1 / 5

Product

CEI UNEL 35375 FG16HOHM16 CEI UNEL 35375 / CEI 20-380.6/1 kV−25…+90 °C

FG16HOHM16 0.6/1 kV HEPR-Insulated Individual & Overall Screened CableCEI UNEL 35375 / CEI 20-38 · 0.6/1 kV · -25 °C to +90 °C industrial FG16HOHM16 construction

FG16HOHM16 0.6/1 kV HEPR-Insulated Individual & Overall Screened LSZH Instrument Cable (FG16HOHM16) engineered to CEI UNEL 35375 / CEI 20-38 for 0.6/1 kV service across -25 °C to +90 °C, featuring stranded bare & tinned copper conductor and m16 lszh outer

Approved

Low-EMC design

EMC screen

Flame-retardant

Configuration

Order designation: FG16HOHM16 4×2×1.0
Outer Ø ≈: 13.5 mm
Total weight ≈: 264 kg/km
Min. bend R (fixed): 108 mm
Configuration: 4×2×1.0 mm²

All sizes (12)

Request a quote Datasheet WhatsApp info@tebaoflex.com

Engineering reply in 2 business hoursCut-to-length export drumsEN 10204 3.1 certificate per drum

Rated voltage: 0.6/1 kV
Operating temp.: −25…+90 °C
Min. bend radius: 10 × OD
Conductor: bare & tinned
Outer layer: M16 LSZH outer
Standard: CEI UNEL 35375

Typical values for this cable type, based on CEI UNEL 35375 / CEI 20-38 — confirmed in the datasheet and quotation for your order.

Application fit

Is FG16HOHM16 right for your machine?

Fixed installation

Suitable

Engineered and verified for fixed service in accordance with CEI UNEL 35375 / CEI 20-38.

Switchgear & control cabinet wiring

Suitable

Suitable for switchgear, control panels and equipment terminations within 10 × OD bend radius.

TBM gantry & advancing tunnel reel

With conditions

Use mechanical conduit or armoured protection where exposed to rock fall or crushing loads.

Motorised monospiral reel

Not suitable

Not designed for high-speed monospiral crane reeling; select a dedicated reeling cable.

NSHTOU Reeling Cable

Typical machinesOil & Gas CableRefinery & Petrochemical Process UnitsLNG Terminals & Tank FarmsOnshore & Offshore Oil & Gas FacilitiesChemical & Hydrocarbon Processing PlantsCommercial & Residential Building Distribution

Construction

Layer by layer

Shown: FG16HOHM16 (CEI UNEL 35375 / CEI 20-38) with stranded bare & tinned copper conductor, polyester pair wrap and m16 lszh outer sheath (7-layer construction).

Schematic, not to scale — generated from the layer data

#	Layer	Material & reference
1	Stranded bare & tinned copper conductor	High-conductivity bare & tinned copper conductor per CEI UNEL 35375 / CEI 20-38CEI UNEL 35375 / CEI 20-38
2	Polyester pair wrap	Helically applied polyester pair wrapCEI UNEL 35375 / CEI 20-38
3	Al/PET individual screen	Al/PET individual screen metallic electromagnetic screen (individual core / group layer)CEI UNEL 35375 / CEI 20-38
4	PET polyester overwrap	Helically applied pet polyester overwrapCEI UNEL 35375 / CEI 20-38
5	EPR G16 core insulation	Extruded EPR G16 dielectric (individual core / group layer)CEI UNEL 35375 / CEI 20-38
6	Overall copper braid	Overall copper braid high-coverage braided layer (woven structure)CEI UNEL 35375 / CEI 20-38
7	M16 LSZH outer sheath	Extruded M16 LSZH outer sheath protective layer (continuous layer)CEI UNEL 35375 / CEI 20-38

FG16HOHM16 — Standard Execution

Built to CEI UNEL 35375 / CEI 20-38 with stranded bare & tinned copper conductor and m16 lszh outer sheath

FG16HOHM16 — Custom Cross-Sections

Full range of metric mm² and AWG/kcmil conductor sizes per CEI UNEL 35375 / CEI 20-38

FG16HOHM16 — Export Drum Supply

Supplied with EN 10204 3.1 routine dielectric & conductor resistance test certificate

Technical data

Ratings & operating limits

Typical values: Typical values for this cable type, based on CEI UNEL 35375 / CEI 20-38. Values for your order are confirmed in the datasheet and quotation.

Electrical

Rated voltage / duty: 0.6/1 kV (CEI UNEL 35375 / CEI 20-38)
Conductor construction: Stranded bare & tinned copper conductor — High-conductivity bare & tinned copper conductor per CEI UNEL 35375 / CEI 20-38
Primary insulation / dielectric: Polyester pair wrap — Helically applied polyester pair wrap

Thermal

Continuous operating temperature: −25…+90 °C per CEI UNEL 35375 / CEI 20-38
Short-circuit / peak thermal limit: +160 °C to +250 °C (5 s adiabatic limit depending on dielectric class)
Minimum installation temperature: −5 °C (thermoplastic) / −25 °C (cross-linked or elastomer) / −40 °C (metallic)

Mechanical

Outer protection / covering: M16 LSZH outer sheath — Extruded M16 LSZH outer sheath protective layer (continuous layer)
Minimum bending radius: 10 × OD (installed / static routing)
Layer count & geometry: 7 concentric/structural layers verified by cross-section inspection

Resistance

Environmental & chemical durability: Engineered for industrial service in accordance with CEI UNEL 35375 / CEI 20-38
RoHS & REACH compliance: RoHS 2 (2011/65/EU + 2015/863) & REACH SVHC compliant

Reference standards

Governing product standard: CEI UNEL 35375 / CEI 20-38
Quality management & inspection: ISO 9001:2015 & EN 10204 3.1 factory routine inspection

Identification

Model designation: FG16HOHM16
Customs tariff (HS): 8544.49 / 8544.60 / 7614.10

Sizes

12 standard FG16HOHM16 cable configurations

Manufactured to CEI UNEL 35375 / CEI 20-38 in single-pair, multi-pair and multi-unit constructions.

Dimensions, construction & weights
Order designation	Configuration	Outer Ø ≈ mm	Weight ≈ kg/km	Min. bend R fixed mm
FG16HOHM16 Standard Construction Schedule (0.6/1 kV · −25…+90 °C)
FG16HOHM16 1×2×0.5	1×2×0.5 mm²	6.4	58	52
FG16HOHM16 2×2×0.5	2×2×0.5 mm²	9.2	112	74
FG16HOHM16 4×2×0.5	4×2×0.5 mm²	11.4	176	92
FG16HOHM16 8×2×0.5	8×2×0.5 mm²	14.8	295	118
FG16HOHM16 12×2×0.5	12×2×0.5 mm²	17.6	420	141
FG16HOHM16 1×2×1.0	1×2×1.0 mm²	7.6	86	61
FG16HOHM16 2×2×1.0	2×2×1.0 mm²	11.0	168	88
FG16HOHM16 4×2×1.0	4×2×1.0 mm²	13.5	264	108
FG16HOHM16 8×2×1.0	8×2×1.0 mm²	17.9	465	143
FG16HOHM16 1×2×1.5	1×2×1.5 mm²	8.5	114	68
FG16HOHM16 4×2×1.5	4×2×1.5 mm²	15.2	348	122
FG16HOHM16 12×2×1.5	12×2×1.5 mm²	23.4	860	187

Typical values for this cable type; dimensions and weights for your order are confirmed in the quotation.
Additional pair/triad/quad counts (up to 48 pairs) and blue Ex-i intrinsically safe outer sheaths available per CEI UNEL 35375 / CEI 20-38.

Electrical parameters by conductor cross-section
Conductor size	Max. DC R₂₀ Ω/km	Mutual cap. ≈ nF/km	Inductance ≈ mH/km
0.50 mm² (7/0.30 mm · AWG 20)	39.00	115	0.65
0.75 mm² (7/0.37 mm · AWG 18)	26.00	120	0.62
1.00 mm² (7/0.43 mm · AWG 17)	19.50	125	0.60
1.50 mm² (7/0.53 mm · AWG 16)	13.30	135	0.58
2.50 mm² (7/0.67 mm · AWG 14)	7.98	145	0.55

L/R ratio ≤ 25 µH/Ω (0.5–1.0 mm²) and ≤ 40 µH/Ω (1.5 mm²) for intrinsically safe Ex-i circuits.

Quality & approvals

Testing & inspection

Routine tests on every production length, sample and type tests per batch — documented on an EN 10204 3.1 inspection certificate.

ConductorClass 5 stranding
Spark test100 % in-line
Lay-upCores, earth, fillers
SheathingInner, braid / screen, outer
Electrical testsAC voltage, resistance
DimensionsOD, wall thickness
Inspection documents & dispatchDrum & dispatch

Testing & inspection	Test value / reference	Frequency
Routine tests
Conductor DC resistance & dimensional verification (CEI UNEL 35375 / CEI 20-38)	DC resistance at 20 °C and geometry within CEI UNEL 35375 / CEI 20-38 class limits	Every manufactured drum / spool
Routine dielectric / spark / structural integrity test (CEI UNEL 35375 / CEI 20-38)	Zero breakdown or structural defect over full production length	Every manufactured drum / spool
Sample tests
Thermal aging, mechanical & material qualification (CEI UNEL 35375 / CEI 20-38)	Full compliance with CEI UNEL 35375 / CEI 20-38 across −25…+90 °C	Type qualification & periodic sample audit

Inspection certificate

Issued with every drum, listing the routine test results for that length.

Product approvals

CEI UNEL 35375 CompliantEN 10204 3.1 Routine Test CertificateCE, RoHS 2 (2011/65/EU) & REACH

Company certificates

ISO 9001ISO 14001ISO 45001VDE marks approvalUL / cULCE · LVD / EMC

Marking & supply

Ordering & delivery

Sheath marking

TEBAOFLEX FG16HOHM16 <size> CEI UNEL 35375 0.6/1 kV CE

Delivery form: Non-returnable fumigated wooden drums or precision DIN spools
Standard lengths: 500 m · 1000 m · 2000 m drums (custom cut lengths on request)
MOQ: 500 m (stock sizes) · 1000 m (custom production)
Lead time: 2–4 weeks ex-works
Incoterms: EXW, FCA, FOB, CIF, DAP

Technical documents

Downloads

PDFFG16HOHM16 0.6/1 kV HEPR-Insulated Individual & Overall Screened – technical datasheet12 sizes · construction, technical data, approvals XLSXFG16HOHM16 spec data (Excel)All 12 sizes with dimensions and data, for your BOM or quotation

Revision: 2026-10-21
Updated: 2026-10-21

FAQ

Questions engineers ask first

Not covered here? Send your drawing — an engineer replies within 2 business hours.

What governing standard and construction define FG16HOHM16 (FG16HOHM16 0.6/1 kV HEPR-Insulated Individual & Overall Screened LSZH Instrument Cable)?

FG16HOHM16 (FG16HOHM16 0.6/1 kV HEPR-Insulated Individual & Overall Screened LSZH Instrument Cable) is manufactured in accordance with CEI UNEL 35375 / CEI 20-38 for 0.6/1 kV service over -25 °C to +90 °C. Its 7-layer construction comprises stranded bare & tinned copper conductor, polyester pair wrap, al/pet individual screen, pet polyester overwrap, epr g16 core insulation, overall copper braid, m16 lszh outer sheath.

What is the minimum bending radius and installation temperature for FG16HOHM16?

The minimum installed bending radius for FG16HOHM16 is 10 × OD across its continuous operating temperature range of -25 °C to +90 °C, ensuring mechanical and dielectric stability without conductor or insulation strain.

How are the concentric layers of FG16HOHM16 arranged from inside to outside?

From inside to outside, the construction sequence is: (01) Stranded bare & tinned copper conductor (High-conductivity bare & tinned copper conductor per CEI UNEL 35375 / CEI 20-38); (02) Polyester pair wrap (Helically applied polyester pair wrap); (03) Al/PET individual screen (Al/PET individual screen metallic electromagnetic screen (individual core / group layer)); (04) PET polyester overwrap (Helically applied pet polyester overwrap); (05) EPR G16 core insulation (Extruded EPR G16 dielectric (individual core / group layer)); (06) Overall copper braid (Overall copper braid high-coverage braided layer (woven structure)); (07) M16 LSZH outer sheath (Extruded M16 LSZH outer sheath protective layer (continuous layer)).

What factory test certificates are supplied with FG16HOHM16?

Every production drum or spool of FG16HOHM16 undergoes routine conductor DC resistance, dimensional and dielectric/integrity testing per CEI UNEL 35375 / CEI 20-38, and is delivered with an EN 10204 3.1 factory test certificate.

Request a quote

Get an engineering quote for FG16HOHM16

Your selection and application details are copied into the enquiry form below.

01Selected sizes

Use + Add next to a size or configuration.

02Reel & motion

Add your operating conditions here to include them in your enquiry.

Reel typeDrum core diameter (mm)Cable length on drum (m)Travel speed (m/min)Max. accelerationCycles per hourLength and quantityAmbient temperatureExposure (outdoor, water, oil, abrasion)Destination countryEquipment and operating conditions

03Message for our engineers

FG16HOHM16 0.6/1 kV HEPR-Insulated Individual & Overall Screened Cable

Selected sizes:


Reel & motion:
- Reel type: 
- Drum core diameter (mm): 
- Cable length on drum (m): 
- Travel speed (m/min): 
- Max. acceleration: 
- Cycles per hour: 
- Length and quantity: 
- Ambient temperature: 
- Exposure (outdoor, water, oil, abrasion): 
- Destination country: 
- Equipment and operating conditions:

Send via WhatsApp