1 / 5

Product

submersible aquaculture, pump & marine rubber cable IEC 60502-1 / AS/NZS 50001,000 V (-40 to +90 °C)Subsea / Marine Outer Protective She

P7370-SP 1000V Heavy Duty XLPE Flat Submersible CableIEC 60502-1 / AS/NZS 5000 — 1,000 V — -40 to +90 °C Subsea & Marine Cable

P7370-SP 1000V Heavy Duty XLPE Flat Submersible Cable featuring flexible stranded copper conductors (3 cores) and subsea / marine outer protective sheath (IEC 60502-1 / AS/NZS 5000, 1,000 V, -40 to +90 °C, min. bend radius 6 × OD).

Water-resistant

Oil-resistant

Outdoor & humid

Approved

Configuration

Order designation: P7370-SP 1000V Flat XLPE 4G4.0 mm²
Outer Ø ≈: 14.2 mm
Net weight ≈: 340 kg/km
Max. pulling ≈: 3.2 kN
Core / stranding: IEC 60228 Class 5 Cu/SnCu

All sizes (3)

Request a quote Datasheet WhatsApp info@tebaoflex.com

Engineering reply in 2 business hoursCut-to-length export drumsEN 10204 3.1 certificate per drum

Rated voltage: 1,000 V
Operating temp.: −40…+90 °C
Min. bend radius: 6 × OD
Core / conductor: Flexible Strande
Outer protection: Subsea / Marine
Standard: IEC 60502-1 / AS

Typical values for this cable type, based on IEC 60502-1 & AS/NZS 5000.1 Heavy-Duty XLPE Flat Submersible Pump Specification — confirmed in the datasheet and quotation for your order.

Application fit

Is P7370-SP 1000V Flat XLPE right for your machine?

Immersion & wet locations

Suitable

Cross-linked EPDM, polychloroprene or subsea PUR elastomer compounds provide low water absorption and AD8 permanent immersion integrity.

Free-hanging vertical run

Suitable

IEC 60228 Class 5 flexible copper conductors support suspended vertical riser drops in deep wells, sea cages and submersible pump shafts.

Fixed installation

Suitable

Installs cleanly along floating fish-farm walkways, mooring collars, hatchery basins and subsea pumping stations.

Offshore platform & shipboard deck trays

Suitable

Withstands salt mist, ozone, UV exposure, fish oil and mechanical wave flexing in coastal and offshore aquaculture farms.

Motorised monospiral reel

Not suitable

Submersible pump and aquaculture rubber cables are not intended for high-speed horizontal crane reeling drums.

Use RT-PUR-HF Reeling Cable

Typical machinesUnderwater & Ocean ExplorationOffshore & Coastal Aquaculture Cage Power DistributionSubmersible Aerators, Blowers & Clean-Water Well PumpsWRAS / KTW Hatchery & Potable Water Pumping SystemsSubmersible Pool, Reservoir & Tank Cleaning Robots

Construction

Layer by layer

Shown: P7370-SP 1000V Flat XLPE (IEC 60502-1 & AS/NZS 5000.1 Heavy-Duty XLPE Flat Submersible Pump Specification) featuring flexible stranded copper conductors (3 cores), cross-linked polyethylene (xlpe) core insulation and subsea / marine outer protective sheath (4-layer construction).

P7370-SP 1000V Flat XLPE — stepped horizontal cutaway showing Flexible Stranded Copper Conductors (3 Cores) and Subsea — Layer cutaway

#	Layer	Material & reference
1	Flexible Stranded Copper Conductors (3 C	IEC 60228 Class 5 finely stranded annealed copper phase conductors
2	Cross-Linked Polyethylene (XLPE) Core In	High-dielectric water-resistant thermoset XLPE insulation laid parallel
3	Water-Blocking Elastomeric Bedding Profi	Extruded flat moisture-barrier bedding locking parallel cores in place
4	Subsea / Marine Outer Protective Sheath	Heavy-duty abrasion- and hydrostatic-pressure-resistant flat outer jacket

P7370-SP 1000V Flat XLPE — Standard Subsea & Marine Execution

Built to IEC 60502-1 & AS/NZS 5000.1 Heavy-Duty XLPE Flat Submersible Pump Specification with flexible stranded copper conductors (3 cores) and subsea / marine outer protective sheath

P7370-SP 1000V Flat XLPE — Custom Winch Length / Molded Termination

Available on continuous export winch drums or factory-terminated with subsea wet-mate / mechanical sockets

P7370-SP 1000V Flat XLPE — Hydrostatic & Routine Certified

Supplied with EN 10204 3.1 routine dielectric, conductor/optical continuity & hydrostatic qualification report

Technical data

Ratings & operating limits

Typical values: Typical values for this cable type, based on IEC 60502-1 & AS/NZS 5000.1 Heavy-Duty XLPE Flat Submersible Pump Specification. Values for your order are confirmed in the datasheet and quotation.

Electrical

Rated voltage / operating system: 1,000 V (IEC 60502-1 & AS/NZS 5000.1 Heavy-Duty XLPE Flat Submersible Pump Specification)
Core / conductor construction: Flexible Stranded Copper Conductors (3 Cores) — IEC 60228 Class 5 finely stranded annealed copper phase conductors
Primary dielectric / optical buffer: Cross-Linked Polyethylene (XLPE) Core Insulation — High-dielectric water-resistant thermoset XLPE insulation laid parallel

Thermal

Continuous operating temperature: −40…+90 °C (submerged seawater & topside deck service)
Hydrostatic & thermal cycling endurance: Verified cold-bend and wet dielectric stability across −40…+90 °C per IEC 60502-1 & AS/NZS 5000.1 Heavy-Duty XLPE Flat Submersible Pump Specification
Storage & transport temperature: −40…+80 °C on export wooden/steel cable drum

Mechanical

Outer jacket / sheath protection: Subsea / Marine Outer Protective Sheath — Heavy-duty abrasion- and hydrostatic-pressure-resistant flat outer jacket
Minimum bending radius: 6 × OD
Reinforcement / screen / bedding layer: Water-Blocking Elastomeric Bedding Profile — Extruded flat moisture-barrier bedding locking parallel cores in place

Resistance

Seawater, hydrolysis & oil resistance: Resistant to permanent seawater immersion, hydrolysis, hydraulic oil and bio-fouling per IEC 60502-1 & AS/NZS 5000.1 Heavy-Duty XLPE Flat Submersible Pump Specification
Hydrostatic pressure & water blocking: Radial and longitudinal water-blocking integrity verified per IEC 60502-1 & AS/NZS 5000.1 Heavy-Duty XLPE Flat Submersible Pump Specification
RoHS & REACH compliance: RoHS 2 (2011/65/EU + 2015/863) & REACH SVHC compliant

Reference standards

Governing standard: IEC 60502-1 & AS/NZS 5000.1 Heavy-Duty XLPE Flat Submersible Pump Specification
Subsea & conductor qualification standards: IEC 60228 / DNV-ST-E402 / ISO 13628-5 / IEC 60794 / EN 10204
Quality management & inspection: ISO 9001:2015 & EN 10204 3.1 factory routine inspection

Identification

Model designation: P7370-SP 1000V Flat XLPE
Sheath colour & metre marking: Continuous metre-marked black outer finish (Subsea / Marine )
Customs tariff (HS): 8544.49 / 8544.60 / 8544.70

Sizes

3 standard P7370-SP 1000V Flat XLPE configurations

Manufactured to IEC 60502-1 & AS/NZS 5000.1 Heavy-Duty XLPE Flat Submersible Pump Specification for subsea robotics, ROV umbilicals, marine aquaculture and offshore sensor applications.

Dimensions, tensile load & weights
Order designation	Configuration	Core / stranding	Outer Ø ≈ mm	Net weight ≈ kg/km	Max. pulling kN ≈	Min. bend R mm
P7370-SP 1000V Flat XLPE Construction Schedule (−40…+90 °C)
P7370-SP 1000V Flat XLPE 4G4.0 mm²	4G4.0 mm² (3×4.0 + 1G4.0 / 12 AWG)	IEC 60228 Class 5 Cu/SnCu	14.2	340	3.2	85
P7370-SP 1000V Flat XLPE 4G16 mm²	4G16 mm² (3×16 + 1G16 / 6 AWG)	IEC 60228 Class 5 Cu/SnCu	21.4	840	9.6	130
P7370-SP 1000V Flat XLPE 3×50+1G25 mm²	3 × 50 + 1G25 mm² (or 3×70+1G35)	IEC 60228 Class 5 Cu/SnCu	32.8	2,240	26.5	195

Typical values for this cable type; dimensions and weights for your order are confirmed in the quotation.
Custom core counts, optical fiber channels, wet-mate terminations and continuous winch lengths available per IEC 60502-1 & AS/NZS 5000.1 Heavy-Duty XLPE Flat Submersible Pump Specification.

Electrical, optical & thermal parameters
Configuration	Max. DC R₂₀ Ω/km	Rating / Impedance / Load	Operating temp.
4G4.0 mm² (3×4.0 + 1G4.0 / 12 AWG)	4.95	1,000 V (36 A Submersible)	−40…+90 °C
4G16 mm² (3×16 + 1G16 / 6 AWG)	1.21	1,000 V (98 A Submersible)	−40…+90 °C
3 × 50 + 1G25 mm² (or 3×70+1G35)	0.39	1,000 V (195 A Feeder)	−40…+90 °C

Every production length undergoes routine conductor DC resistance / OTDR optical attenuation, AC dielectric and dimensional verification.

Quality & approvals

Testing & inspection

Routine tests on every production length, sample and type tests per batch — documented on an EN 10204 3.1 inspection certificate.

ConductorClass 5 stranding
Spark test100 % in-line
Lay-upCores, earth, fillers
SheathingInner, braid / screen, outer
Electrical testsAC voltage, resistance
DimensionsOD, wall thickness
Inspection documents & dispatchDrum & dispatch

Testing & inspection	Test value / reference	Frequency
Routine tests
Conductor DC resistance / OTDR optical & dimensional check (IEC 60502-1 & AS/NZS 5000.1 Heavy-Duty XLPE Flat Submersible Pump Specification)	DC resistance at 20 °C, optical attenuation and wall thickness within IEC 60502-1 & AS/NZS 5000.1 Heavy-Duty XLPE Flat Submersible Pump Specification limits	Every manufactured drum length
AC high-voltage dielectric & insulation resistance test (IEC 60502-1 & AS/NZS 5000.1 Heavy-Duty XLPE Flat Submersible Pump Specification)	Zero dielectric breakdown and verified wet insulation resistance for 1,000 V rating	Every manufactured drum length
Sample tests
Hydrostatic pressure, tensile load & seawater immersion qualification (IEC 60502-1 & AS/NZS 5000.1 Heavy-Duty XLPE Flat Submersible Pump Specification)	Verified hydrostatic pressure integrity, breaking load and flex endurance across −40…+90 °C	Type qualification & periodic lot audit

Inspection certificate

Issued with every drum, listing the routine test results for that length.

Product approvals

IEC 60502-1 / AS/NZS 5000 CompliantEN 10204 3.1 Factory Test CertificateCE, RoHS 2 (2011/65/EU) & REACH

Company certificates

ISO 9001ISO 14001ISO 45001VDE marks approvalUL / cULCE · LVD / EMC

Marking & supply

Ordering & delivery

Sheath marking

TEBAOFLEX P7370-SP 1000V Flat XLPE IEC 60502-1 / AS/NZS 5000 1,000 V CE

Delivery form: Heavy-duty export fumigated wooden drums, steel winch reels or pre-terminated subsea assemblies
Standard lengths: 500 m, 1,000 m, 3,000 m continuous winch lengths or custom cut-to-length subsea jumpers
MOQ: 100 m (standard configurations) · 300 m (custom subsea builds)
Lead time: 2–4 weeks ex-works
Incoterms: EXW, FCA, FOB, CIF, DAP

Technical documents

Downloads

PDFP7370-SP 1000V Heavy Duty XLPE Flat Submersible Cable – technical datasheet3 sizes · construction, technical data, approvals XLSXP7370-SP 1000V Flat XLPE spec data (Excel)All 3 sizes with dimensions and data, for your BOM or quotation

Revision: 2026-10-29
Updated: 2026-10-29

FAQ

Questions engineers ask first

Not covered here? Send your drawing — an engineer replies within 2 business hours.

What governing standard and construction define P7370-SP 1000V Flat XLPE (P7370-SP 1000V Heavy Duty XLPE Flat Submersible Cable)?

P7370-SP 1000V Flat XLPE (P7370-SP 1000V Heavy Duty XLPE Flat Submersible Cable) is manufactured in accordance with IEC 60502-1 & AS/NZS 5000.1 Heavy-Duty XLPE Flat Submersible Pump Specification for 1,000 V subsea,ROV and marine aquaculture service over -40 to +90 °C. Its 4-layer construction comprises flexible stranded copper conductors (3 cores), cross-linked polyethylene (xlpe) core insulation and subsea / marine outer protective sheath.

What is the minimum bending radius and operating temperature range for P7370-SP 1000V Flat XLPE?

The minimum bending radius for P7370-SP 1000V Flat XLPE is 6 × OD across its continuous operating temperature range of -40 to +90 °C, ensuring mechanical flex endurance and hydrostatic reliability in subsea winches, TMS cages and aquaculture installations.

How are the concentric layers of P7370-SP 1000V Flat XLPE arranged from inside to outside?

From inside to outside, the construction sequence is: (01) Flexible Stranded Copper Conductors (3 Cores) — IEC 60228 Class 5 finely stranded annealed copper phase conductors; (02) Cross-Linked Polyethylene (XLPE) Core Insulation — High-dielectric water-resistant thermoset XLPE insulation laid parallel; (03) Water-Blocking Elastomeric Bedding Profile — Extruded flat moisture-barrier bedding locking parallel cores in place; (04) Subsea / Marine Outer Protective Sheath — Heavy-duty abrasion- and hydrostatic-pressure-resistant flat outer jacket.

What factory test certificates are supplied with P7370-SP 1000V Flat XLPE?

Every production drum of P7370-SP 1000V Flat XLPE undergoes routine conductor DC resistance / optical OTDR continuity, AC high-voltage dielectric and dimensional testing per IEC 60502-1 & AS/NZS 5000.1 Heavy-Duty XLPE Flat Submersible Pump Specification, and is delivered with an EN 10204 3.1 factory test certificate.

Request a quote

Get an engineering quote for P7370-SP 1000V Flat XLPE

Your selection and application details are copied into the enquiry form below.

01Selected sizes

Use + Add next to a size or configuration.

02Reel & motion

Add your operating conditions here to include them in your enquiry.

Reel typeDrum core diameter (mm)Cable length on drum (m)Travel speed (m/min)Max. accelerationCycles per hourLength and quantityAmbient temperatureExposure (outdoor, water, oil, abrasion)Destination countryEquipment and operating conditions

03Message for our engineers

P7370-SP 1000V Flat XLPE P7370-SP 1000V Heavy Duty XLPE Flat Submersible Cable

Selected sizes:


Reel & motion:
- Reel type: 
- Drum core diameter (mm): 
- Cable length on drum (m): 
- Travel speed (m/min): 
- Max. acceleration: 
- Cycles per hour: 
- Length and quantity: 
- Ambient temperature: 
- Exposure (outdoor, water, oil, abrasion): 
- Destination country: 
- Equipment and operating conditions:

Send via WhatsApp