1 / 5

Product

submersible water-quality, CTD & ocean sensor cable ISO 15839 / IEC 60770300 V (-30 to +80 °C)Subsea / Marine Outer Protective She

Vented TPU Water Quality CableISO 15839 / IEC 60770 — 300 V — -30 to +80 °C Subsea & Marine Cable

Vented TPU Water Quality Cable featuring central atmospheric vent tube and subsea / marine outer protective sheath (ISO 15839 / IEC 60770, 300 V, -30 to +80 °C, min. bend radius 6 × OD).

Water-resistant

Oil-resistant

Outdoor & humid

Approved

Configuration

Order designation: Vented TPU Water Quality 2×2×0.50 mm²
Outer Ø ≈: 8.4 mm
Net weight ≈: 98 kg/km
Max. pulling ≈: 2.5 kN
Core / stranding: Stranded SnCu + Foil/TCWB + Subsea PUR

All sizes (3)

Request a quote Datasheet WhatsApp info@tebaoflex.com

Engineering reply in 2 business hoursCut-to-length export drumsEN 10204 3.1 certificate per drum

Rated voltage: 300 V
Operating temp.: −30…+80 °C
Min. bend radius: 6 × OD
Core / conductor: Central Atmosphe
Outer protection: Subsea / Marine
Standard: ISO 15839 / IEC

Typical values for this cable type, based on ISO 15839 Vented TPU Submersible Water Quality & Level Sensor Specification — confirmed in the datasheet and quotation for your order.

Application fit

Is Vented TPU Water Quality right for your machine?

Vented TPU Water Quality Cable featuring central atmospheric vent tube and subsea / marine outer protective sheath (ISO 15839 / IEC 60770, 300 V, -30 to +80 °C, min. bend radius 6 × OD).

Immersion & wet locations

Suitable

Hydrolysis-resistant ether-grade PUR/TPU jackets, water-blocked cores and optional atmospheric vent tubes support permanent immersion.

Free-hanging vertical run

Suitable

Integrated aramid yarns or galvanized steel wire armour allow direct vertical probe suspension in sea cages, wells and stilling tubes.

Fixed installation

Suitable

Foil plus tinned copper braid screening protects low-level mV, 4–20 mA, SDI-12, RS-485 and optical DO signals from pump VFD noise.

Offshore platform & shipboard deck trays

Suitable

Resists bio-fouling cleaning agents, saline splash, sunlight and −30/−40 °C winter freeze around open aquaculture tanks.

Energy chain / drag chain

Not suitable

Submersible water-quality probe cables are designed for static/suspended immersion rather than high-speed machine drag chains.

Use CF211.PUR Encoder Chain Cable

Typical machinesUnderwater & Ocean ExplorationAquaculture Dissolved Oxygen (DO), pH & Salinity MonitoringVented Hydrostatic Water-Level & Borehole Pressure ProbesOceanographic CTD Rosettes, Current Meters & Mooring BuoysRecirculating Aquaculture (RAS) & Wastewater Sensor Networks

Construction

Layer by layer

Shown: Vented TPU Water Quality (ISO 15839 Vented TPU Submersible Water Quality & Level Sensor Specification) featuring central atmospheric vent tube, 22/24 awg tinned copper sensor cores and subsea / marine outer protective sheath (3-layer construction).

Vented TPU Water Quality — stepped horizontal cutaway showing Central Atmospheric Vent Tube and Subsea / Marine Outer — Layer cutaway

#	Layer	Material & reference
1	Central Atmospheric Vent Tube	Breather capillary tube for hydrostatic depth/level compensation
2	22/24 AWG Tinned Copper Sensor Cores	Six color-coded conductors with Fluoropolymer (FEP/ETFE) high-dielectric insulation
3	Subsea / Marine Outer Protective Sheath	Black hydrolysis- & abrasion-resistant marine Polyurethane (PUR) outer sheath

Vented TPU Water Quality — Standard Subsea & Marine Execution

Built to ISO 15839 Vented TPU Submersible Water Quality & Level Sensor Specification with central atmospheric vent tube and subsea / marine outer protective sheath

Vented TPU Water Quality — Custom Winch Length / Molded Termination

Available on continuous export winch drums or factory-terminated with subsea wet-mate / mechanical sockets

Vented TPU Water Quality — Hydrostatic & Routine Certified

Supplied with EN 10204 3.1 routine dielectric, conductor/optical continuity & hydrostatic qualification report

Technical data

Ratings & operating limits

Typical values: Typical values for this cable type, based on ISO 15839 Vented TPU Submersible Water Quality & Level Sensor Specification. Values for your order are confirmed in the datasheet and quotation.

Electrical

Rated voltage / operating system: 300 V (ISO 15839 Vented TPU Submersible Water Quality & Level Sensor Specification)
Core / conductor construction: Central Atmospheric Vent Tube — Breather capillary tube for hydrostatic depth/level compensation
Primary dielectric / optical buffer: 22/24 AWG Tinned Copper Sensor Cores — Six color-coded conductors with Fluoropolymer (FEP/ETFE) high-dielectric insulation

Thermal

Continuous operating temperature: −30…+80 °C (submerged seawater & topside deck service)
Hydrostatic & thermal cycling endurance: Verified cold-bend and wet dielectric stability across −30…+80 °C per ISO 15839 Vented TPU Submersible Water Quality & Level Sensor Specification
Storage & transport temperature: −40…+80 °C on export wooden/steel cable drum

Mechanical

Outer jacket / sheath protection: Subsea / Marine Outer Protective Sheath — Black hydrolysis- & abrasion-resistant marine Polyurethane (PUR) outer sheath
Minimum bending radius: 6 × OD
Reinforcement / screen / bedding layer: 22/24 AWG Tinned Copper Sensor Cores — Six color-coded conductors with Fluoropolymer (FEP/ETFE) high-dielectric insulation

Resistance

Seawater, hydrolysis & oil resistance: Resistant to permanent seawater immersion, hydrolysis, hydraulic oil and bio-fouling per ISO 15839 Vented TPU Submersible Water Quality & Level Sensor Specification
Hydrostatic pressure & water blocking: Radial and longitudinal water-blocking integrity verified per ISO 15839 Vented TPU Submersible Water Quality & Level Sensor Specification
RoHS & REACH compliance: RoHS 2 (2011/65/EU + 2015/863) & REACH SVHC compliant

Reference standards

Governing standard: ISO 15839 Vented TPU Submersible Water Quality & Level Sensor Specification
Subsea & conductor qualification standards: IEC 60228 / DNV-ST-E402 / ISO 13628-5 / IEC 60794 / EN 10204
Quality management & inspection: ISO 9001:2015 & EN 10204 3.1 factory routine inspection

Identification

Model designation: Vented TPU Water Quality
Sheath colour & metre marking: Continuous metre-marked black outer finish (Subsea / Marine )
Customs tariff (HS): 8544.49 / 8544.60 / 8544.70

Sizes

3 standard Vented TPU Water Quality configurations

Manufactured to ISO 15839 Vented TPU Submersible Water Quality & Level Sensor Specification for subsea robotics, ROV umbilicals, marine aquaculture and offshore sensor applications.

Dimensions, tensile load & weights
Order designation	Configuration	Core / stranding	Outer Ø ≈ mm	Net weight ≈ kg/km	Max. pulling kN ≈	Min. bend R mm
Vented TPU Water Quality Construction Schedule (−30…+80 °C)
Vented TPU Water Quality 2×2×0.50 mm²	2 × 2 × 0.50 mm² (20 AWG) + Vent/Drain	Stranded SnCu + Foil/TCWB + Subsea PUR	8.4	98	2.5	50
Vented TPU Water Quality 4×2×0.50 + 2×1.5	4 × 2 × 0.50 + 2 × 1.5 mm² Hybrid	Stranded SnCu + Individual/Overall Shield	11.8	195	5.2	70
Vented TPU Water Quality 4×2×0.75 + 4×2.5	4 × 2 × 0.75 + 4 × 2.5 mm² Subsea	Stranded SnCu + Aramid/Armour + PUR	15.2	360	12.0	95

Typical values for this cable type; dimensions and weights for your order are confirmed in the quotation.
Custom core counts, optical fiber channels, wet-mate terminations and continuous winch lengths available per ISO 15839 Vented TPU Submersible Water Quality & Level Sensor Specification.

Electrical, optical & thermal parameters
Configuration	Max. DC R₂₀ Ω/km	Rating / Impedance / Load	Operating temp.
2 × 2 × 0.50 mm² (20 AWG) + Vent/Drain	39.00	300 V (4–20 mA / DO)	−30…+80 °C
4 × 2 × 0.50 + 2 × 1.5 mm² Hybrid	39.00	300 V (CTD / Multi-Sensor)	−30…+80 °C
4 × 2 × 0.75 + 4 × 2.5 mm² Subsea	26.00	300 V (ROV / Camera / LED)	−30…+80 °C

Every production length undergoes routine conductor DC resistance / OTDR optical attenuation, AC dielectric and dimensional verification.

Quality & approvals

Testing & inspection

Routine tests on every production length, sample and type tests per batch — documented on an EN 10204 3.1 inspection certificate.

ConductorClass 5 stranding
Spark test100 % in-line
Lay-upCores, earth, fillers
SheathingInner, braid / screen, outer
Electrical testsAC voltage, resistance
DimensionsOD, wall thickness
Inspection documents & dispatchDrum & dispatch

Testing & inspection	Test value / reference	Frequency
Routine tests
Conductor DC resistance / OTDR optical & dimensional check (ISO 15839 Vented TPU Submersible Water Quality & Level Sensor Specification)	DC resistance at 20 °C, optical attenuation and wall thickness within ISO 15839 Vented TPU Submersible Water Quality & Level Sensor Specification limits	Every manufactured drum length
AC high-voltage dielectric & insulation resistance test (ISO 15839 Vented TPU Submersible Water Quality & Level Sensor Specification)	Zero dielectric breakdown and verified wet insulation resistance for 300 V rating	Every manufactured drum length
Sample tests
Hydrostatic pressure, tensile load & seawater immersion qualification (ISO 15839 Vented TPU Submersible Water Quality & Level Sensor Specification)	Verified hydrostatic pressure integrity, breaking load and flex endurance across −30…+80 °C	Type qualification & periodic lot audit

Inspection certificate

Issued with every drum, listing the routine test results for that length.

Product approvals

ISO 15839 / IEC 60770 CompliantEN 10204 3.1 Factory Test CertificateCE, RoHS 2 (2011/65/EU) & REACH

Company certificates

ISO 9001ISO 14001ISO 45001VDE marks approvalUL / cULCE · LVD / EMC

Marking & supply

Ordering & delivery

Sheath marking

TEBAOFLEX Vented TPU Water Quality ISO 15839 / IEC 60770 300 V CE

Delivery form: Heavy-duty export fumigated wooden drums, steel winch reels or pre-terminated subsea assemblies
Standard lengths: 500 m, 1,000 m, 3,000 m continuous winch lengths or custom cut-to-length subsea jumpers
MOQ: 100 m (standard configurations) · 300 m (custom subsea builds)
Lead time: 2–4 weeks ex-works
Incoterms: EXW, FCA, FOB, CIF, DAP

Technical documents

Downloads

PDFVented TPU Water Quality Cable – technical datasheet3 sizes · construction, technical data, approvals XLSXVented TPU Water Quality spec data (Excel)All 3 sizes with dimensions and data, for your BOM or quotation

Revision: 2026-10-29
Updated: 2026-10-29

FAQ

Questions engineers ask first

Not covered here? Send your drawing — an engineer replies within 2 business hours.

What governing standard and construction define Vented TPU Water Quality (Vented TPU Water Quality Cable)?

Vented TPU Water Quality (Vented TPU Water Quality Cable) is manufactured in accordance with ISO 15839 Vented TPU Submersible Water Quality & Level Sensor Specification for 300 V subsea,ROV and marine aquaculture service over -30 to +80 °C. Its 3-layer construction comprises central atmospheric vent tube, 22/24 awg tinned copper sensor cores and subsea / marine outer protective sheath.

What is the minimum bending radius and operating temperature range for Vented TPU Water Quality?

The minimum bending radius for Vented TPU Water Quality is 6 × OD across its continuous operating temperature range of -30 to +80 °C, ensuring mechanical flex endurance and hydrostatic reliability in subsea winches, TMS cages and aquaculture installations.

How are the concentric layers of Vented TPU Water Quality arranged from inside to outside?

From inside to outside, the construction sequence is: (01) Central Atmospheric Vent Tube — Breather capillary tube for hydrostatic depth/level compensation; (02) 22/24 AWG Tinned Copper Sensor Cores — Six color-coded conductors with Fluoropolymer (FEP/ETFE) high-dielectric insulation; (03) Subsea / Marine Outer Protective Sheath — Black hydrolysis- & abrasion-resistant marine Polyurethane (PUR) outer sheath.

What factory test certificates are supplied with Vented TPU Water Quality?

Every production drum of Vented TPU Water Quality undergoes routine conductor DC resistance / optical OTDR continuity, AC high-voltage dielectric and dimensional testing per ISO 15839 Vented TPU Submersible Water Quality & Level Sensor Specification, and is delivered with an EN 10204 3.1 factory test certificate.

Request a quote

Get an engineering quote for Vented TPU Water Quality

Your selection and application details are copied into the enquiry form below.

01Selected sizes

Use + Add next to a size or configuration.

02Reel & motion

Add your operating conditions here to include them in your enquiry.

Reel typeDrum core diameter (mm)Cable length on drum (m)Travel speed (m/min)Max. accelerationCycles per hourLength and quantityAmbient temperatureExposure (outdoor, water, oil, abrasion)Destination countryEquipment and operating conditions

03Message for our engineers

Vented TPU Water Quality Cable

Selected sizes:


Reel & motion:
- Reel type: 
- Drum core diameter (mm): 
- Cable length on drum (m): 
- Travel speed (m/min): 
- Max. acceleration: 
- Cycles per hour: 
- Length and quantity: 
- Ambient temperature: 
- Exposure (outdoor, water, oil, abrasion): 
- Destination country: 
- Equipment and operating conditions:

Send via WhatsApp