矿井巷道与隧道壁挂敷设
每对线芯独立的铜丝编织屏蔽加专用 PVC 分护套,实现线对间的电气与机械隔离。
产品主图
YnHTKGX 150/250 V mining telecom 与 instrumentation pair cable combining a central 1.0 mm² green/yellow protective 导体 配有 0.8 mm PE twisted pairs, each 配有 a 0.8 mm drain wire, 铜 braid screen 与 PVC sub-jacket under a grey Yn PVC sheath.
本电缆型号的典型值(依据 PN-G-91006 / IEC 60079-14(技术规格))——具体订单参数将在技术规格书与报价单中确认。
应用工况
YnHTKGX 150/250 V mining telecom 与 instrumentation pair cable combining a central 1.0 mm² green/yellow protective 导体 配有 0.8 mm PE twisted pairs, each 配有 a 0.8 mm drain wire, 铜 braid screen 与 PVC sub-jacket under a grey Yn PVC sheath.
每对线芯独立的铜丝编织屏蔽加专用 PVC 分护套,实现线对间的电气与机械隔离。
中心 1.0 mm² 黄绿双色镀锡铜保护接地导体沿矿井巷道提供连续接地基准。
Low-loss polyethylene (PE) pair dielectric supports long-distance underground RS-485, methanometry 与 intercom links.
电缆结构
Shown: YnHTKGX (PN-G-91006 / IEC 60079-14) featuring central protective 导体, telecom pairs (4x2x0.8 mm) 与 overall 外护套 (5-layer construction).
| # | 结构层 | 材料与参考标准 |
|---|---|---|
| 1 | Central Protective Conductor(技术规格) | Central 1.0 mm² solid 镀锡 铜 protective earth 导体 insulated 配有 green/yellow PVC at the cable axisPN-G-91006 / IEC 60079-14(技术规格) |
| 2 | Telecom Pairs (4x2x0.8 mm)(技术规格) | Four twisted telecommunication pairs of 0.8 mm Class 1 solid bare 铜 导体s 配有 low-loss red 与 blue polyethylene (PE) 绝缘PN-G-91006 / IEC 60079-14(技术规格) |
| 3 | Per-Pair Drain & Copper Braid(技术规格) | Longitudinal 0.8 mm 镀锡 铜 drain wire 与 individual bare 铜 wire braid screen (>= 75% coverage) over each pairPN-G-91006 / IEC 60079-14(技术规格) |
| 4 | Per-Pair Individual PVC Jacket(技术规格) | Extruded individual polyvinyl chloride (PVC) sub-jacket isolating each 屏蔽 pair mechanically 与 electricallyPN-G-91006 / IEC 60079-14(技术规格) |
| 5 | Overall 外护套 | 重型 grey flame-retardant mining polyvinyl chloride (Yn PVC) overall 外护套PN-G-91006 / IEC 60079-14(技术规格) |
Built 至 PN-G-91006 / IEC 60079-14 配有 central protective 导体 与 overall 外护套
Available in custom drum lengths, core counts or factory-terminated assemblies(技术规格)
Supplied 配有 EN 10204 3.1 routine electrical, dielectric & dimensional inspection report
技术数据
规格尺寸
按 PN-G-91006 / IEC 60079-14 制造,适用于重型工业与特种工程系统。
| 订货型号 | 规格配置 | 导体 / 绞合结构 | 近似外径 ≈ mm | 近似重量 ≈ kg/km | Tensile load kN ≈(技术规格) | 最小弯曲半径 mm | 询价 |
|---|---|---|---|---|---|---|---|
| YnHTKGX Construction Schedule (−30…+70 °C)(技术规格) | |||||||
| YnHTKGX 2×2×0.8 + 1.0 mm² | 2×2×0.8 mm + 1×1.0 mm² PE(技术规格) | Solid Cu + per-pair braid & jacket(技术规格) | 12.6 | 195 | 0.9 | 126 | |
| YnHTKGX 4×2×0.8 + 1.0 mm² | 4×2×0.8 mm + 1×1.0 mm² PE(技术规格) | Solid Cu + per-pair braid & jacket(技术规格) | 15.8 | 325 | 1.6 | 158 | |
| YnHTKGX 7×2×0.8 + 1.0 mm² | 7×2×0.8 mm + 1×1.0 mm² PE(技术规格) | Solid Cu + per-pair braid & jacket(技术规格) | 19.4 | 510 | 2.6 | 194 | |
| YnHTKGX 10×2×0.8 + 1.0 mm² | 10×2×0.8 mm + 1×1.0 mm² PE(技术规格) | Solid Cu + per-pair braid & jacket(技术规格) | 23.6 | 715 | 3.6 | 236 | |
| 规格配置 | 20 °C 最大直流电阻 / 衰减 Ω/km 或 dB/km (DC) | Rating / Capacity(技术规格) | 工作温度 |
|---|---|---|---|
| 2×2×0.8 + 1.0 mm²(技术规格) | 36.60 | 150/250 V / ≤75 nF/km(技术规格) | −30…+70 °C |
| 4×2×0.8 + 1.0 mm²(技术规格) | 36.60 | 150/250 V / ≤75 nF/km(技术规格) | −30…+70 °C |
| 7×2×0.8 + 1.0 mm²(技术规格) | 36.60 | 150/250 V / ≤75 nF/km(技术规格) | −30…+70 °C |
| 10×2×0.8 + 1.0 mm²(技术规格) | 36.60 | 150/250 V / ≤75 nF/km(技术规格) | −30…+70 °C |
质量与认证
每根出厂长度均经例行试验,按批次进行抽样与型式试验,并随附 EN 10204 3.1 检验证书。
| 测试与检验 | 试验值/参考标准 | 频次 |
|---|---|---|
| 例行试验 | ||
| Conductor resistance & dimensional verification (PN-G-91006 / IEC 60079-14)(技术规格) | Electrical parameters 与 outer diameter within PN-G-91006 / IEC 60079-14 tolerances | 每一出厂盘长 / 交货长度 |
| High-voltage dielectric & 绝缘 resistance test (PN-G-91006 / IEC 60079-14) | Zero dielectric breakdown 与 verified 绝缘 resistance over full length | 每一出厂盘长 / 交货长度 |
| 抽样试验 | ||
| Thermal ageing, mechanical flexing & environmental qualification (PN-G-91006 / IEC 60079-14)(技术规格) | Verified structural 与 dielectric integrity across −30…+70 °C | 型式试验与定期批次抽检 |
标识与供货
护套印字
常见问题
未涵盖您的问题?欢迎发送图纸或工况,工程师将在 2 个工作小时内回复。
获取报价
所选规格与工况将一起带入下方询价表单。