1 / 5

Product

10,000 psi pressure-stabilized Gigabit Ethernet ROV cableTIA-568 Cat.5e/6 @ 10kPSI600–1,000 V + Gigabit2,400 lbs Aramid Braid

FM022208 10,000 PSI Deepwater Gigabit Ethernet & Power ROV CableTIA-568-B @ 10,000 PSI · 0.6/1 kV · 10,000 psi pressure-stabilized gigabit ethernet

Q: What governing standard and construction define FM022208 (FM022208 10,000 PSI Deepwater Gigabit Ethernet & Power ROV Cable)?

FM022208 (FM022208 10,000 PSI Deepwater Gigabit Ethernet & Power ROV Cable) is manufactured in accordance with ANSI/TIA-568-B Cat.5e/Cat.6 @ 10,000 PSI Deepwater for 0.6/1 kV service over -40 °C to +80 °C. Its 5-layer construction comprises 10,000 psi gigabit ethernet core, dual alum/braid emc shield and high-temp subsea pur jacket.

Q: What is the minimum bending radius and operating temperature range for FM022208?

The minimum bending radius for FM022208 is 10 × OD across its continuous operating temperature range of -40 °C to +80 °C, ensuring mechanical and dielectric reliability in subsea, marine and submersible service.

Q: How are the concentric layers of FM022208 arranged from inside to outside?

From inside to outside, the construction sequence is: (01) 10,000 PSI Gigabit Ethernet Core — 4 pairs × 23/24 AWG pressure-stabilized data pairs (<2% deviation at 10,000 psi); (02) Dual Alum/Braid EMC Shield — 100% Aluminum/Polyester foil tape + high-coverage tinned copper braid shield; (03) Power & Control Cores (4×18 AWG / 5×12 AWG) — Stranded tinned copper power/control conductors cabled around data core; (04) Water-Block & Aramid Braid (K8–K24) — Elastomeric void water-blocking + Aramid strength braid (up to 2,400 lbs); (05) High-Temp Subsea PUR Jacket — Low-friction polyurethane jacket compatible with 120 °C hot-rubber molding.

Q: What factory test certificates are supplied with FM022208?

Every production drum of FM022208 undergoes routine conductor resistance/continuity, high-voltage dielectric and dimensional testing per ANSI/TIA-568-B Cat.5e/Cat.6 @ 10,000 PSI Deepwater, and is delivered with an EN 10204 3.1 factory test certificate.

Subsea Ethernet (FM022208-01 to -14) & Subsea Cat 5e (FMXCAT51205K24 to FMXCAT52824K8) 10,000 PSI Deepwater Gigabit Ethernet & Power Hybrid ROV Umbilical Cable (TIA-568-B @ 10,000 PSI, 0.6/1 kV, -40 °C to +80 °C).

Water-resistant

EMC screen

Low-EMC design

Oil-resistant

Configuration

Order designation: FM022208 Config A (Compact)
Outer Ø ≈: 10.4 mm
Net weight ≈: 155 kg/km
Tensile rating ≈: 4.5 kN
Core / stranding: Stranded tinned Cu (IEC 60228 / ASTM)

All sizes (3)

Request a quote Datasheet WhatsApp info@tebaoflex.com

Engineering reply in 2 business hoursCut-to-length export drumsEN 10204 3.1 certificate per drum

Rated voltage: 0.6/1 kV
Operating temp.: −40…+80 °C
Min. bend radius: 10 × OD
Core / conductor: 4×2 Cat.5e/6
Outer protection: Aramid
Standard: TIA-568-B @

Typical values for this cable type, based on ANSI/TIA-568-B Cat.5e/Cat.6 @ 10,000 PSI Deepwater — confirmed in the datasheet and quotation for your order.

Application fit

Is FM022208 right for your machine?

Immersion & wet locations

Suitable

Water-blocked core matrix and hydrolysis-resistant subsea jacketing withstand continuous deepwater hydrostatic pressure.

Vertical / spreader reel

Suitable

Torque-balanced aramid or contra-helical steel armour supports vertical winch deployment without hockling.

Offshore platform & shipboard deck trays

Suitable

Marine-grade outer sheath and armour package resist LARS sheave abrasion, UV exposure and salt-spray corrosion.

Trailing & towing

Suitable

High tensile breaking strength supports underwater towing, ROV excursion and seabed plough/trencher duty.

Energy chain / drag chain

Not suitable

Subsea umbilical and tow construction is not intended for high-cycle indoor factory drag chains.

Use Drag-Chain Servo Cable

Typical machinesMarine & Offshore CableWork-Class & Observation ROV SystemsOffshore Wind & Subsea Power GridsOceanographic, Sonar & Seismic SurveyCommercial Diving & Subsea Intervention

Construction

Layer by layer

Shown: FM022208 (ANSI/TIA-568-B Cat.5e/Cat.6 @ 10,000 PSI Deepwater) featuring 10,000 psi gigabit ethernet core, dual alum/braid emc shield and high-temp subsea pur jacket (5-layer construction).

Schematic, not to scale — generated from the layer data

#	Layer	Material & reference
1	10,000 PSI Gigabit Ethernet Core	4 pairs × 23/24 AWG pressure-stabilized data pairs (<2% deviation at 10,000 psi)
2	Dual Alum/Braid EMC Shield	100% Aluminum/Polyester foil tape + high-coverage tinned copper braid shield
3	Power & Control Cores (4×18 AWG / 5×12 AWG)	Stranded tinned copper power/control conductors cabled around data core
4	Water-Block & Aramid Braid (K8–K24)	Elastomeric void water-blocking + Aramid strength braid (up to 2,400 lbs)
5	High-Temp Subsea PUR Jacket	Low-friction polyurethane jacket compatible with 120 °C hot-rubber molding

FM022208 — Standard Subsea & Marine Execution

Built to ANSI/TIA-568-B Cat.5e/Cat.6 @ 10,000 PSI Deepwater with 10,000 psi gigabit ethernet core and high-temp subsea pur jacket

FM022208 — Custom Drum Length & Termination Kit

Available in custom continuous subsea/wellbore drum lengths or pre-terminated assemblies

FM022208 — Routine & Hydrostatic Test Certified

Supplied with EN 10204 3.1 routine dielectric, resistance & pressure/dimensional report

Technical data

Ratings & operating limits

Typical values: Typical values for this cable type, based on ANSI/TIA-568-B Cat.5e/Cat.6 @ 10,000 PSI Deepwater. Values for your order are confirmed in the datasheet and quotation.

Electrical

Rated voltage / transmission duty: 0.6/1 kV (ANSI/TIA-568-B Cat.5e/Cat.6 @ 10,000 PSI Deepwater)
Core / conductor construction: 10,000 PSI Gigabit Ethernet Core — 4 pairs × 23/24 AWG pressure-stabilized data pairs (<2% deviation at 10,000 psi)
Primary dielectric / buffering: Dual Alum/Braid EMC Shield — 100% Aluminum/Polyester foil tape + high-coverage tinned copper braid shield

Thermal

Continuous operating temperature: −40…+80 °C (subsea, marine & submersible duty)
Short-circuit / peak thermal rating: Verified thermal stability per ANSI/TIA-568-B Cat.5e/Cat.6 @ 10,000 PSI Deepwater
Storage & transport temperature: −40…+80 °C on export wooden/steel drum

Mechanical

Outer protection / armouring: High-Temp Subsea PUR Jacket — Low-friction polyurethane jacket compatible with 120 °C hot-rubber molding
Minimum bending radius: 10 × OD
Hydrostatic, tensile & crush duty: Water-Block & Aramid Braid (K8–K24) — Elastomeric void water-blocking + Aramid strength braid (up to 2,400 lbs)

Resistance

Hydrostatic pressure & water blocking: Engineered for continuous submersion and hydrostatic integrity per ANSI/TIA-568-B Cat.5e/Cat.6 @ 10,000 PSI Deepwater
Seawater, oil & chemical resistance: Resistant to seawater hydrolysis, hydraulic oils and abrasion per ANSI/TIA-568-B Cat.5e/Cat.6 @ 10,000 PSI Deepwater
RoHS & REACH compliance: RoHS 2 (2011/65/EU + 2015/863) & REACH SVHC compliant

Reference standards

Governing standard: ANSI/TIA-568-B Cat.5e/Cat.6 @ 10,000 PSI Deepwater
Environmental & test standards: IEC 60228 / IEC 60332 / ISO 13628-5 / EN 10204
Quality management & inspection: ISO 9001:2015 & EN 10204 3.1 factory routine inspection

Identification

Model designation: FM022208
Sheath colour & metre marking: Continuous metre-marked black outer finish (Aramid + High-Temp PUR)
Customs tariff (HS): 8544.49 / 8544.60 / 8544.70

Sizes

3 standard FM022208 subsea & marine configurations

Manufactured to ANSI/TIA-568-B Cat.5e/Cat.6 @ 10,000 PSI Deepwater for subsea, offshore, deep-well and marine applications.

Dimensions, tensile load & weights
Order designation	Configuration	Core / stranding	Outer Ø ≈ mm	Net weight ≈ kg/km	Tensile rating kN ≈	Min. bend R mm
FM022208 Construction Schedule (−40…+80 °C)
FM022208 Config A (Compact)	4×2×24 AWG + 2×18 AWG (or 4C)	Stranded tinned Cu (IEC 60228 / ASTM)	10.4	155	4.5	85
FM022208 Config B (Standard)	4×2×20 AWG + 4×16 AWG (or 8C)	Stranded tinned Cu (IEC 60228 / ASTM)	13.3	265	9.6	110
FM022208 Config C (Heavy Hybrid)	8×2×20 AWG + 4×12 AWG (or 12C)	Stranded tinned Cu (IEC 60228 / ASTM)	16.6	420	18.5	140

Typical values for this cable type; dimensions and weights for your order are confirmed in the quotation.
Custom core cross-sections, pair/fibre counts, armour grades and factory drum lengths available per ANSI/TIA-568-B Cat.5e/Cat.6 @ 10,000 PSI Deepwater.

Electrical, optical & thermal parameters
Configuration	Max. DC R₂₀ / Atten. Ω/km or dB/km	Rating / Impedance	Operating temp.
4×2×24 AWG + 2×18 AWG (or 4C)	28.40	0.6/1 kV (45–100 Ω data)	−40…+80 °C
4×2×20 AWG + 4×16 AWG (or 8C)	10.70	0.6/1 kV (45–100 Ω data)	−40…+80 °C
8×2×20 AWG + 4×12 AWG (or 12C)	5.40	0.6/1 kV (High-Power Hybrid)	−40…+80 °C

Every production length undergoes routine conductor DC resistance, high-voltage dielectric or OTDR continuity and dimensional verification.

Quality & approvals

Testing & inspection

Routine tests on every production length, sample and type tests per batch — documented on an EN 10204 3.1 inspection certificate.

ConductorClass 5 stranding
Spark test100 % in-line
Lay-upCores, earth, fillers
SheathingInner, braid / screen, outer
Electrical testsAC voltage, resistance
DimensionsOD, wall thickness
Inspection documents & dispatchDrum & dispatch

Testing & inspection	Test value / reference	Frequency
Routine tests
Conductor resistance, continuity & dimensional verification (ANSI/TIA-568-B Cat.5e/Cat.6 @ 10,000 PSI Deepwater)	DC resistance at 20 °C / optical attenuation and outer diameter within ANSI/TIA-568-B Cat.5e/Cat.6 @ 10,000 PSI Deepwater tolerances	Every manufactured drum length
High-voltage dielectric & insulation resistance test (ANSI/TIA-568-B Cat.5e/Cat.6 @ 10,000 PSI Deepwater)	Zero dielectric breakdown and verified insulation resistance for 0.6/1 kV rating	Every manufactured drum length
Sample tests
Hydrostatic pressure, water-blocking & mechanical endurance qualification (ANSI/TIA-568-B Cat.5e/Cat.6 @ 10,000 PSI Deepwater)	Verified submersion integrity, tensile load and thermal stability across −40…+80 °C	Type qualification & periodic lot audit

Inspection certificate

Issued with every drum, listing the routine test results for that length.

Product approvals

TIA-568-B @ 10,000 PSI CompliantEN 10204 3.1 Factory Test CertificateCE, RoHS 2 (2011/65/EU) & REACH

Company certificates

ISO 9001ISO 14001ISO 45001VDE marks approvalUL / cULCE · LVD / EMC

Marking & supply

Ordering & delivery

Sheath marking

TEBAOFLEX FM022208 TIA-568-B @ 10,000 PSI 0.6/1 kV CE

Delivery form: Heavy-duty export fumigated wooden drums or steel subsea reels
Standard lengths: 500 m, 1,000 m or custom continuous subsea/wellbore lengths
MOQ: 100 m (standard configurations) · 500 m (custom builds)
Lead time: 2–5 weeks ex-works
Incoterms: EXW, FCA, FOB, CIF, DAP

Technical documents

Downloads

PDFFM022208 10,000 PSI Deepwater Gigabit Ethernet & Power ROV Cable – technical datasheet3 sizes · construction, technical data, approvals XLSXFM022208 spec data (Excel)All 3 sizes with dimensions and data, for your BOM or quotation

Revision: 2026-10-25
Updated: 2026-10-25

FAQ

Questions engineers ask first

Not covered here? Send your drawing — an engineer replies within 2 business hours.

What governing standard and construction define FM022208 (FM022208 10,000 PSI Deepwater Gigabit Ethernet & Power ROV Cable)?

FM022208 (FM022208 10,000 PSI Deepwater Gigabit Ethernet & Power ROV Cable) is manufactured in accordance with ANSI/TIA-568-B Cat.5e/Cat.6 @ 10,000 PSI Deepwater for 0.6/1 kV service over -40 °C to +80 °C. Its 5-layer construction comprises 10,000 psi gigabit ethernet core, dual alum/braid emc shield and high-temp subsea pur jacket.

What is the minimum bending radius and operating temperature range for FM022208?

The minimum bending radius for FM022208 is 10 × OD across its continuous operating temperature range of -40 °C to +80 °C, ensuring mechanical and dielectric reliability in subsea, marine and submersible service.

How are the concentric layers of FM022208 arranged from inside to outside?

From inside to outside, the construction sequence is: (01) 10,000 PSI Gigabit Ethernet Core — 4 pairs × 23/24 AWG pressure-stabilized data pairs (<2% deviation at 10,000 psi); (02) Dual Alum/Braid EMC Shield — 100% Aluminum/Polyester foil tape + high-coverage tinned copper braid shield; (03) Power & Control Cores (4×18 AWG / 5×12 AWG) — Stranded tinned copper power/control conductors cabled around data core; (04) Water-Block & Aramid Braid (K8–K24) — Elastomeric void water-blocking + Aramid strength braid (up to 2,400 lbs); (05) High-Temp Subsea PUR Jacket — Low-friction polyurethane jacket compatible with 120 °C hot-rubber molding.

What factory test certificates are supplied with FM022208?

Every production drum of FM022208 undergoes routine conductor resistance/continuity, high-voltage dielectric and dimensional testing per ANSI/TIA-568-B Cat.5e/Cat.6 @ 10,000 PSI Deepwater, and is delivered with an EN 10204 3.1 factory test certificate.

Request a quote

Get an engineering quote for FM022208

Your selection and application details are copied into the enquiry form below.

01Selected sizes

Use + Add next to a size or configuration.

02Reel & motion

Add your operating conditions here to include them in your enquiry.

Reel typeDrum core diameter (mm)Cable length on drum (m)Travel speed (m/min)Max. accelerationCycles per hourLength and quantityAmbient temperatureExposure (outdoor, water, oil, abrasion)Destination countryEquipment and operating conditions

03Message for our engineers

FM022208 10,000 PSI Deepwater Gigabit Ethernet & Power ROV Cable

Selected sizes:


Reel & motion:
- Reel type: 
- Drum core diameter (mm): 
- Cable length on drum (m): 
- Travel speed (m/min): 
- Max. acceleration: 
- Cycles per hour: 
- Length and quantity: 
- Ambient temperature: 
- Exposure (outdoor, water, oil, abrasion): 
- Destination country: 
- Equipment and operating conditions:

Send via WhatsApp