1 / 5

Product

subsea ROV umbilical, AUV tether & sonar tow cable DNV-ST-E402 / IEC 60092600 V (-40 to +80 °C)Subsea / Marine Outer Protective She

Type 2009CC Subsea Power and Data CableDNV-ST-E402 / IEC 60092 — 600 V — -40 to +80 °C Subsea & Marine Cable

Type 2009CC Subsea Power and Data Cable featuring power supply conductors (4 cores) and subsea / marine outer protective sheath (DNV-ST-E402 / IEC 60092, 600 V, -40 to +80 °C, min. bend radius 6 × OD).

Water-resistant

EMC screen

Outdoor & humid

Approved

Configuration

Order designation: Type 2009CC Subsea Hybrid 2×2×0.50 mm²
Outer Ø ≈: 8.4 mm
Net weight ≈: 98 kg/km
Max. pulling ≈: 2.5 kN
Core / stranding: Stranded SnCu + Foil/TCWB + Subsea PUR

All sizes (3)

Request a quote Datasheet WhatsApp info@tebaoflex.com

Engineering reply in 2 business hoursCut-to-length export drumsEN 10204 3.1 certificate per drum

Rated voltage: 600 V
Operating temp.: −40…+80 °C
Min. bend radius: 6 × OD
Core / conductor: Power Supply Con
Outer protection: Subsea / Marine
Standard: DNV-ST-E402 / IE

Typical values for this cable type, based on DNV-ST-E402 Type 2009CC Subsea Power & Data Composite Cable Standard — confirmed in the datasheet and quotation for your order.

Application fit

Is Type 2009CC Subsea Hybrid right for your machine?

Immersion & wet locations

Suitable

Hydrolysis-resistant subsea PUR or HDPE outer sheath and water-blocked core interstices withstand continuous deep-ocean hydrostatic immers

Vertical / spreader reel

Suitable

Contra-helical galvanized steel wire armour or high-modulus aramid/LCP braid supports vertical traction winches, TMS cages and tow sheaves

Free-hanging vertical run

Suitable

Torque-balanced armour or neutrally buoyant foamed-PUR jacket prevents hockling and kinking during free-swimming ROV and tether excursions

Offshore platform & shipboard deck trays

Suitable

Resists seawater, marine bio-fouling, hydraulic oil, UV radiation and abrasion across vessel A-frames and launch-and-recovery systems (LAR

Energy chain / drag chain

Not suitable

Subsea ROV umbilicals and tow cables are optimized for winch deployment and water-column catenaries rather than high-speed factory drag ch

Use Drag-Chain Feeder Cable

Typical machinesUnderwater & Ocean ExplorationWork-Class & Observation ROV Umbilicals and TMS TethersOffshore Aquaculture Net Cleaners & Subsea Cage InspectionAUV, Ocean Glider & Expendable Spool-Payoff Micro-TethersUSV Towed Sonar Arrays, Seabed Crawlers & Subsea Trenchers

Construction

Layer by layer

Shown: Type 2009CC Subsea Hybrid (DNV-ST-E402 Type 2009CC Subsea Power & Data Composite Cable Standard) featuring power supply conductors (4 cores), shielded data twisted pairs (4×2) and subsea / marine outer protective sheath (3-layer construction).

Type 2009CC Subsea Hybrid — stepped horizontal cutaway showing Power Supply Conductors (4 Cores) and Subsea / Marine O — Layer cutaway

#	Layer	Material & reference
1	Power Supply Conductors (4 Cores)	Stranded copper power cores with Cross-linked polyethylene (XLPE) insulation
2	Shielded Data Twisted Pairs (4×2)	Impedance-controlled twisted pairs for Ethernet / RS-485 / DMX
3	Subsea / Marine Outer Protective Sheath	Black hydrolysis- & abrasion-resistant marine Polyurethane (PUR) outer sheath

Type 2009CC Subsea Hybrid — Standard Subsea & Marine Execution

Built to DNV-ST-E402 Type 2009CC Subsea Power & Data Composite Cable Standard with power supply conductors (4 cores) and subsea / marine outer protective sheath

Type 2009CC Subsea Hybrid — Custom Winch Length / Molded Termination

Available on continuous export winch drums or factory-terminated with subsea wet-mate / mechanical sockets

Type 2009CC Subsea Hybrid — Hydrostatic & Routine Certified

Supplied with EN 10204 3.1 routine dielectric, conductor/optical continuity & hydrostatic qualification report

Technical data

Ratings & operating limits

Typical values: Typical values for this cable type, based on DNV-ST-E402 Type 2009CC Subsea Power & Data Composite Cable Standard. Values for your order are confirmed in the datasheet and quotation.

Electrical

Rated voltage / operating system: 600 V (DNV-ST-E402 Type 2009CC Subsea Power & Data Composite Cable Standard)
Core / conductor construction: Power Supply Conductors (4 Cores) — Stranded copper power cores with Cross-linked polyethylene (XLPE) insulation
Primary dielectric / optical buffer: Shielded Data Twisted Pairs (4×2) — Impedance-controlled twisted pairs for Ethernet / RS-485 / DMX

Thermal

Continuous operating temperature: −40…+80 °C (submerged seawater & topside deck service)
Hydrostatic & thermal cycling endurance: Verified cold-bend and wet dielectric stability across −40…+80 °C per DNV-ST-E402 Type 2009CC Subsea Power & Data Composite Cable Standard
Storage & transport temperature: −40…+80 °C on export wooden/steel cable drum

Mechanical

Outer jacket / sheath protection: Subsea / Marine Outer Protective Sheath — Black hydrolysis- & abrasion-resistant marine Polyurethane (PUR) outer sheath
Minimum bending radius: 6 × OD
Reinforcement / screen / bedding layer: Shielded Data Twisted Pairs (4×2) — Impedance-controlled twisted pairs for Ethernet / RS-485 / DMX

Resistance

Seawater, hydrolysis & oil resistance: Resistant to permanent seawater immersion, hydrolysis, hydraulic oil and bio-fouling per DNV-ST-E402 Type 2009CC Subsea Power & Data Composite Cable Standard
Hydrostatic pressure & water blocking: Radial and longitudinal water-blocking integrity verified per DNV-ST-E402 Type 2009CC Subsea Power & Data Composite Cable Standard
RoHS & REACH compliance: RoHS 2 (2011/65/EU + 2015/863) & REACH SVHC compliant

Reference standards

Governing standard: DNV-ST-E402 Type 2009CC Subsea Power & Data Composite Cable Standard
Subsea & conductor qualification standards: IEC 60228 / DNV-ST-E402 / ISO 13628-5 / IEC 60794 / EN 10204
Quality management & inspection: ISO 9001:2015 & EN 10204 3.1 factory routine inspection

Identification

Model designation: Type 2009CC Subsea Hybrid
Sheath colour & metre marking: Continuous metre-marked black outer finish (Subsea / Marine )
Customs tariff (HS): 8544.49 / 8544.60 / 8544.70

Sizes

3 standard Type 2009CC Subsea Hybrid configurations

Manufactured to DNV-ST-E402 Type 2009CC Subsea Power & Data Composite Cable Standard for subsea robotics, ROV umbilicals, marine aquaculture and offshore sensor applications.

Dimensions, tensile load & weights
Order designation	Configuration	Core / stranding	Outer Ø ≈ mm	Net weight ≈ kg/km	Max. pulling kN ≈	Min. bend R mm
Type 2009CC Subsea Hybrid Construction Schedule (−40…+80 °C)
Type 2009CC Subsea Hybrid 2×2×0.50 mm²	2 × 2 × 0.50 mm² (20 AWG) + Vent/Drain	Stranded SnCu + Foil/TCWB + Subsea PUR	8.4	98	2.5	50
Type 2009CC Subsea Hybrid 4×2×0.50 + 2×1.5	4 × 2 × 0.50 + 2 × 1.5 mm² Hybrid	Stranded SnCu + Individual/Overall Shield	11.8	195	5.2	70
Type 2009CC Subsea Hybrid 4×2×0.75 + 4×2.5	4 × 2 × 0.75 + 4 × 2.5 mm² Subsea	Stranded SnCu + Aramid/Armour + PUR	15.2	360	12.0	95

Typical values for this cable type; dimensions and weights for your order are confirmed in the quotation.
Custom core counts, optical fiber channels, wet-mate terminations and continuous winch lengths available per DNV-ST-E402 Type 2009CC Subsea Power & Data Composite Cable Standard.

Electrical, optical & thermal parameters
Configuration	Max. DC R₂₀ Ω/km	Rating / Impedance / Load	Operating temp.
2 × 2 × 0.50 mm² (20 AWG) + Vent/Drain	39.00	600 V (4–20 mA / DO)	−40…+80 °C
4 × 2 × 0.50 + 2 × 1.5 mm² Hybrid	39.00	600 V (CTD / Multi-Sensor)	−40…+80 °C
4 × 2 × 0.75 + 4 × 2.5 mm² Subsea	26.00	600 V (ROV / Camera / LED)	−40…+80 °C

Every production length undergoes routine conductor DC resistance / OTDR optical attenuation, AC dielectric and dimensional verification.

Quality & approvals

Testing & inspection

Routine tests on every production length, sample and type tests per batch — documented on an EN 10204 3.1 inspection certificate.

ConductorClass 5 stranding
Spark test100 % in-line
Lay-upCores, earth, fillers
SheathingInner, braid / screen, outer
Electrical testsAC voltage, resistance
DimensionsOD, wall thickness
Inspection documents & dispatchDrum & dispatch

Testing & inspection	Test value / reference	Frequency
Routine tests
Conductor DC resistance / OTDR optical & dimensional check (DNV-ST-E402 Type 2009CC Subsea Power & Data Composite Cable Standard)	DC resistance at 20 °C, optical attenuation and wall thickness within DNV-ST-E402 Type 2009CC Subsea Power & Data Composite Cable Standard limits	Every manufactured drum length
AC high-voltage dielectric & insulation resistance test (DNV-ST-E402 Type 2009CC Subsea Power & Data Composite Cable Standard)	Zero dielectric breakdown and verified wet insulation resistance for 600 V rating	Every manufactured drum length
Sample tests
Hydrostatic pressure, tensile load & seawater immersion qualification (DNV-ST-E402 Type 2009CC Subsea Power & Data Composite Cable Standard)	Verified hydrostatic pressure integrity, breaking load and flex endurance across −40…+80 °C	Type qualification & periodic lot audit

Inspection certificate

Issued with every drum, listing the routine test results for that length.

Product approvals

DNV-ST-E402 / IEC 60092 CompliantEN 10204 3.1 Factory Test CertificateCE, RoHS 2 (2011/65/EU) & REACH

Company certificates

ISO 9001ISO 14001ISO 45001VDE marks approvalUL / cULCE · LVD / EMC

Marking & supply

Ordering & delivery

Sheath marking

TEBAOFLEX Type 2009CC Subsea Hybrid DNV-ST-E402 / IEC 60092 600 V CE

Delivery form: Heavy-duty export fumigated wooden drums, steel winch reels or pre-terminated subsea assemblies
Standard lengths: 500 m, 1,000 m, 3,000 m continuous winch lengths or custom cut-to-length subsea jumpers
MOQ: 100 m (standard configurations) · 300 m (custom subsea builds)
Lead time: 2–4 weeks ex-works
Incoterms: EXW, FCA, FOB, CIF, DAP

Technical documents

Downloads

PDFType 2009CC Subsea Power and Data Cable – technical datasheet3 sizes · construction, technical data, approvals XLSXType 2009CC Subsea Hybrid spec data (Excel)All 3 sizes with dimensions and data, for your BOM or quotation

Revision: 2026-10-29
Updated: 2026-10-29

FAQ

Questions engineers ask first

Not covered here? Send your drawing — an engineer replies within 2 business hours.

What governing standard and construction define Type 2009CC Subsea Hybrid (Type 2009CC Subsea Power and Data Cable)?

Type 2009CC Subsea Hybrid (Type 2009CC Subsea Power and Data Cable) is manufactured in accordance with DNV-ST-E402 Type 2009CC Subsea Power & Data Composite Cable Standard for 600 V subsea,ROV and marine aquaculture service over -40 to +80 °C. Its 3-layer construction comprises power supply conductors (4 cores), shielded data twisted pairs (4×2) and subsea / marine outer protective sheath.

What is the minimum bending radius and operating temperature range for Type 2009CC Subsea Hybrid?

The minimum bending radius for Type 2009CC Subsea Hybrid is 6 × OD across its continuous operating temperature range of -40 to +80 °C, ensuring mechanical flex endurance and hydrostatic reliability in subsea winches, TMS cages and aquaculture installations.

How are the concentric layers of Type 2009CC Subsea Hybrid arranged from inside to outside?

From inside to outside, the construction sequence is: (01) Power Supply Conductors (4 Cores) — Stranded copper power cores with Cross-linked polyethylene (XLPE) insulation; (02) Shielded Data Twisted Pairs (4×2) — Impedance-controlled twisted pairs for Ethernet / RS-485 / DMX; (03) Subsea / Marine Outer Protective Sheath — Black hydrolysis- & abrasion-resistant marine Polyurethane (PUR) outer sheath.

What factory test certificates are supplied with Type 2009CC Subsea Hybrid?

Every production drum of Type 2009CC Subsea Hybrid undergoes routine conductor DC resistance / optical OTDR continuity, AC high-voltage dielectric and dimensional testing per DNV-ST-E402 Type 2009CC Subsea Power & Data Composite Cable Standard, and is delivered with an EN 10204 3.1 factory test certificate.

Request a quote

Get an engineering quote for Type 2009CC Subsea Hybrid

Your selection and application details are copied into the enquiry form below.

01Selected sizes

Use + Add next to a size or configuration.

02Reel & motion

Add your operating conditions here to include them in your enquiry.

Reel typeDrum core diameter (mm)Cable length on drum (m)Travel speed (m/min)Max. accelerationCycles per hourLength and quantityAmbient temperatureExposure (outdoor, water, oil, abrasion)Destination countryEquipment and operating conditions

03Message for our engineers

Type 2009CC Subsea Hybrid Type 2009CC Subsea Power and Data Cable

Selected sizes:


Reel & motion:
- Reel type: 
- Drum core diameter (mm): 
- Cable length on drum (m): 
- Travel speed (m/min): 
- Max. acceleration: 
- Cycles per hour: 
- Length and quantity: 
- Ambient temperature: 
- Exposure (outdoor, water, oil, abrasion): 
- Destination country: 
- Equipment and operating conditions:

Send via WhatsApp