250 / I

Typical values for this cable type, based on DIN VDE 0250 Heavy-Duty Submersible Mining & Dredging Power Cable Standard — confirmed in the datasheet and quotation for your order.

Application fit

Is Heavy Submersible Mining Power Cable right for your machine?

Immersion & wet locations

Suitable

Cross-linked EPDM, polychloroprene or subsea PUR elastomer compounds provide low water absorption and AD8 permanent immersion integrity.

Free-hanging vertical run

Suitable

IEC 60228 Class 5 flexible copper conductors support suspended vertical riser drops in deep wells, sea cages and submersible pump shafts.

Fixed installation

Suitable

Installs cleanly along floating fish-farm walkways, mooring collars, hatchery basins and subsea pumping stations.

Offshore platform & shipboard deck trays

Suitable

Withstands salt mist, ozone, UV exposure, fish oil and mechanical wave flexing in coastal and offshore aquaculture farms.

Motorised monospiral reel

Not suitable

Submersible pump and aquaculture rubber cables are not intended for high-speed horizontal crane reeling drums.

Use RT-PUR-HF Reeling Cable

Typical machinesUnderwater & Ocean ExplorationOffshore & Coastal Aquaculture Cage Power DistributionSubmersible Aerators, Blowers & Clean-Water Well PumpsWRAS / KTW Hatchery & Potable Water Pumping SystemsSubmersible Pool, Reservoir & Tank Cleaning Robots

Construction

Layer by layer

Shown: Heavy Submersible Mining Power Cable (DIN VDE 0250 Heavy-Duty Submersible Mining & Dredging Power Cable Standard) featuring single-mode / multi-mode optical unit, power & control copper conductors and subsea / marine outer protective sheath (3-layer construction).

Heavy Submersible Mining Power Cable — stepped horizontal cutaway showing Single-Mode / Multi-Mode Optical Unit and Su — Layer cutaway

#	Layer	Material & reference
1	Single-Mode / Multi-Mode Optical Unit	Hermetic stainless-steel tube / tight-buffered optical unit
2	Power & Control Copper Conductors	Stranded copper conductors with High-modulus ethylene-propylene rubber (HEPR) insulation
3	Subsea / Marine Outer Protective Sheath	Black hydrolysis- & abrasion-resistant marine Polyurethane (PUR) outer sheath

Heavy Submersible Mining Power Cable — Standard Subsea & Marine Execution

Built to DIN VDE 0250 Heavy-Duty Submersible Mining & Dredging Power Cable Standard with single-mode / multi-mode optical unit and subsea / marine outer protective sheath

Heavy Submersible Mining Power Cable — Custom Winch Length / Molded Termination

Available on continuous export winch drums or factory-terminated with subsea wet-mate / mechanical sockets

Heavy Submersible Mining Power Cable — Hydrostatic & Routine Certified

Supplied with EN 10204 3.1 routine dielectric, conductor/optical continuity & hydrostatic qualification report

Technical data

Ratings & operating limits

Typical values: Typical values for this cable type, based on DIN VDE 0250 Heavy-Duty Submersible Mining & Dredging Power Cable Standard. Values for your order are confirmed in the datasheet and quotation.

Electrical

Rated voltage / operating system: 1.8/3 kV (0.6/1 kV) (DIN VDE 0250 Heavy-Duty Submersible Mining & Dredging Power Cable Standard)
Core / conductor construction: Single-Mode / Multi-Mode Optical Unit — Hermetic stainless-steel tube / tight-buffered optical unit
Primary dielectric / optical buffer: Power & Control Copper Conductors — Stranded copper conductors with High-modulus ethylene-propylene rubber (HEPR) insulation

Thermal

Continuous operating temperature: −40…+90 °C (submerged seawater & topside deck service)
Hydrostatic & thermal cycling endurance: Verified cold-bend and wet dielectric stability across −40…+90 °C per DIN VDE 0250 Heavy-Duty Submersible Mining & Dredging Power Cable Standard
Storage & transport temperature: −40…+80 °C on export wooden/steel cable drum

Mechanical

Outer jacket / sheath protection: Subsea / Marine Outer Protective Sheath — Black hydrolysis- & abrasion-resistant marine Polyurethane (PUR) outer sheath
Minimum bending radius: 6 × OD
Reinforcement / screen / bedding layer: Power & Control Copper Conductors — Stranded copper conductors with High-modulus ethylene-propylene rubber (HEPR) insulation

Resistance

Seawater, hydrolysis & oil resistance: Resistant to permanent seawater immersion, hydrolysis, hydraulic oil and bio-fouling per DIN VDE 0250 Heavy-Duty Submersible Mining & Dredging Power Cable Standard
Hydrostatic pressure & water blocking: Radial and longitudinal water-blocking integrity verified per DIN VDE 0250 Heavy-Duty Submersible Mining & Dredging Power Cable Standard
RoHS & REACH compliance: RoHS 2 (2011/65/EU + 2015/863) & REACH SVHC compliant

Reference standards

Governing standard: DIN VDE 0250 Heavy-Duty Submersible Mining & Dredging Power Cable Standard
Subsea & conductor qualification standards: IEC 60228 / DNV-ST-E402 / ISO 13628-5 / IEC 60794 / EN 10204
Quality management & inspection: ISO 9001:2015 & EN 10204 3.1 factory routine inspection

Identification

Model designation: Heavy Submersible Mining Power Cable
Sheath colour & metre marking: Continuous metre-marked black outer finish (Subsea / Marine )
Customs tariff (HS): 8544.49 / 8544.60 / 8544.70

Sizes

3 standard Heavy Submersible Mining Power Cable configurations

Manufactured to DIN VDE 0250 Heavy-Duty Submersible Mining & Dredging Power Cable Standard for subsea robotics, ROV umbilicals, marine aquaculture and offshore sensor applications.

Dimensions, tensile load & weights
Order designation	Configuration	Core / stranding	Outer Ø ≈ mm	Net weight ≈ kg/km	Max. pulling kN ≈	Min. bend R mm
Heavy Submersible Mining Power Cable Construction Schedule (−40…+90 °C)
Heavy Submersible Mining Power Cable Hybrid 4G2.	4G2.5 mm² Power + 4×SM + 2×2×0.5	Class 5 SnCu + Aramid Braid + Subsea PUR	14.6	285	18.0	90
Heavy Submersible Mining Power Cable Hybrid 4G6+	4G6.0 mm² Power + 4×SM/MM + 4×2×0.5	Class 5 SnCu + Aramid Braid + Subsea PUR	19.2	540	32.0	120
Heavy Submersible Mining Power Cable Hybrid 4G16	4G16 mm² Power + 8×SM/MM + 4×2×0.75	Class 5 SnCu + Heavy Aramid + Subsea PUR	26.5	1,120	55.0	165

Typical values for this cable type; dimensions and weights for your order are confirmed in the quotation.
Custom core counts, optical fiber channels, wet-mate terminations and continuous winch lengths available per DIN VDE 0250 Heavy-Duty Submersible Mining & Dredging Power Cable Standard.

Electrical, optical & thermal parameters
Configuration	Max. DC R₂₀ Ω/km	Rating / Impedance / Load	Operating temp.
4G2.5 mm² Power + 4×SM + 2×2×0.5	7.98	1.8/3 kV (0.6/1 kV) · 18 kN Tensile	−40…+90 °C
4G6.0 mm² Power + 4×SM/MM + 4×2×0.5	3.30	1.8/3 kV (0.6/1 kV) · 32 kN Tensile	−40…+90 °C
4G16 mm² Power + 8×SM/MM + 4×2×0.75	1.21	1.8/3 kV (0.6/1 kV) · 55 kN Tensile	−40…+90 °C

Every production length undergoes routine conductor DC resistance / OTDR optical attenuation, AC dielectric and dimensional verification.

Quality & approvals

Testing & inspection

Routine tests on every production length, sample and type tests per batch — documented on an EN 10204 3.1 inspection certificate.

ConductorClass 5 stranding
Spark test100 % in-line
Lay-upCores, earth, fillers
SheathingInner, braid / screen, outer
Electrical testsAC voltage, resistance
DimensionsOD, wall thickness
Inspection documents & dispatchDrum & dispatch

Testing & inspection	Test value / reference	Frequency
Routine tests
Conductor DC resistance / OTDR optical & dimensional check (DIN VDE 0250 Heavy-Duty Submersible Mining & Dredging Power Cable Standard)	DC resistance at 20 °C, optical attenuation and wall thickness within DIN VDE 0250 Heavy-Duty Submersible Mining & Dredging Power Cable Standard limits	Every manufactured drum length
AC high-voltage dielectric & insulation resistance test (DIN VDE 0250 Heavy-Duty Submersible Mining & Dredging Power Cable Standard)	Zero dielectric breakdown and verified wet insulation resistance for 1.8/3 kV (0.6/1 kV) rating	Every manufactured drum length
Sample tests
Hydrostatic pressure, tensile load & seawater immersion qualification (DIN VDE 0250 Heavy-Duty Submersible Mining & Dredging Power Cable Standard)	Verified hydrostatic pressure integrity, breaking load and flex endurance across −40…+90 °C	Type qualification & periodic lot audit

Inspection certificate

Issued with every drum, listing the routine test results for that length.

Product approvals

DIN VDE 0250 / IEC 60502-1 CompliantEN 10204 3.1 Factory Test CertificateCE, RoHS 2 (2011/65/EU) & REACH

Company certificates

ISO 9001ISO 14001ISO 45001VDE marks approvalUL / cULCE · LVD / EMC

Marking & supply

Ordering & delivery

Sheath marking

TEBAOFLEX Heavy Submersible Mining Power Cable DIN VDE 0250 / IEC 60502-1 1.8/3 kV (0.6/1 kV) CE

Delivery form: Heavy-duty export fumigated wooden drums, steel winch reels or pre-terminated subsea assemblies
Standard lengths: 500 m, 1,000 m, 3,000 m continuous winch lengths or custom cut-to-length subsea jumpers
MOQ: 100 m (standard configurations) · 300 m (custom subsea builds)
Lead time: 2–4 weeks ex-works
Incoterms: EXW, FCA, FOB, CIF, DAP

Technical documents

Downloads

PDFHeavy-Duty Submersible Mining Power Cable – technical datasheet3 sizes · construction, technical data, approvals XLSXHeavy Submersible Mining Power Cable spec data (Excel)All 3 sizes with dimensions and data, for your BOM or quotation

Revision: 2026-10-29
Updated: 2026-10-29

FAQ

Questions engineers ask first

Not covered here? Send your drawing — an engineer replies within 2 business hours.

What governing standard and construction define Heavy Submersible Mining Power Cable (Heavy-Duty Submersible Mining Power Cable)?

Heavy Submersible Mining Power Cable (Heavy-Duty Submersible Mining Power Cable) is manufactured in accordance with DIN VDE 0250 Heavy-Duty Submersible Mining & Dredging Power Cable Standard for 1.8/3 kV (0.6/1 kV) subsea,ROV and marine aquaculture service over -40 to +90 °C. Its 3-layer construction comprises single-mode / multi-mode optical unit, power & control copper conductors and subsea / marine outer protective sheath.

What is the minimum bending radius and operating temperature range for Heavy Submersible Mining Power Cable?

The minimum bending radius for Heavy Submersible Mining Power Cable is 6 × OD across its continuous operating temperature range of -40 to +90 °C, ensuring mechanical flex endurance and hydrostatic reliability in subsea winches, TMS cages and aquaculture installations.

How are the concentric layers of Heavy Submersible Mining Power Cable arranged from inside to outside?

From inside to outside, the construction sequence is: (01) Single-Mode / Multi-Mode Optical Unit — Hermetic stainless-steel tube / tight-buffered optical unit; (02) Power & Control Copper Conductors — Stranded copper conductors with High-modulus ethylene-propylene rubber (HEPR) insulation; (03) Subsea / Marine Outer Protective Sheath — Black hydrolysis- & abrasion-resistant marine Polyurethane (PUR) outer sheath.

What factory test certificates are supplied with Heavy Submersible Mining Power Cable?

Every production drum of Heavy Submersible Mining Power Cable undergoes routine conductor DC resistance / optical OTDR continuity, AC high-voltage dielectric and dimensional testing per DIN VDE 0250 Heavy-Duty Submersible Mining & Dredging Power Cable Standard, and is delivered with an EN 10204 3.1 factory test certificate.

Request a quote

Get an engineering quote for Heavy Submersible Mining Power Cable

Your selection and application details are copied into the enquiry form below.

01Selected sizes

Use + Add next to a size or configuration.

02Reel & motion

Add your operating conditions here to include them in your enquiry.

Reel typeDrum core diameter (mm)Cable length on drum (m)Travel speed (m/min)Max. accelerationCycles per hourLength and quantityAmbient temperatureExposure (outdoor, water, oil, abrasion)Destination countryEquipment and operating conditions

03Message for our engineers

Heavy-Duty Submersible Mining Power Cable

Selected sizes:


Reel & motion:
- Reel type: 
- Drum core diameter (mm): 
- Cable length on drum (m): 
- Travel speed (m/min): 
- Max. acceleration: 
- Cycles per hour: 
- Length and quantity: 
- Ambient temperature: 
- Exposure (outdoor, water, oil, abrasion): 
- Destination country: 
- Equipment and operating conditions:

Send via WhatsApp