1 / 5

Product

subsea Ethernet, RS-485 & sonar coaxial data cable ISO/IEC 11801 / MIL-DTL-24643300 V (-40 to +85 °C)Subsea / Marine Outer Protective She

Tactical Aramid Camera & Crawler Data CableISO/IEC 11801 / MIL-DTL-24643 — 300 V — -40 to +85 °C Subsea & Marine Cable

Tactical Aramid Camera & Crawler Data Cable featuring stranded copper twisted pairs (4×2) and subsea / marine outer protective sheath (ISO/IEC 11801 / MIL-DTL-24643, 300 V, -40 to +85 °C, min. bend radius 6 × OD).

Water-resistant

EMC screen

Outdoor & humid

Approved

Configuration

Order designation: Tactical Aramid Crawler Data Cable 2×2×0.50 mm²
Outer Ø ≈: 8.4 mm
Net weight ≈: 98 kg/km
Max. pulling ≈: 2.5 kN
Core / stranding: Stranded SnCu + Foil/TCWB + Subsea PUR

All sizes (3)

Request a quote Datasheet WhatsApp info@tebaoflex.com

Engineering reply in 2 business hoursCut-to-length export drumsEN 10204 3.1 certificate per drum

Rated voltage: 300 V
Operating temp.: −40…+85 °C
Min. bend radius: 6 × OD
Core / conductor: Stranded Copper
Outer protection: Subsea / Marine
Standard: ISO/IEC 11801 /

Typical values for this cable type, based on ISO/IEC 11801 Tactical Aramid Camera & Subsea Crawler Data Cable Standard — confirmed in the datasheet and quotation for your order.

Application fit

Is Tactical Aramid Crawler Data Cable right for your machine?

Immersion & wet locations

Suitable

Longitudinal water-blocking compounds and high-pressure subsea PUR/PE jackets survive up to 600 bar (6,000 m) hydrostatic immersion.

Fixed installation

Suitable

Controlled 100 Ω Ethernet, 120 Ω RS-485 and 50/75 Ω coaxial impedance ensures low-attenuation telemetry across subsea arrays.

Free-hanging vertical run

Suitable

Stranded tinned copper conductors and braided shields tolerate ROV tether flexing, buoy moorings and subsea frame routing.

Offshore platform & shipboard deck trays

Suitable

NEK 606 MUD-resistant LSHF and UV-stabilized PUR jackets withstand offshore topside trays and wet deck splash zones.

Motorised monospiral reel

Not suitable

Unarmoured sensor bus and coax cables require strain relief and are not intended for unguided high-tension crane drums.

Use 1SSA13 Armoured Coax Tow

Typical machinesUnderwater & Ocean Exploration6,000 m Full-Ocean-Depth ROV Gigabit Ethernet & HD VideoAquaculture Cage RS-485 / Modbus Environmental TelemetryMultibeam Sonar, CTD & Hydrophone Coaxial Signal LinksNEK 606 Offshore Platform & Vessel Data Networks

Construction

Layer by layer

Shown: Tactical Aramid Crawler Data Cable (ISO/IEC 11801 Tactical Aramid Camera & Subsea Crawler Data Cable Standard) featuring stranded copper twisted pairs (4×2), copper wire braid emc screen and subsea / marine outer protective sheath (4-layer construction).

Tactical Aramid Crawler Data Cable — stepped horizontal cutaway showing Stranded Copper Twisted Pairs (4×2) and Subsea — Layer cutaway

#	Layer	Material & reference
1	Stranded Copper Twisted Pairs (4×2)	Twisted pairs with Fluoropolymer (FEP/ETFE) high-dielectric insulation
2	Copper Wire Braid EMC Screen	High-coverage braided copper shield for EMI/VFD protection
3	Aramid / LCP Braided Strength Member	High-tenacity synthetic fiber braid absorbing dynamic tension
4	Subsea / Marine Outer Protective Sheath	Black hydrolysis- & abrasion-resistant marine Polyurethane (PUR) outer sheath

Tactical Aramid Crawler Data Cable — Standard Subsea & Marine Execution

Built to ISO/IEC 11801 Tactical Aramid Camera & Subsea Crawler Data Cable Standard with stranded copper twisted pairs (4×2) and subsea / marine outer protective sheath

Tactical Aramid Crawler Data Cable — Custom Winch Length / Molded Termination

Available on continuous export winch drums or factory-terminated with subsea wet-mate / mechanical sockets

Tactical Aramid Crawler Data Cable — Hydrostatic & Routine Certified

Supplied with EN 10204 3.1 routine dielectric, conductor/optical continuity & hydrostatic qualification report

Technical data

Ratings & operating limits

Typical values: Typical values for this cable type, based on ISO/IEC 11801 Tactical Aramid Camera & Subsea Crawler Data Cable Standard. Values for your order are confirmed in the datasheet and quotation.

Electrical

Rated voltage / operating system: 300 V (ISO/IEC 11801 Tactical Aramid Camera & Subsea Crawler Data Cable Standard)
Core / conductor construction: Stranded Copper Twisted Pairs (4×2) — Twisted pairs with Fluoropolymer (FEP/ETFE) high-dielectric insulation
Primary dielectric / optical buffer: Copper Wire Braid EMC Screen — High-coverage braided copper shield for EMI/VFD protection

Thermal

Continuous operating temperature: −40…+85 °C (submerged seawater & topside deck service)
Hydrostatic & thermal cycling endurance: Verified cold-bend and wet dielectric stability across −40…+85 °C per ISO/IEC 11801 Tactical Aramid Camera & Subsea Crawler Data Cable Standard
Storage & transport temperature: −40…+80 °C on export wooden/steel cable drum

Mechanical

Outer jacket / sheath protection: Subsea / Marine Outer Protective Sheath — Black hydrolysis- & abrasion-resistant marine Polyurethane (PUR) outer sheath
Minimum bending radius: 6 × OD
Reinforcement / screen / bedding layer: Aramid / LCP Braided Strength Member — High-tenacity synthetic fiber braid absorbing dynamic tension

Resistance

Seawater, hydrolysis & oil resistance: Resistant to permanent seawater immersion, hydrolysis, hydraulic oil and bio-fouling per ISO/IEC 11801 Tactical Aramid Camera & Subsea Crawler Data Cable Standard
Hydrostatic pressure & water blocking: Radial and longitudinal water-blocking integrity verified per ISO/IEC 11801 Tactical Aramid Camera & Subsea Crawler Data Cable Standard
RoHS & REACH compliance: RoHS 2 (2011/65/EU + 2015/863) & REACH SVHC compliant

Reference standards

Governing standard: ISO/IEC 11801 Tactical Aramid Camera & Subsea Crawler Data Cable Standard
Subsea & conductor qualification standards: IEC 60228 / DNV-ST-E402 / ISO 13628-5 / IEC 60794 / EN 10204
Quality management & inspection: ISO 9001:2015 & EN 10204 3.1 factory routine inspection

Identification

Model designation: Tactical Aramid Crawler Data Cable
Sheath colour & metre marking: Continuous metre-marked black outer finish (Subsea / Marine )
Customs tariff (HS): 8544.49 / 8544.60 / 8544.70

Sizes

3 standard Tactical Aramid Crawler Data Cable configurations

Manufactured to ISO/IEC 11801 Tactical Aramid Camera & Subsea Crawler Data Cable Standard for subsea robotics, ROV umbilicals, marine aquaculture and offshore sensor applications.

Dimensions, tensile load & weights
Order designation	Configuration	Core / stranding	Outer Ø ≈ mm	Net weight ≈ kg/km	Max. pulling kN ≈	Min. bend R mm
Tactical Aramid Crawler Data Cable Construction Schedule (−40…+85 °C)
Tactical Aramid Crawler Data Cable 2×2×0.50 mm²	2 × 2 × 0.50 mm² (20 AWG) + Vent/Drain	Stranded SnCu + Foil/TCWB + Subsea PUR	8.4	98	2.5	50
Tactical Aramid Crawler Data Cable 4×2×0.50 + 2×	4 × 2 × 0.50 + 2 × 1.5 mm² Hybrid	Stranded SnCu + Individual/Overall Shield	11.8	195	5.2	70
Tactical Aramid Crawler Data Cable 4×2×0.75 + 4×	4 × 2 × 0.75 + 4 × 2.5 mm² Subsea	Stranded SnCu + Aramid/Armour + PUR	15.2	360	12.0	95

Typical values for this cable type; dimensions and weights for your order are confirmed in the quotation.
Custom core counts, optical fiber channels, wet-mate terminations and continuous winch lengths available per ISO/IEC 11801 Tactical Aramid Camera & Subsea Crawler Data Cable Standard.

Electrical, optical & thermal parameters
Configuration	Max. DC R₂₀ Ω/km	Rating / Impedance / Load	Operating temp.
2 × 2 × 0.50 mm² (20 AWG) + Vent/Drain	39.00	300 V (4–20 mA / DO)	−40…+85 °C
4 × 2 × 0.50 + 2 × 1.5 mm² Hybrid	39.00	300 V (CTD / Multi-Sensor)	−40…+85 °C
4 × 2 × 0.75 + 4 × 2.5 mm² Subsea	26.00	300 V (ROV / Camera / LED)	−40…+85 °C

Every production length undergoes routine conductor DC resistance / OTDR optical attenuation, AC dielectric and dimensional verification.

Quality & approvals

Testing & inspection

Routine tests on every production length, sample and type tests per batch — documented on an EN 10204 3.1 inspection certificate.

ConductorClass 5 stranding
Spark test100 % in-line
Lay-upCores, earth, fillers
SheathingInner, braid / screen, outer
Electrical testsAC voltage, resistance
DimensionsOD, wall thickness
Inspection documents & dispatchDrum & dispatch

Testing & inspection	Test value / reference	Frequency
Routine tests
Conductor DC resistance / OTDR optical & dimensional check (ISO/IEC 11801 Tactical Aramid Camera & Subsea Crawler Data Cable Standard)	DC resistance at 20 °C, optical attenuation and wall thickness within ISO/IEC 11801 Tactical Aramid Camera & Subsea Crawler Data Cable Standard limits	Every manufactured drum length
AC high-voltage dielectric & insulation resistance test (ISO/IEC 11801 Tactical Aramid Camera & Subsea Crawler Data Cable Standard)	Zero dielectric breakdown and verified wet insulation resistance for 300 V rating	Every manufactured drum length
Sample tests
Hydrostatic pressure, tensile load & seawater immersion qualification (ISO/IEC 11801 Tactical Aramid Camera & Subsea Crawler Data Cable Standard)	Verified hydrostatic pressure integrity, breaking load and flex endurance across −40…+85 °C	Type qualification & periodic lot audit

Inspection certificate

Issued with every drum, listing the routine test results for that length.

Product approvals

ISO/IEC 11801 / MIL-DTL-24643 CompliantEN 10204 3.1 Factory Test CertificateCE, RoHS 2 (2011/65/EU) & REACH

Company certificates

ISO 9001ISO 14001ISO 45001VDE marks approvalUL / cULCE · LVD / EMC

Marking & supply

Ordering & delivery

Sheath marking

TEBAOFLEX Tactical Aramid Crawler Data Cable ISO/IEC 11801 / MIL-DTL-24643 300 V CE

Delivery form: Heavy-duty export fumigated wooden drums, steel winch reels or pre-terminated subsea assemblies
Standard lengths: 500 m, 1,000 m, 3,000 m continuous winch lengths or custom cut-to-length subsea jumpers
MOQ: 100 m (standard configurations) · 300 m (custom subsea builds)
Lead time: 2–4 weeks ex-works
Incoterms: EXW, FCA, FOB, CIF, DAP

Technical documents

Downloads

PDFTactical Aramid Camera & Crawler Data Cable – technical datasheet3 sizes · construction, technical data, approvals XLSXTactical Aramid Crawler Data Cable spec data (Excel)All 3 sizes with dimensions and data, for your BOM or quotation

Revision: 2026-10-29
Updated: 2026-10-29

FAQ

Questions engineers ask first

Not covered here? Send your drawing — an engineer replies within 2 business hours.

What governing standard and construction define Tactical Aramid Crawler Data Cable (Tactical Aramid Camera & Crawler Data Cable)?

Tactical Aramid Crawler Data Cable (Tactical Aramid Camera & Crawler Data Cable) is manufactured in accordance with ISO/IEC 11801 Tactical Aramid Camera & Subsea Crawler Data Cable Standard for 300 V subsea,ROV and marine aquaculture service over -40 to +85 °C. Its 4-layer construction comprises stranded copper twisted pairs (4×2), copper wire braid emc screen and subsea / marine outer protective sheath.

What is the minimum bending radius and operating temperature range for Tactical Aramid Crawler Data Cable?

The minimum bending radius for Tactical Aramid Crawler Data Cable is 6 × OD across its continuous operating temperature range of -40 to +85 °C, ensuring mechanical flex endurance and hydrostatic reliability in subsea winches, TMS cages and aquaculture installations.

How are the concentric layers of Tactical Aramid Crawler Data Cable arranged from inside to outside?

From inside to outside, the construction sequence is: (01) Stranded Copper Twisted Pairs (4×2) — Twisted pairs with Fluoropolymer (FEP/ETFE) high-dielectric insulation; (02) Copper Wire Braid EMC Screen — High-coverage braided copper shield for EMI/VFD protection; (03) Aramid / LCP Braided Strength Member — High-tenacity synthetic fiber braid absorbing dynamic tension; (04) Subsea / Marine Outer Protective Sheath — Black hydrolysis- & abrasion-resistant marine Polyurethane (PUR) outer sheath.

What factory test certificates are supplied with Tactical Aramid Crawler Data Cable?

Every production drum of Tactical Aramid Crawler Data Cable undergoes routine conductor DC resistance / optical OTDR continuity, AC high-voltage dielectric and dimensional testing per ISO/IEC 11801 Tactical Aramid Camera & Subsea Crawler Data Cable Standard, and is delivered with an EN 10204 3.1 factory test certificate.

Request a quote

Get an engineering quote for Tactical Aramid Crawler Data Cable

Your selection and application details are copied into the enquiry form below.

01Selected sizes

Use + Add next to a size or configuration.

02Reel & motion

Add your operating conditions here to include them in your enquiry.

Reel typeDrum core diameter (mm)Cable length on drum (m)Travel speed (m/min)Max. accelerationCycles per hourLength and quantityAmbient temperatureExposure (outdoor, water, oil, abrasion)Destination countryEquipment and operating conditions

03Message for our engineers

Tactical Aramid Camera & Crawler Data Cable

Selected sizes:


Reel & motion:
- Reel type: 
- Drum core diameter (mm): 
- Cable length on drum (m): 
- Travel speed (m/min): 
- Max. acceleration: 
- Cycles per hour: 
- Length and quantity: 
- Ambient temperature: 
- Exposure (outdoor, water, oil, abrasion): 
- Destination country: 
- Equipment and operating conditions:

Send via WhatsApp