1 / 5

Product

800 m deep-well potable water submersible pump cable WRAS / ACS / KTW / DM174450/750 V & 0.6/1 kVAD8 800 m Submersion

800 / 07 / 1 0.6/1 kV 800m Deep-Well Potable Water Pump CableWRAS / KTW / ACS · 0.6/1 kV · 800 m deep-well potable water submersible pump cable

800 & 07 / 1 (Round & FL Flat Series) 450/750V & 0.6/1kV Deep-Well Potable Water Submersible Pump Cable (Up to 800m Depth) (WRAS / KTW / ACS, 0.6/1 kV, -25 °C to +80 °C, min. bend radius 6 × OD).

Water-resistant

Approved

Ozone, UV & moisture

Outdoor & humid

Configuration

Order designation: 800 4G16 mm²
Outer Ø ≈: 21.8 mm
Net weight ≈: 840 kg/km
Tensile rating ≈: 2.4 kN
Core / stranding: IEC 60228 Class 5 flexible Cu/SnCu

All sizes (3)

Request a quote Datasheet WhatsApp info@tebaoflex.com

Engineering reply in 2 business hoursCut-to-length export drumsEN 10204 3.1 certificate per drum

Rated voltage: 0.6/1 kV
Operating temp.: −25…+80 °C
Min. bend radius: 6 × OD
Core / conductor: 3G–4G 1.5–185
Outer protection: Blue Food-Grade
Standard: WRAS / KTW / ACS

Typical values for this cable type, based on DIN VDE 0282 / UK WRAS / ACS / KTW-W270 / DM 174 — confirmed in the datasheet and quotation for your order.

Application fit

Is 800 / 07 / 1 right for your machine?

800 & 07 / 1 (Round & FL Flat Series) 450/750V & 0.6/1kV Deep-Well Potable Water Submersible Pump Cable (Up to 800m Depth) (WRAS / KTW / ACS, 0.6/1 kV, -25 °C to +80 °C, min. bend radius 6 × OD).

Immersion & wet locations

Suitable

Cross-linked submersible elastomer compound is qualified for continuous deep-well, potable-water or sewage immersion.

Free-hanging vertical run

Suitable

High-modulus conductor and elastomer construction supports vertical suspension in deep boreholes and pump risers.

Trailing & towing

Suitable

Tear- and abrasion-resistant rubber outer sheath handles mobile dewatering, dredger and portable pump deployment.

Fixed installation

Suitable

Suitable for permanent wet-well, treatment tank, geothermal borehole and submergedmanifold installations.

Energy chain / drag chain

Not suitable

Submersible rubber pump cable is not intended for high-acceleration automation drag chains.

Use Drag-Chain Control Cable

Typical machinesDeep-Well Potable Water PumpingMunicipal Sewage & Wastewater PlantsMine Dewatering & Slurry DredgingGeothermal, Spa & Pool Installations

Construction

Layer by layer

Shown: 800 / 07 / 1 (DIN VDE 0282 / UK WRAS / ACS / KTW-W270 / DM 174) featuring class 5 tinned copper conductors (4g16), high-modulus waterproof epr (ei7 / 3gi3) and quad-certified blue food-grade sheath (4-layer construction).

Schematic, not to scale — generated from the layer data

#	Layer	Material & reference
1	Class 5 Tinned Copper Conductors (4G16)	IEC 60228 / VDE 0295 Class 5 flexible annealed tinned copper conductors
2	High-Modulus Waterproof EPR (EI7 / 3GI3)	0.6/1 kV water-resistant EPR insulation color-coded Brown, Black, Grey & G/Y
3	Inner Waterproof Sheath Layer (800 m)	Extruded waterproof elastomeric inner bedding resisting 80 bar hydrostatic pressure
4	Quad-Certified Blue Food-Grade Sheath	Cross-linked 5GM3/EM2 elastomer certified to UK WRAS, ACS, KTW/W270 & DM 174/04

800 / 07 / 1 — Standard Subsea & Marine Execution

Built to DIN VDE 0282 / UK WRAS / ACS / KTW-W270 / DM 174 with class 5 tinned copper conductors (4g16) and quad-certified blue food-grade sheath

800 / 07 / 1 — Custom Drum Length & Termination Kit

Available in custom continuous subsea/wellbore drum lengths or pre-terminated assemblies

800 / 07 / 1 — Routine & Hydrostatic Test Certified

Supplied with EN 10204 3.1 routine dielectric, resistance & pressure/dimensional report

Technical data

Ratings & operating limits

Typical values: Typical values for this cable type, based on DIN VDE 0282 / UK WRAS / ACS / KTW-W270 / DM 174. Values for your order are confirmed in the datasheet and quotation.

Electrical

Rated voltage / transmission duty: 0.6/1 kV (DIN VDE 0282 / UK WRAS / ACS / KTW-W270 / DM 174)
Core / conductor construction: Class 5 Tinned Copper Conductors (4G16) — IEC 60228 / VDE 0295 Class 5 flexible annealed tinned copper conductors
Primary dielectric / buffering: High-Modulus Waterproof EPR (EI7 / 3GI3) — 0.6/1 kV water-resistant EPR insulation color-coded Brown, Black, Grey & G/Y

Thermal

Continuous operating temperature: −25…+80 °C (subsea, marine & submersible duty)
Short-circuit / peak thermal rating: Verified thermal stability per DIN VDE 0282 / UK WRAS / ACS / KTW-W270 / DM 174
Storage & transport temperature: −40…+80 °C on export wooden/steel drum

Mechanical

Outer protection / armouring: Quad-Certified Blue Food-Grade Sheath — Cross-linked 5GM3/EM2 elastomer certified to UK WRAS, ACS, KTW/W270 & DM 174/04
Minimum bending radius: 6 × OD
Hydrostatic, tensile & crush duty: Inner Waterproof Sheath Layer (800 m) — Extruded waterproof elastomeric inner bedding resisting 80 bar hydrostatic pressure

Resistance

Hydrostatic pressure & water blocking: Engineered for continuous submersion and hydrostatic integrity per DIN VDE 0282 / UK WRAS / ACS / KTW-W270 / DM 174
Seawater, oil & chemical resistance: Resistant to seawater hydrolysis, hydraulic oils and abrasion per DIN VDE 0282 / UK WRAS / ACS / KTW-W270 / DM 174
RoHS & REACH compliance: RoHS 2 (2011/65/EU + 2015/863) & REACH SVHC compliant

Reference standards

Governing standard: DIN VDE 0282 / UK WRAS / ACS / KTW-W270 / DM 174
Environmental & test standards: IEC 60228 / IEC 60332 / ISO 13628-5 / EN 10204
Quality management & inspection: ISO 9001:2015 & EN 10204 3.1 factory routine inspection

Identification

Model designation: 800 / 07 / 1
Sheath colour & metre marking: Continuous metre-marked blue outer finish (Blue Food-Grade 5GM3)
Customs tariff (HS): 8544.49 / 8544.60 / 8544.70

Sizes

3 standard 800 / 07 / 1 subsea & marine configurations

Manufactured to DIN VDE 0282 / UK WRAS / ACS / KTW-W270 / DM 174 for subsea, offshore, deep-well and marine applications.

Dimensions, tensile load & weights
Order designation	Configuration	Core / stranding	Outer Ø ≈ mm	Net weight ≈ kg/km	Tensile rating kN ≈	Min. bend R mm
800 / 07 / 1 Construction Schedule (−25…+80 °C)
800 4G16 mm²	4G16 mm² (3×16 + 1G16)	IEC 60228 Class 5 flexible Cu/SnCu	21.8	840	2.4	130
800 4G35 mm²	4G35 mm² (3×35 + 1G16)	IEC 60228 Class 5 flexible Cu/SnCu	28.6	1,620	5.2	172
800 3×70 + 3G16 mm²	3 × 70 mm² + 3G16 mm²	IEC 60228 Class 5 flexible Cu/SnCu	38.4	3,180	10.5	230

Typical values for this cable type; dimensions and weights for your order are confirmed in the quotation.
Custom core cross-sections, pair/fibre counts, armour grades and factory drum lengths available per DIN VDE 0282 / UK WRAS / ACS / KTW-W270 / DM 174.

Electrical, optical & thermal parameters
Configuration	Max. DC R₂₀ / Atten. Ω/km or dB/km	Rating / Impedance	Operating temp.
4G16 mm² (3×16 + 1G16)	1.21	0.6/1 kV (94 A submerged)	−25…+80 °C
4G35 mm² (3×35 + 1G16)	0.55	0.6/1 kV (152 A submerged)	−25…+80 °C
3 × 70 mm² + 3G16 mm²	0.27	0.6/1 kV (235 A submerged)	−25…+80 °C

Every production length undergoes routine conductor DC resistance, high-voltage dielectric or OTDR continuity and dimensional verification.

Quality & approvals

Testing & inspection

Routine tests on every production length, sample and type tests per batch — documented on an EN 10204 3.1 inspection certificate.

ConductorClass 5 stranding
Spark test100 % in-line
Lay-upCores, earth, fillers
SheathingInner, braid / screen, outer
Electrical testsAC voltage, resistance
DimensionsOD, wall thickness
Inspection documents & dispatchDrum & dispatch

Testing & inspection	Test value / reference	Frequency
Routine tests
Conductor resistance, continuity & dimensional verification (DIN VDE 0282 / UK WRAS / ACS / KTW-W270 / DM 174)	DC resistance at 20 °C / optical attenuation and outer diameter within DIN VDE 0282 / UK WRAS / ACS / KTW-W270 / DM 174 tolerances	Every manufactured drum length
High-voltage dielectric & insulation resistance test (DIN VDE 0282 / UK WRAS / ACS / KTW-W270 / DM 174)	Zero dielectric breakdown and verified insulation resistance for 0.6/1 kV rating	Every manufactured drum length
Sample tests
Hydrostatic pressure, water-blocking & mechanical endurance qualification (DIN VDE 0282 / UK WRAS / ACS / KTW-W270 / DM 174)	Verified submersion integrity, tensile load and thermal stability across −25…+80 °C	Type qualification & periodic lot audit

Inspection certificate

Issued with every drum, listing the routine test results for that length.

Product approvals

WRAS / KTW / ACS CompliantEN 10204 3.1 Factory Test CertificateCE, RoHS 2 (2011/65/EU) & REACH

Company certificates

ISO 9001ISO 14001ISO 45001VDE marks approvalUL / cULCE · LVD / EMC

Marking & supply

Ordering & delivery

Sheath marking

TEBAOFLEX 800 / 07 / 1 WRAS / KTW / ACS 0.6/1 kV CE

Delivery form: Heavy-duty export fumigated wooden drums or steel subsea reels
Standard lengths: 500 m, 1,000 m or custom continuous subsea/wellbore lengths
MOQ: 100 m (standard configurations) · 500 m (custom builds)
Lead time: 2–5 weeks ex-works
Incoterms: EXW, FCA, FOB, CIF, DAP

Technical documents

Downloads

PDF800 / 07 / 1 0.6/1 kV 800m Deep-Well Potable Water Pump Cable – technical datasheet3 sizes · construction, technical data, approvals XLSX800 / 07 / 1 spec data (Excel)All 3 sizes with dimensions and data, for your BOM or quotation

Revision: 2026-10-25
Updated: 2026-10-25

FAQ

Questions engineers ask first

Not covered here? Send your drawing — an engineer replies within 2 business hours.

What governing standard and construction define 800 / 07 / 1 (800 / 07 / 1 0.6/1 kV 800m Deep-Well Potable Water Pump Cable)?

800 / 07 / 1 (800 / 07 / 1 0.6/1 kV 800m Deep-Well Potable Water Pump Cable) is manufactured in accordance with DIN VDE 0282 / UK WRAS / ACS / KTW-W270 / DM 174 for 0.6/1 kV service over -25 °C to +80 °C. Its 4-layer construction comprises class 5 tinned copper conductors (4g16), high-modulus waterproof epr (ei7 / 3gi3) and quad-certified blue food-grade sheath.

What is the minimum bending radius and operating temperature range for 800 / 07 / 1?

The minimum bending radius for 800 / 07 / 1 is 6 × OD across its continuous operating temperature range of -25 °C to +80 °C, ensuring mechanical and dielectric reliability in subsea, marine and submersible service.

How are the concentric layers of 800 / 07 / 1 arranged from inside to outside?

From inside to outside, the construction sequence is: (01) Class 5 Tinned Copper Conductors (4G16) — IEC 60228 / VDE 0295 Class 5 flexible annealed tinned copper conductors; (02) High-Modulus Waterproof EPR (EI7 / 3GI3) — 0.6/1 kV water-resistant EPR insulation color-coded Brown, Black, Grey & G/Y; (03) Inner Waterproof Sheath Layer (800 m) — Extruded waterproof elastomeric inner bedding resisting 80 bar hydrostatic pressure; (04) Quad-Certified Blue Food-Grade Sheath — Cross-linked 5GM3/EM2 elastomer certified to UK WRAS, ACS, KTW/W270 & DM 174/04.

What factory test certificates are supplied with 800 / 07 / 1?

Every production drum of 800 / 07 / 1 undergoes routine conductor resistance/continuity, high-voltage dielectric and dimensional testing per DIN VDE 0282 / UK WRAS / ACS / KTW-W270 / DM 174, and is delivered with an EN 10204 3.1 factory test certificate.

Request a quote

Get an engineering quote for 800 / 07 / 1

Your selection and application details are copied into the enquiry form below.

01Selected sizes

Use + Add next to a size or configuration.

02Reel & motion

Add your operating conditions here to include them in your enquiry.

Reel typeDrum core diameter (mm)Cable length on drum (m)Travel speed (m/min)Max. accelerationCycles per hourLength and quantityAmbient temperatureExposure (outdoor, water, oil, abrasion)Destination countryEquipment and operating conditions

03Message for our engineers

800 / 07 / 1 0.6/1 kV 800m Deep-Well Potable Water Pump Cable

Selected sizes:


Reel & motion:
- Reel type: 
- Drum core diameter (mm): 
- Cable length on drum (m): 
- Travel speed (m/min): 
- Max. acceleration: 
- Cycles per hour: 
- Length and quantity: 
- Ambient temperature: 
- Exposure (outdoor, water, oil, abrasion): 
- Destination country: 
- Equipment and operating conditions:

Send via WhatsApp