1 / 5

Product

heavy-duty subsea mining, trencher & excavation trailing cable AS/NZS 1802 / AS/NZS 28021.1/1.1 kV (-25 to +90 °C)Subsea / Marine Outer Protective She

AS/NZS 1802 Type 210 Heavy Reeling Mining CableAS/NZS 1802 / AS/NZS 2802 — 1.1/1.1 kV — -25 to +90 °C Subsea & Marine Cable

AS/NZS 1802 Type 210 Heavy Reeling Mining Cable featuring main phase conductors (3 cores) and subsea / marine outer protective sheath (AS/NZS 1802 / AS/NZS 2802, 1.1/1.1 kV, -25 to +90 °C, min. bend radius 6 × OD).

Water-resistant

Oil-resistant

Outdoor & humid

Approved

Configuration

Order designation: AS/NZS 1802 Type 210 R 4G4.0 mm²
Outer Ø ≈: 14.2 mm
Net weight ≈: 340 kg/km
Max. pulling ≈: 3.2 kN
Core / stranding: IEC 60228 Class 5 Cu/SnCu

All sizes (3)

Request a quote Datasheet WhatsApp info@tebaoflex.com

Engineering reply in 2 business hoursCut-to-length export drumsEN 10204 3.1 certificate per drum

Rated voltage: 1.1/1.1 kV
Operating temp.: −25…+90 °C
Min. bend radius: 6 × OD
Core / conductor: Main Phase Condu
Outer protection: Subsea / Marine
Standard: AS/NZS 1802 / AS

Typical values for this cable type, based on AS/NZS 1802 & AS/NZS 2802 Type 210 Heavy Reeling & Trailing Mining Standard — confirmed in the datasheet and quotation for your order.

Application fit

Is AS/NZS 1802 Type 210 Reeling Mining right for your machine?

Trailing & towing

Suitable

Extra-heavy polychloroprene/CSM elastomer jackets and symmetrical earth/pilot cores survive severe seabed rock abrasion and crawler drag.

Cylindrical / multi-layer drum

Suitable

Aramid anti-torsion textile reinforcement supports mobile reeling drums on subsea trenching ploughs, cutter-suction dredgers and mine shov

Immersion & wet locations

Suitable

Vulcanized dual-layer rubber sheath resists high-pressure seawater immersion, benthic mud, oil and acid mine water.

Offshore platform & shipboard deck trays

Suitable

Withstands extreme mechanical crush, impact and UV exposure on mining support vessels and open-cast excavation benches.

Energy chain / drag chain

Not suitable

Large-diameter mining and subsea trencher trailing cables are not intended for compact factory energy chains.

Use FD 855 P Power Chain Cable

Typical machinesMining & TunnellingDeep-Sea Polymetallic Nodule Mining Collectors & RisersSubsea Pipeline Ploughs, Jet Trenchers & Rock CuttersAS/NZS 1802 & VDE MTO Open-Cast Mining Shovels & DraglinesSubmersible Dredging Pumps & Underwater Tunneling Machines

Construction

Layer by layer

Shown: AS/NZS 1802 Type 210 Reeling Mining (AS/NZS 1802 & AS/NZS 2802 Type 210 Heavy Reeling & Trailing Mining Standard) featuring main phase conductors (3 cores), interstitial split earth / pilot cores (3 cores) and subsea / marine outer protective sheath (3-layer construction).

AS/NZS 1802 Type 210 Reeling Mining — stepped horizontal cutaway showing Main Phase Conductors (3 Cores) and Subsea / — Layer cutaway

#	Layer	Material & reference
1	Main Phase Conductors (3 Cores)	Flexible stranded copper conductors with Ethylene-propylene rubber (EPR/EPDM) insulation
2	Interstitial Split Earth / Pilot Cores (	Symmetrical ground & pilot monitoring conductors in outer valleys
3	Subsea / Marine Outer Protective Sheath	Black heavy-duty polychloroprene (PCP / EM2 / SGM5) submersible rubber sheath

AS/NZS 1802 Type 210 Reeling Mining — Standard Subsea & Marine Execution

Built to AS/NZS 1802 & AS/NZS 2802 Type 210 Heavy Reeling & Trailing Mining Standard with main phase conductors (3 cores) and subsea / marine outer protective sheath

AS/NZS 1802 Type 210 Reeling Mining — Custom Winch Length / Molded Termination

Available on continuous export winch drums or factory-terminated with subsea wet-mate / mechanical sockets

AS/NZS 1802 Type 210 Reeling Mining — Hydrostatic & Routine Certified

Supplied with EN 10204 3.1 routine dielectric, conductor/optical continuity & hydrostatic qualification report

Technical data

Ratings & operating limits

Typical values: Typical values for this cable type, based on AS/NZS 1802 & AS/NZS 2802 Type 210 Heavy Reeling & Trailing Mining Standard. Values for your order are confirmed in the datasheet and quotation.

Electrical

Rated voltage / operating system: 1.1/1.1 kV (AS/NZS 1802 & AS/NZS 2802 Type 210 Heavy Reeling & Trailing Mining Standard)
Core / conductor construction: Main Phase Conductors (3 Cores) — Flexible stranded copper conductors with Ethylene-propylene rubber (EPR/EPDM) insulation
Primary dielectric / optical buffer: Interstitial Split Earth / Pilot Cores (3 Cores) — Symmetrical ground & pilot monitoring conductors in outer valleys

Thermal

Continuous operating temperature: −25…+90 °C (submerged seawater & topside deck service)
Hydrostatic & thermal cycling endurance: Verified cold-bend and wet dielectric stability across −25…+90 °C per AS/NZS 1802 & AS/NZS 2802 Type 210 Heavy Reeling & Trailing Mining Standard
Storage & transport temperature: −40…+80 °C on export wooden/steel cable drum

Mechanical

Outer jacket / sheath protection: Subsea / Marine Outer Protective Sheath — Black heavy-duty polychloroprene (PCP / EM2 / SGM5) submersible rubber sheath
Minimum bending radius: 6 × OD
Reinforcement / screen / bedding layer: Interstitial Split Earth / Pilot Cores (3 Cores) — Symmetrical ground & pilot monitoring conductors in outer valleys

Resistance

Seawater, hydrolysis & oil resistance: Resistant to permanent seawater immersion, hydrolysis, hydraulic oil and bio-fouling per AS/NZS 1802 & AS/NZS 2802 Type 210 Heavy Reeling & Trailing Mining Standard
Hydrostatic pressure & water blocking: Radial and longitudinal water-blocking integrity verified per AS/NZS 1802 & AS/NZS 2802 Type 210 Heavy Reeling & Trailing Mining Standard
RoHS & REACH compliance: RoHS 2 (2011/65/EU + 2015/863) & REACH SVHC compliant

Reference standards

Governing standard: AS/NZS 1802 & AS/NZS 2802 Type 210 Heavy Reeling & Trailing Mining Standard
Subsea & conductor qualification standards: IEC 60228 / DNV-ST-E402 / ISO 13628-5 / IEC 60794 / EN 10204
Quality management & inspection: ISO 9001:2015 & EN 10204 3.1 factory routine inspection

Identification

Model designation: AS/NZS 1802 Type 210 Reeling Mining
Sheath colour & metre marking: Continuous metre-marked black outer finish (Subsea / Marine )
Customs tariff (HS): 8544.49 / 8544.60 / 8544.70

Sizes

3 standard AS/NZS 1802 Type 210 Reeling Mining configurations

Manufactured to AS/NZS 1802 & AS/NZS 2802 Type 210 Heavy Reeling & Trailing Mining Standard for subsea robotics, ROV umbilicals, marine aquaculture and offshore sensor applications.

Dimensions, tensile load & weights
Order designation	Configuration	Core / stranding	Outer Ø ≈ mm	Net weight ≈ kg/km	Max. pulling kN ≈	Min. bend R mm
AS/NZS 1802 Type 210 Reeling Mining Construction Schedule (−25…+90 °C)
AS/NZS 1802 Type 210 R 4G4.0 mm²	4G4.0 mm² (3×4.0 + 1G4.0 / 12 AWG)	IEC 60228 Class 5 Cu/SnCu	14.2	340	3.2	85
AS/NZS 1802 Type 210 R 4G16 mm²	4G16 mm² (3×16 + 1G16 / 6 AWG)	IEC 60228 Class 5 Cu/SnCu	21.4	840	9.6	130
AS/NZS 1802 Type 210 R 3×50+1G25 mm²	3 × 50 + 1G25 mm² (or 3×70+1G35)	IEC 60228 Class 5 Cu/SnCu	32.8	2,240	26.5	195

Typical values for this cable type; dimensions and weights for your order are confirmed in the quotation.
Custom core counts, optical fiber channels, wet-mate terminations and continuous winch lengths available per AS/NZS 1802 & AS/NZS 2802 Type 210 Heavy Reeling & Trailing Mining Standard.

Electrical, optical & thermal parameters
Configuration	Max. DC R₂₀ Ω/km	Rating / Impedance / Load	Operating temp.
4G4.0 mm² (3×4.0 + 1G4.0 / 12 AWG)	4.95	1.1/1.1 kV (36 A Submersible)	−25…+90 °C
4G16 mm² (3×16 + 1G16 / 6 AWG)	1.21	1.1/1.1 kV (98 A Submersible)	−25…+90 °C
3 × 50 + 1G25 mm² (or 3×70+1G35)	0.39	1.1/1.1 kV (195 A Feeder)	−25…+90 °C

Every production length undergoes routine conductor DC resistance / OTDR optical attenuation, AC dielectric and dimensional verification.

Quality & approvals

Testing & inspection

Routine tests on every production length, sample and type tests per batch — documented on an EN 10204 3.1 inspection certificate.

ConductorClass 5 stranding
Spark test100 % in-line
Lay-upCores, earth, fillers
SheathingInner, braid / screen, outer
Electrical testsAC voltage, resistance
DimensionsOD, wall thickness
Inspection documents & dispatchDrum & dispatch

Testing & inspection	Test value / reference	Frequency
Routine tests
Conductor DC resistance / OTDR optical & dimensional check (AS/NZS 1802 & AS/NZS 2802 Type 210 Heavy Reeling & Trailing Mining Standard)	DC resistance at 20 °C, optical attenuation and wall thickness within AS/NZS 1802 & AS/NZS 2802 Type 210 Heavy Reeling & Trailing Mining Standard limits	Every manufactured drum length
AC high-voltage dielectric & insulation resistance test (AS/NZS 1802 & AS/NZS 2802 Type 210 Heavy Reeling & Trailing Mining Standard)	Zero dielectric breakdown and verified wet insulation resistance for 1.1/1.1 kV rating	Every manufactured drum length
Sample tests
Hydrostatic pressure, tensile load & seawater immersion qualification (AS/NZS 1802 & AS/NZS 2802 Type 210 Heavy Reeling & Trailing Mining Standard)	Verified hydrostatic pressure integrity, breaking load and flex endurance across −25…+90 °C	Type qualification & periodic lot audit

Inspection certificate

Issued with every drum, listing the routine test results for that length.

Product approvals

AS/NZS 1802 / AS/NZS 2802 CompliantEN 10204 3.1 Factory Test CertificateCE, RoHS 2 (2011/65/EU) & REACH

Company certificates

ISO 9001ISO 14001ISO 45001VDE marks approvalUL / cULCE · LVD / EMC

Marking & supply

Ordering & delivery

Sheath marking

TEBAOFLEX AS/NZS 1802 Type 210 Reeling Mining AS/NZS 1802 / AS/NZS 2802 1.1/1.1 kV CE

Delivery form: Heavy-duty export fumigated wooden drums, steel winch reels or pre-terminated subsea assemblies
Standard lengths: 500 m, 1,000 m, 3,000 m continuous winch lengths or custom cut-to-length subsea jumpers
MOQ: 100 m (standard configurations) · 300 m (custom subsea builds)
Lead time: 2–4 weeks ex-works
Incoterms: EXW, FCA, FOB, CIF, DAP

Technical documents

Downloads

PDFAS/NZS 1802 Type 210 Heavy Reeling Mining Cable – technical datasheet3 sizes · construction, technical data, approvals XLSXAS/NZS 1802 Type 210 Reeling Mining spec data (Excel)All 3 sizes with dimensions and data, for your BOM or quotation

Revision: 2026-10-29
Updated: 2026-10-29

FAQ

Questions engineers ask first

Not covered here? Send your drawing — an engineer replies within 2 business hours.

What governing standard and construction define AS/NZS 1802 Type 210 Reeling Mining (AS/NZS 1802 Type 210 Heavy Reeling Mining Cable)?

AS/NZS 1802 Type 210 Reeling Mining (AS/NZS 1802 Type 210 Heavy Reeling Mining Cable) is manufactured in accordance with AS/NZS 1802 & AS/NZS 2802 Type 210 Heavy Reeling & Trailing Mining Standard for 1.1/1.1 kV subsea,ROV and marine aquaculture service over -25 to +90 °C. Its 3-layer construction comprises main phase conductors (3 cores), interstitial split earth / pilot cores (3 cores) and subsea / marine outer protective sheath.

What is the minimum bending radius and operating temperature range for AS/NZS 1802 Type 210 Reeling Mining?

The minimum bending radius for AS/NZS 1802 Type 210 Reeling Mining is 6 × OD across its continuous operating temperature range of -25 to +90 °C, ensuring mechanical flex endurance and hydrostatic reliability in subsea winches, TMS cages and aquaculture installations.

How are the concentric layers of AS/NZS 1802 Type 210 Reeling Mining arranged from inside to outside?

From inside to outside, the construction sequence is: (01) Main Phase Conductors (3 Cores) — Flexible stranded copper conductors with Ethylene-propylene rubber (EPR/EPDM) insulation; (02) Interstitial Split Earth / Pilot Cores (3 Cores) — Symmetrical ground & pilot monitoring conductors in outer valleys; (03) Subsea / Marine Outer Protective Sheath — Black heavy-duty polychloroprene (PCP / EM2 / SGM5) submersible rubber sheath.

What factory test certificates are supplied with AS/NZS 1802 Type 210 Reeling Mining?

Every production drum of AS/NZS 1802 Type 210 Reeling Mining undergoes routine conductor DC resistance / optical OTDR continuity, AC high-voltage dielectric and dimensional testing per AS/NZS 1802 & AS/NZS 2802 Type 210 Heavy Reeling & Trailing Mining Standard, and is delivered with an EN 10204 3.1 factory test certificate.

Request a quote

Get an engineering quote for AS/NZS 1802 Type 210 Reeling Mining

Your selection and application details are copied into the enquiry form below.

01Selected sizes

Use + Add next to a size or configuration.

02Reel & motion

Add your operating conditions here to include them in your enquiry.

Reel typeDrum core diameter (mm)Cable length on drum (m)Travel speed (m/min)Max. accelerationCycles per hourLength and quantityAmbient temperatureExposure (outdoor, water, oil, abrasion)Destination countryEquipment and operating conditions

03Message for our engineers

AS/NZS 1802 Type 210 Heavy Reeling Mining Cable

Selected sizes:


Reel & motion:
- Reel type: 
- Drum core diameter (mm): 
- Cable length on drum (m): 
- Travel speed (m/min): 
- Max. acceleration: 
- Cycles per hour: 
- Length and quantity: 
- Ambient temperature: 
- Exposure (outdoor, water, oil, abrasion): 
- Destination country: 
- Equipment and operating conditions:

Send via WhatsApp