1 / 5

Product

Screened submersible mine dewatering pump cable AS/NZS 5000.10.6/1 kV + 4 Pilots500 m Submersible

15000BE (OGŁ) 0.6/1 kV Submersible Mine Pump Cable15000BE (OGŁ) 0.6/1 kV screened submersible mine dewatering and slurry pump cable rated to 500 m depth, combining 4 R-EP-90 EPR power/earth cores, 4 pilot cores, 85% tinned copper braid screen and a blue TPV elastomer sheath.

Engineered for underground mining, open-cast excavation, shaft infrastructure and heavy industrial service per AS/NZS 5000.1 / AS/NZS 1125 / PN-90/E-90100 across -25 to +90 °C.

Water-resistant

EMC screen

Oil-resistant

Low-EMC design

Configuration

Order designation: 15000BE (OGŁ) 4×25 + 4×1.5 mm²
Outer Ø ≈: 31.2 mm
Net weight ≈: 1,920 kg/km
Tensile rating ≈: 15.0 kN
Core / stranding: Class 5 tinned Cu

All sizes (3)

Request a quote Datasheet WhatsApp info@tebaoflex.com

Engineering reply in 2 business hoursCut-to-length export drumsEN 10204 3.1 certificate per drum

Rated voltage: 0.6/1 kV
Operating temp.: -25 to +90 °C
Min. bend radius: 8 × OD
Core / conductor: 4×16–50 + 4×1.5
Outer protection: Blue TPV Sheath
Standard: AS/NZS 5000.1

Typical values for this cable type, based on AS/NZS 5000.1 / AS/NZS 1125 / PN-90/E-90100 — confirmed in the datasheet and quotation for your order.

Application fit

Is 15000BE (OGŁ) right for your machine?

Engineered for underground mining, open-cast excavation, shaft infrastructure and heavy industrial service per AS/NZS 5000.1 / AS/NZS 1125 / PN-90/E-90100 across -25 to +90 °C.

Trailing & towing

Suitable

Engineered for heavy-duty mobile mining and industrial trailing duty per AS/NZS 5000.1 / AS/NZS 1125 / PN-90/E-90100.

Mine roadway & tunnel wall hangers

Suitable

Suitable for underground coal/hard-rock roadways, shuttle cars and quarry feeders (-25 to +90 °C).

Fixed installation

Suitable

Can be installed on cable trays, hangers and mobile skid interconnections within 8 × OD.

Festoon & line chain

Not suitable

Not optimized for high-speed overhead crane C-track festoon loops; select a dedicated festoon cable.

NGFLGÖU Flat Rubber Festoon Cable

Typical machinesMining & TunnellingUnderground Coal & Hard-Rock MiningOpen-Cast Excavators, Draglines & ShovelsVertical Mine Shafts, Hoists & BoreholesTunneling, Mineral Processing & Slurry Plants

Construction

Layer by layer

Shown: 15000BE (OGŁ) (AS/NZS 5000.1 / AS/NZS 1125 / PN-90/E-90100) featuring power & earth cores (4×25 mm²), thermistor/moisture pilots (4×1.5 mm²) and submersible blue tpv outer sheath (5-layer construction).

Schematic, not to scale — generated from the layer data

#	Layer	Material & reference
1	Power & Earth Cores (4×25 mm²)	Class 5 rope-stranded tinned copper + Red, White, Blue & G/Y R-EP-90 EPR
2	Thermistor/Moisture Pilots (4×1.5 mm²)	Four numbered black R-EP-90 EPR tinned copper monitoring cores in interstices
3	TPV Elastomer Inner Bedding	Extruded black thermoplastic vulcanizate inner sheath rounding core lay-up
4	Overall Tinned Copper Braid (85%)	85% coverage tinned copper braid for VFD EMC & mechanical earth fault protection
5	Submersible Blue TPV Outer Sheath	Heavy-duty oil-, acid- and abrasion-resistant blue TPV jacket (500 m depth)

15000BE (OGŁ) — Standard Mining Execution

Built to AS/NZS 5000.1 / AS/NZS 1125 / PN-90/E-90100 with power & earth cores (4×25 mm²) and submersible blue tpv outer sheath

15000BE (OGŁ) — Custom Drum Length & Gland Kit

Available in custom shaft/roadway drum lengths or pre-terminated assemblies

15000BE (OGŁ) — Routine & Flame Test Certified

Supplied with EN 10204 3.1 routine dielectric, resistance & flame test report

Technical data

Ratings & operating limits

Typical values: Typical values for this cable type, based on AS/NZS 5000.1 / AS/NZS 1125 / PN-90/E-90100. Values for your order are confirmed in the datasheet and quotation.

Electrical

Rated voltage / transmission duty: 0.6/1 kV (AS/NZS 5000.1 / AS/NZS 1125 / PN-90/E-90100)
Core / conductor construction: Power & Earth Cores (4×25 mm²) — Class 5 rope-stranded tinned copper + Red, White, Blue & G/Y R-EP-90 EPR
Primary dielectric / buffering: Thermistor/Moisture Pilots (4×1.5 mm²) — Four numbered black R-EP-90 EPR tinned copper monitoring cores in interstices

Thermal

Continuous operating temperature: -25 to +90 °C (mining & industrial service)
Short-circuit / peak thermal rating: Verified thermal stability per AS/NZS 5000.1 / AS/NZS 1125 / PN-90/E-90100
Storage & transport temperature: −40…+80 °C on export wooden/steel drum

Mechanical

Outer protection / armouring: Submersible Blue TPV Outer Sheath — Heavy-duty oil-, acid- and abrasion-resistant blue TPV jacket (500 m depth)
Minimum bending radius: 8 × OD
Crush, impact & abrasion duty: Heavy-duty mining rock-cut, impact and tensile protection per AS/NZS 5000.1 / AS/NZS 1125 / PN-90/E-90100

Resistance

Flame retardancy & mine fire safety: Self-extinguishing / flame-retardant mining jacket per AS/NZS 5000.1 / AS/NZS 1125 / PN-90/E-90100
Mine water, oil & chemical resistance: Resistant to acidic mine water, hydraulic oils and abrasion per AS/NZS 5000.1 / AS/NZS 1125 / PN-90/E-90100
RoHS & REACH compliance: RoHS 2 (2011/65/EU + 2015/863) & REACH SVHC compliant

Reference standards

Governing standard: AS/NZS 5000.1 / AS/NZS 1125 / PN-90/E-90100
Flame & environmental test standards: IEC 60332 / MSHA / EN 60794 / IEC 60228
Quality management & inspection: ISO 9001:2015 & EN 10204 3.1 factory routine inspection

Identification

Model designation: 15000BE (OGŁ)
Sheath colour & metre marking: Continuous metre-marked blue mining outer sheath
Customs tariff (HS): 8544.49 / 8544.60 / 8544.70

Sizes

3 standard 15000BE (OGŁ) mining & industrial configurations

Manufactured to AS/NZS 5000.1 / AS/NZS 1125 / PN-90/E-90100 for underground mining, open-cast excavation, shaft and heavy industrial systems.

Dimensions, tensile load & weights
Order designation	Configuration	Core / stranding	Outer Ø ≈ mm	Net weight ≈ kg/km	Tensile rating kN ≈	Min. bend R mm
15000BE (OGŁ) Construction Schedule (-25 to +90 °C)
15000BE (OGŁ) 4×16 + 4×1.5 mm²	4×16 mm² + 4×1.5 mm²	Class 5 tinned Cu	26.8	1,340	9.6	215
15000BE (OGŁ) 4×25 + 4×1.5 mm²	4×25 mm² + 4×1.5 mm²	Class 5 tinned Cu	31.2	1,920	15.0	250
15000BE (OGŁ) 4×35 + 4×1.5 mm²	4×35 mm² + 4×1.5 mm²	Class 5 tinned Cu	35.0	2,510	21.0	280

Typical values for this cable type; dimensions and weights for your order are confirmed in the quotation.
Custom core cross-sections, pair/fibre counts, armour grades and factory drum lengths available per AS/NZS 5000.1 / AS/NZS 1125 / PN-90/E-90100.

Electrical, optical & thermal parameters
Configuration	Max. DC R₂₀ / Atten. Ω/km or dB/km	Rating / Impedance	Operating temp.
4×16 mm² + 4×1.5 mm²	1.24	0.6/1 kV (98 A)	-25 to +90 °C
4×25 mm² + 4×1.5 mm²	0.80	0.6/1 kV (128 A)	-25 to +90 °C
4×35 mm² + 4×1.5 mm²	0.57	0.6/1 kV (158 A)	-25 to +90 °C

Every production length undergoes routine conductor DC resistance, high-voltage Spark/AC dielectric or OTDR continuity and dimensional verification.

Quality & approvals

Testing & inspection

Routine tests on every production length, sample and type tests per batch — documented on an EN 10204 3.1 inspection certificate.

ConductorClass 5 stranding
Spark test100 % in-line
Lay-upCores, earth, fillers
SheathingInner, braid / screen, outer
Electrical testsAC voltage, resistance
DimensionsOD, wall thickness
Inspection documents & dispatchDrum & dispatch

Testing & inspection	Test value / reference	Frequency
Routine tests
Conductor resistance, continuity & dimensional verification (AS/NZS 5000.1 / AS/NZS 1125 / PN-90/E-90100)	DC resistance at 20 °C / optical attenuation and outer diameter within AS/NZS 5000.1 / AS/NZS 1125 / PN-90/E-90100 tolerances	Every manufactured drum length
High-voltage dielectric & insulation resistance test (AS/NZS 5000.1 / AS/NZS 1125 / PN-90/E-90100)	Zero dielectric breakdown and verified insulation resistance over full production length	Every manufactured drum length
Sample tests
Flame propagation, mechanical crush & thermal ageing qualification (AS/NZS 5000.1 / AS/NZS 1125 / PN-90/E-90100)	Verified flame retardancy, mechanical integrity and thermal endurance across -25 to +90 °C	Type qualification & periodic lot audit

Inspection certificate

Issued with every drum, listing the routine test results for that length.

Product approvals

AS/NZS 5000.1 CompliantEN 10204 3.1 Factory Test CertificateCE, RoHS 2 (2011/65/EU) & REACH

Company certificates

ISO 9001ISO 14001ISO 45001VDE marks approvalUL / cULCE · LVD / EMC

Marking & supply

Ordering & delivery

Sheath marking

TEBAOFLEX 15000BE (OGŁ) AS/NZS 5000.1 0.6/1 kV CE

Delivery form: Heavy-duty export fumigated wooden drums or steel mine reels
Standard lengths: 500 m, 1,000 m or custom continuous shaft/reeling lengths
MOQ: 100 m (standard configurations) · 500 m (custom builds)
Lead time: 2–5 weeks ex-works
Incoterms: EXW, FCA, FOB, CIF, DAP

Technical documents

Downloads

PDF15000BE (OGŁ) 0.6/1 kV Submersible Mine Pump Cable – technical datasheet3 sizes · construction, technical data, approvals XLSX15000BE (OGŁ) spec data (Excel)All 3 sizes with dimensions and data, for your BOM or quotation

Revision: 2026-10-24
Updated: 2026-10-24

FAQ

Questions engineers ask first

Not covered here? Send your drawing — an engineer replies within 2 business hours.

What governing standard and construction define 15000BE (OGŁ) (15000BE (OGŁ) 0.6/1 kV Submersible Mine Pump Cable)?

15000BE (OGŁ) (15000BE (OGŁ) 0.6/1 kV Submersible Mine Pump Cable) is manufactured in accordance with AS/NZS 5000.1 / AS/NZS 1125 / PN-90/E-90100 for 0.6/1 kV duty over -25 to +90 °C. Its 5-layer construction comprises Power & Earth Cores (4×25 mm²), Thermistor/Moisture Pilots (4×1.5 mm²) and Submersible Blue TPV Outer Sheath.

What is the minimum bending radius and operating temperature range for 15000BE (OGŁ)?

The minimum bending radius for 15000BE (OGŁ) is 8 × OD across its continuous operating temperature range of -25 to +90 °C, ensuring mechanical and dielectric reliability in mining and heavy industrial service.

How are the concentric layers of 15000BE (OGŁ) arranged from inside to outside?

From inside to outside, the construction sequence is: (01) Power & Earth Cores (4×25 mm²) (Class 5 rope-stranded tinned copper + Red, White, Blue & G/Y R-EP-90 EPR); (02) Thermistor/Moisture Pilots (4×1.5 mm²) (Four numbered black R-EP-90 EPR tinned copper monitoring cores in interstices); (03) TPV Elastomer Inner Bedding (Extruded black thermoplastic vulcanizate inner sheath rounding core lay-up); (04) Overall Tinned Copper Braid (85%) (85% coverage tinned copper braid for VFD EMC & mechanical earth fault protection); (05) Submersible Blue TPV Outer Sheath (Heavy-duty oil-, acid- and abrasion-resistant blue TPV jacket (500 m depth)).

What factory test certificates are supplied with 15000BE (OGŁ)?

Every production drum of 15000BE (OGŁ) undergoes routine conductor resistance/continuity, high-voltage dielectric and dimensional testing per AS/NZS 5000.1 / AS/NZS 1125 / PN-90/E-90100, and is delivered with an EN 10204 3.1 factory test certificate.

Request a quote

Get an engineering quote for 15000BE (OGŁ)

Your selection and application details are copied into the enquiry form below.

01Selected sizes

Use + Add next to a size or configuration.

02Reel & motion

Add your operating conditions here to include them in your enquiry.

Reel typeDrum core diameter (mm)Cable length on drum (m)Travel speed (m/min)Max. accelerationCycles per hourLength and quantityAmbient temperatureExposure (outdoor, water, oil, abrasion)Destination countryEquipment and operating conditions

03Message for our engineers

15000BE (OGŁ) 0.6/1 kV Submersible Mine Pump Cable

Selected sizes:


Reel & motion:
- Reel type: 
- Drum core diameter (mm): 
- Cable length on drum (m): 
- Travel speed (m/min): 
- Max. acceleration: 
- Cycles per hour: 
- Length and quantity: 
- Ambient temperature: 
- Exposure (outdoor, water, oil, abrasion): 
- Destination country: 
- Equipment and operating conditions:

Send via WhatsApp